Second Camera

[dillario]

Hello,

I made 2 instances for my two printers. But I can't get the second camera to work. Can someone tell me what to enter here? Thanks.

[paukstelis]

octoprint_deploy will automatically fill that, depending on if you used haproxy for cameras.

Please provide the diagnostic output from the Utilities menu.

[dillario]

Thanks. Don't quite understand what I have to do. Can you explain it to me in more Details?

[paukstelis]

sudo octoprint_deploy/octoprint_deploy.sh Select Utilities Select Diagnostic Output Copy and paste the output here.

[dillario]

octoprint_deploy diagnostic information. Please provide ALL output for support h elp

---

/etc/octoprint_deploy

---

octoexec: /home/pi/oprint/bin/octoprint octopip: /home/pi/oprint/bin/pip haproxy: true octopi: true streamer: camera-streamer

---

/etc/octoprint_instances

---

instance:octoprint port:5000 udev:true instance:MegaS port:5001 udev:true instance:KobraMax port:5002 udev:true

---

/etc/octoprint_cameras

---

camera:cam_MegaS port:8001 udev:true camera:cam_KobraMax port:8002 udev:true

---

/etc/udev/rules.d/99-octoprint.rules

---

SUBSYSTEM=="tty", ATTRS{serial}=="0001", SYMLINK+="octo_octoprint" SUBSYSTEM=="tty", ATTRS{serial}=="0001", SYMLINK+="octo_MegaS" SUBSYSTEM=="video4linux", ATTRS{serial}=="9A42DA90", ATTR{index}=="0", SYMLINK+= "cam_MegaS" KERNELS=="1-1.1:1.0",SUBSYSTEM=="tty",SYMLINK+="octo_KobraMax" SUBSYSTEM=="video4linux", ATTRS{serial}=="69C4E050", ATTR{index}=="0", SYMLINK+= "cam_KobraMax" lrwxrwxrwx 1 root root 7 Aug 13 09:21 /dev/octo_KobraMax -> ttyUSB1 lrwxrwxrwx 1 root root 7 Aug 13 09:21 /dev/octo_MegaS -> ttyUSB0 lrwxrwxrwx 1 root root 7 Aug 13 09:21 /dev/octo_octoprint -> ttyUSB0 lrwxrwxrwx 1 root root 6 Aug 13 09:21 /dev/cam2_KobraMax -> video2 lrwxrwxrwx 1 root root 6 Aug 13 09:21 /dev/cam_KobraMax -> video2 lrwxrwxrwx 1 root root 6 Aug 13 09:21 /dev/cam_MegaS -> video0

---

● octoprint.service - The snappy web interface for your 3D printer Loaded: loaded (/etc/systemd/system/octoprint.service; enabled; vendor pres et: enabled) Active: active (running) since Sun 2023-08-13 08:59:27 BST; 4h 44min ago Main PID: 2632 (octoprint) Tasks: 14 (limit: 3135) CPU: 3min 29.772s CGroup: /system.slice/octoprint.service └─2632 /home/pi/oprint/bin/python /home/pi/oprint/bin/octoprint ser ve --host=127.0.0.1 --port=5000

Aug 13 11:14:30 octopi octoprint[2632]: 2023-08-13 11:14:30,789 - octoprint.serv er.heartbeat - INFO - Server heartbeat <3 Aug 13 11:29:30 octopi octoprint[2632]: 2023-08-13 11:29:30,790 - octoprint.serv er.heartbeat - INFO - Server heartbeat <3 Aug 13 11:44:30 octopi octoprint[2632]: 2023-08-13 11:44:30,791 - octoprint.serv er.heartbeat - INFO - Server heartbeat <3 Aug 13 11:59:30 octopi octoprint[2632]: 2023-08-13 11:59:30,792 - octoprint.serv er.heartbeat - INFO - Server heartbeat <3 Aug 13 12:14:30 octopi octoprint[2632]: 2023-08-13 12:14:30,793 - octoprint.serv er.heartbeat - INFO - Server heartbeat <3 Aug 13 12:29:30 octopi octoprint[2632]: 2023-08-13 12:29:30,795 - octoprint.serv er.heartbeat - INFO - Server heartbeat <3 Aug 13 12:44:30 octopi octoprint[2632]: 2023-08-13 12:44:30,796 - octoprint.serv er.heartbeat - INFO - Server heartbeat <3 Aug 13 12:59:30 octopi octoprint[2632]: 2023-08-13 12:59:30,797 - octoprint.serv er.heartbeat - INFO - Server heartbeat <3 Aug 13 13:14:30 octopi octoprint[2632]: 2023-08-13 13:14:30,798 - octoprint.serv er.heartbeat - INFO - Server heartbeat <3 Aug 13 13:29:30 octopi octoprint[2632]: 2023-08-13 13:29:30,800 - octoprint.serv er.heartbeat - INFO - Server heartbeat <3 None None {'bitrate': '10000k', 'cleanTmpAfterDays': 7, 'defaultWebcam': 'classic', 'ffmpeg': None, 'ffmpegCommandline': '{ffmpeg} -framerate {fps} -i "{input}" -vcodec ' '{videocodec} -threads {threads} -b:v {bitrate} -f ' '{containerformat} -y {filters} "{output}"', 'ffmpegThreads': 1, 'ffmpegThumbnailCommandline': '{ffmpeg} -sseof -1 -i "{input}" -update 1 -q:v ' '0.7 "{output}"', 'ffmpegVideoCodec': 'libx264', 'snapshotWebcam': 'classic', 'timelapse': {'fps': 25, 'options': {'capturePostRoll': None, 'interval': None, 'retractionZHop': None}, 'postRoll': 0, 'type': 'off'}, 'timelapseEnabled': True, 'watermark': True, 'webcamEnabled': True}

