⬆️ Bump gradle/actions from 3 to 4

[dependabot[bot]]

Bumps gradle/actions from 3 to 4.

Release notes

Sourced from gradle/actions's releases.

v4.0.0-rc.1

First release candidate for v4 of the setup-gradle, dependency-submission and wrapper-validation actions provided under gradle/actions. This is the first release available under the v4 tag.

Major changes from the v3 release

Cache cleanup enabled by default

After a number of fixes and improvements, this release enables cache-cleanup by default for all Jobs using the setup-gradle and dependency-submission actions.

Improvements and bugfixes related cache cleanup:

• By default, cache cleanup is not run if any Gradle build fails (#71)
• Cache cleanup is not run after configuration-cache reuse (#19)

This feature should help to minimize the size of entries written to the GitHub Actions cache, speeding up builds and reducing cache usage.

Wrapper validation enabled by default

In v3, the setup-gradle action was enhanced to support Gradle wrapper validation, removing the need to use a separate workflow file with the gradle/actions/wrapper-validation action.

With this release, wrapper validation has been significantly improved, and is now enabled by default (#12):

• The allow-snapshot-wrappers makes it possible to validate snapshot wrapper jars using setup-gradle.
• Checksums for nightly and snapshot Gradle versions are now validated (#281).
• Valid wrapper checksums are cached in Gradle User Home, reducing the need to retrieve checksum values remotely (#172).
• Reduce network calls in wrapper-validation for new Gradle versions: By only fetching wrapper checksums for Gradle versions that were not known when this action was released, this release reduces the likelihood that a network failure could cause failure in wrapper validation (#171)
• Improved error message when wrapper-validation finds no wrapper jars (#284)

Wrapper validation is important for supply-chain integrity. Enabling this feature by default will increase the coverage of wrapper validation on projects using GitHub Actions.

New input parameters for Dependency Graph generation

Some dependency-graph inputs that could previously only be configured via environment variables now have dedicated action inputs:

• dependency-graph-report-dir: sets the location where dependency-graph reports will be generated
• dependency-graph-exclude-projects and dependency-graph-include-projects: select which Gradle projects will contribute to the generated dependency graph.
• dependency-graph-exclude-configurations and dependency-graph-include-configurations: select which Gradle configurations will contribute to the generated dependency graph.

Other improvements

• In Job summary, the action now provides an explanation when cache is set to read-only or disabled (#255)
• When setup-gradle requests a specific Gradle version, the action will no longer download and install that version if it is already available on the PATH of the runner (#270)
• To attempt to speed up builds, the setup-gradle and dependency-submission actions now attempt to use the D: drive for Gradle User Home if it is available (#290)

Deprecations and breaking changes

• The gradle-home-cache-cleanup input parameter has been deprecated and replaced by cache-cleanup
• The undocumented dependency-graph: clear parameter has been removed without replacement
• The following parameters deprecated in v3 have been removed:
  • arguments

... (truncated)

Commits

• af1da67 Prevent concurrent jobs in integ-test-full
• f8ba43c Better names for suite workflows
• bcd07e6 Refactor integ-tests into suites
• d74ee73 Refactor integ-tests
• fb2e693 [bot] Update dist directory
• 0719002 Improve error messages for min-wrapper-count (#321)
• ac3aebd Improve error messages for min-wrapper-count
• d473db0 Add tests for wrapper-validation with insufficient wrappers
• 833b05f [bot] Update dist directory
• 06905c7 Enable wrapper-validation by default in setup-gradle (#318)
• Additional commits viewable in compare view

You can trigger a rebase of this PR by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

Note Automatic rebases have been disabled on this pull request as it has been open for over 30 days.

[github-actions[bot]]

Qodana Community for JVM

5 new problems were found

Inspection name	Severity	Problems
Redundant semicolon	🔶 Warning	1
Boolean literal argument without parameter name	◽️ Notice	2
Return or assignment can be lifted out	◽️ Notice	1
Redundant lambda arrow	◽️ Notice	1

💡 Qodana analysis was run in the pull request mode: only the changed files were checked

View the detailed Qodana report

To be able to view the detailed Qodana report, you can either: - Register at [Qodana Cloud](https://qodana.cloud/) and [configure the action](https://github.com/jetbrains/qodana-action#qodana-cloud) - Use [GitHub Code Scanning with Qodana](https://github.com/jetbrains/qodana-action#github-code-scanning) - Host [Qodana report at GitHub Pages](https://github.com/JetBrains/qodana-action/blob/3a8e25f5caad8d8b01c1435f1ef7b19fe8b039a0/README.md#github-pages) - Inspect and use `qodana.sarif.json` (see [the Qodana SARIF format](https://www.jetbrains.com/help/qodana/qodana-sarif-output.html#Report+structure) for details) To get `*.log` files or any other Qodana artifacts, run the action with `upload-result` option set to `true`, so that the action will upload the files as the job artifacts: ```yaml - name: 'Qodana Scan' uses: JetBrains/qodana-action@v2024.1.8 with: upload-result: true ```

Contact Qodana team

Contact us at [qodana-support@jetbrains.com](mailto:qodana-support@jetbrains.com) - Or via our issue tracker: https://jb.gg/qodana-issue - Or share your feedback: https://jb.gg/qodana-discussions

[patou]

@dependabot recreate

[github-actions[bot]]

Qodana Community for JVM

It seems all right 👌

No new problems were found according to the checks applied

💡 Qodana analysis was run in the pull request mode: only the changed files were checked

View the detailed Qodana report

To be able to view the detailed Qodana report, you can either: - Register at [Qodana Cloud](https://qodana.cloud/) and [configure the action](https://github.com/jetbrains/qodana-action#qodana-cloud) - Use [GitHub Code Scanning with Qodana](https://github.com/jetbrains/qodana-action#github-code-scanning) - Host [Qodana report at GitHub Pages](https://github.com/JetBrains/qodana-action/blob/3a8e25f5caad8d8b01c1435f1ef7b19fe8b039a0/README.md#github-pages) - Inspect and use `qodana.sarif.json` (see [the Qodana SARIF format](https://www.jetbrains.com/help/qodana/qodana-sarif-output.html#Report+structure) for details) To get `*.log` files or any other Qodana artifacts, run the action with `upload-result` option set to `true`, so that the action will upload the files as the job artifacts: ```yaml - name: 'Qodana Scan' uses: JetBrains/qodana-action@v2024.2.3 with: upload-result: true ```

Contact Qodana team

Contact us at [qodana-support@jetbrains.com](mailto:qodana-support@jetbrains.com) - Or via our issue tracker: https://jb.gg/qodana-issue - Or share your feedback: https://jb.gg/qodana-discussions