search

patricegautier / unifiZabbix

Zabbix templates to monitor pretty much all Unifi devices
183 stars 36 forks source link

Large spikes Channel Interference for U7 Pro #113

Closed send2ali closed 7 months ago

send2ali commented 7 months ago

Im having an issues with false channel Interference readings for my recently installed U7 Pro. It jumps from 1-3% to some very high amount like 4294967172 %. This happens on all three channels on random times. I count about 9 in the last day or so. I have other AP's and switch running with no issue.

Nothing is showing up in mcaDumpShort.err or zabbix_server.log for this AP. Only thing of note is that it replaced a different AP and I used the same IP address. Had some server key errors when I first installed it but I cleared out.

U7Pro-Error2 U7Pro-Error1

Any help would be great.

Im running Ubunt 20.4.6 LTS Zabbix 6.4.13 Using the latest version of your script (from 3 weeks ago)

patricegautier commented 7 months ago

Sadly I don't have a U7 Pro I can test with.. My guess is that mca-dump on the AP itself is returning an aberrant value once in a while. I could stomp the problem and discard any value that is not between 0 and a 100 I just wonder if there's something else going on there before I do that.

patricegautier commented 7 months ago

for what it's worth, the channel utilization #s on the 6 enterprise are also very suspicious. I reported it to Unifi..

send2ali commented 7 months ago

I like your stomping idea, sounds like a fix. Not sure how long unifi will take to fix it, if at all. Im happy if you want me to do any testing on my end as well.

patricegautier commented 7 months ago

Well try this latest commit for the template set. I added range validation to a lot of items, including all the percentages..

send2ali commented 7 months ago

Thanks, I've just updated the template. Hopefully should be resolved. I'll report back in day or so.

send2ali commented 7 months ago

Reporting back. I haven't received a single alert since i updated the template. I'll close this request off. Thanks for your help in resolving this issue. Also i looked a bit further into the alerts and noticed that only two of the three channels were causing this. 6e and na had the high percentage alerts while the ng channel interference was at normal levels the whole time.