---

● MegaS.service - The snappy web interface for your 3D printer Loaded: loaded (/etc/systemd/system/MegaS.service; enabled; vendor preset: enabled) Active: active (running) since Sun 2023-08-13 09:14:21 BST; 4h 30min ago Main PID: 4454 (octoprint) Tasks: 20 (limit: 3135) CPU: 3min 52.079s CGroup: /system.slice/MegaS.service └─4454 /home/pi/oprint/bin/python /home/pi/oprint/bin/octoprint serve --config=/home/pi/.MegaS/config.yaml --basedir=/home/pi/.MegaS --port=5001

Aug 13 12:40:10 octopi octoprint[4454]: 2023-08-13 12:40:10,894 - octoprint.access.users - INFO - Logged in user: dillario Aug 13 12:40:10 octopi octoprint[4454]: 2023-08-13 12:40:10,935 - octoprint.server.util.flask - INFO - Passively logging in user dillario from 78.42.115.215 Aug 13 12:40:10 octopi octoprint[4454]: 2023-08-13 12:40:10,935 - octoprint.access.users - INFO - Logged in user: dillario Aug 13 12:40:10 octopi octoprint[4454]: 2023-08-13 12:40:10,972 - octoprint.server.util.flask - INFO - Passively logging in user dillario from 78.42.115.215 Aug 13 12:40:10 octopi octoprint[4454]: 2023-08-13 12:40:10,972 - octoprint.access.users - INFO - Logged in user: dillario Aug 13 12:44:24 octopi octoprint[4454]: 2023-08-13 12:44:24,818 - octoprint.server.heartbeat - INFO - Server heartbeat <3 Aug 13 12:59:24 octopi octoprint[4454]: 2023-08-13 12:59:24,819 - octoprint.server.heartbeat - INFO - Server heartbeat <3 Aug 13 13:14:24 octopi octoprint[4454]: 2023-08-13 13:14:24,820 - octoprint.server.heartbeat - INFO - Server heartbeat <3 Aug 13 13:29:24 octopi octoprint[4454]: 2023-08-13 13:29:24,821 - octoprint.server.heartbeat - INFO - Server heartbeat <3 Aug 13 13:44:24 octopi octoprint[4454]: 2023-08-13 13:44:24,823 - octoprint.server.heartbeat - INFO - Server heartbeat <3 None None {'bitrate': '10000k', 'cleanTmpAfterDays': 7, 'defaultWebcam': 'classic', 'ffmpeg': None, 'ffmpegCommandline': '{ffmpeg} -framerate {fps} -i "{input}" -vcodec ' '{videocodec} -threads {threads} -b:v {bitrate} -f ' '{containerformat} -y {filters} "{output}"', 'ffmpegThreads': 1, 'ffmpegThumbnailCommandline': '{ffmpeg} -sseof -1 -i "{input}" -update 1 -q:v ' '0.7 "{output}"', 'ffmpegVideoCodec': 'libx264', 'snapshotWebcam': 'classic', 'timelapse': {'fps': 25, 'options': {'capturePostRoll': None, 'interval': None, 'retractionZHop': None}, 'postRoll': 0, 'type': 'off'}, 'timelapseEnabled': True, 'watermark': True, 'webcamEnabled': True}

---

● KobraMax.service - The snappy web interface for your 3D printer Loaded: loaded (/etc/systemd/system/KobraMax.service; enabled; vendor preset: enabled) Active: active (running) since Sun 2023-08-13 09:18:58 BST; 4h 25min ago Main PID: 4869 (octoprint) Tasks: 20 (limit: 3135) CPU: 9min 11.368s CGroup: /system.slice/KobraMax.service └─4869 /home/pi/oprint/bin/python /home/pi/oprint/bin/octoprint serve --config=/home/pi/.KobraMax/config.yaml --basedir=/home/pi/.KobraMax --port=5002

Aug 13 12:40:19 octopi octoprint[4869]: 2023-08-13 12:40:19,099 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid Aug 13 12:49:02 octopi octoprint[4869]: 2023-08-13 12:49:02,464 - octoprint.server.heartbeat - INFO - Server heartbeat <3 Aug 13 12:57:07 octopi octoprint[4869]: 2023-08-13 12:57:07,452 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:78.42.115.215 Aug 13 13:04:02 octopi octoprint[4869]: 2023-08-13 13:04:02,465 - octoprint.server.heartbeat - INFO - Server heartbeat <3 Aug 13 13:19:02 octopi octoprint[4869]: 2023-08-13 13:19:02,466 - octoprint.server.heartbeat - INFO - Server heartbeat <3 Aug 13 13:34:02 octopi octoprint[4869]: 2023-08-13 13:34:02,467 - octoprint.server.heartbeat - INFO - Server heartbeat <3 Aug 13 13:34:56 octopi octoprint[4869]: 2023-08-13 13:34:56,750 - octoprint.util.comm - INFO - Finished in 3278.808 s. Aug 13 13:34:56 octopi octoprint[4869]: 2023-08-13 13:34:56,751 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Finishing" Aug 13 13:34:56 octopi octoprint[4869]: 2023-08-13 13:34:56,762 - octoprint.printer.standard.job - INFO - Print job done - origin: local, path: AC_xyzCalibration_cube.gcode, owner: dillario Aug 13 13:34:56 octopi octoprint[4869]: 2023-08-13 13:34:56,810 - octoprint.util.comm - INFO - Changing monitoring state from "Finishing" to "Operational" None None {'bitrate': '10000k', 'cleanTmpAfterDays': 7, 'defaultWebcam': 'classic', 'ffmpeg': None, 'ffmpegCommandline': '{ffmpeg} -framerate {fps} -i "{input}" -vcodec ' '{videocodec} -threads {threads} -b:v {bitrate} -f ' '{containerformat} -y {filters} "{output}"', 'ffmpegThreads': 1, 'ffmpegThumbnailCommandline': '{ffmpeg} -sseof -1 -i "{input}" -update 1 -q:v ' '0.7 "{output}"', 'ffmpegVideoCodec': 'libx264', 'snapshotWebcam': 'classic', 'timelapse': {'fps': 25, 'options': {'capturePostRoll': None, 'interval': None, 'retractionZHop': None}, 'postRoll': 0, 'type': 'off'}, 'timelapseEnabled': True, 'watermark': True, 'webcamEnabled': True}

---

Unit cam_MegaS.service could not be found.

---

Unit cam_KobraMax.service could not be found.

---

● haproxy.service - HAProxy Load Balancer Loaded: loaded (/lib/systemd/system/haproxy.service; enabled; vendor preset: enabled) Active: active (running) since Sun 2023-08-13 09:25:29 BST; 4h 19min ago Docs: man:haproxy(1) file:/usr/share/doc/haproxy/configuration.txt.gz Process: 5504 ExecStartPre=/usr/sbin/haproxy -f $CONFIG -c -q $EXTRAOPTS (code=exited, status=0/SUCCESS) Main PID: 5506 (haproxy) Tasks: 5 (limit: 3135) CPU: 46.690s CGroup: /system.slice/haproxy.service ├─5506 /usr/sbin/haproxy -Ws -f /etc/haproxy/haproxy.cfg -p /run/haproxy.pid -S /run/haproxy-master.sock └─5508 /usr/sbin/haproxy -Ws -f /etc/haproxy/haproxy.cfg -p /run/haproxy.pid -S /run/haproxy-master.sock

Aug 13 12:40:11 octopi haproxy[5508]: ::ffff:78.42.115.215:52464 [13/Aug/2023:12:40:11.411] public KobraMax/octoprint1 0/0/0/83/94 200 274965 - - ---- 7/7/2/2/0 0/0 "GET /KobraMax/plugin/gcodeviewer/static/js/lib/pako.js HTTP/1.1" Aug 13 12:40:11 octopi haproxy[5508]: ::ffff:78.42.115.215:52463 [13/Aug/2023:12:40:11.453] public KobraMax/octoprint1 0/0/0/64/64 200 28611 - - ---- 7/7/1/1/0 0/0 "GET /KobraMax/static/img/graph-background.png HTTP/1.1" Aug 13 12:40:18 octopi haproxy[5508]: ::ffff:78.42.115.215:52459 [13/Aug/2023:12:40:17.915] public KobraMax/octoprint1 0/0/0/131/131 204 883 - - ---- 7/7/1/1/0 0/0 "POST /KobraMax/api/job HTTP/1.1" Aug 13 12:45:41 octopi haproxy[5508]: ::ffff:192.168.178.25:44668 [13/Aug/2023:12:45:41.737] public octoprint/octoprint1 0/0/0/29/29 200 937 - - ---- 2/2/0/0/0 0/0 "GET /plugin/discovery/discovery.xml HTTP/1.1" Aug 13 12:52:04 octopi haproxy[5508]: ::ffff:51.15.252.227:40344 [13/Aug/2023:12:52:04.974] public octoprint/octoprint1 0/0/0/7/7 405 324 - - ---- 2/2/0/0/0 0/0 "CONNECT google.com:443 HTTP/1.1" Aug 13 12:57:07 octopi haproxy[5508]: ::ffff:78.42.115.215:52462 [13/Aug/2023:12:40:10.082] public KobraMax/octoprint1 0/0/0/3/1017363 101 116226 - - CD-- 1/1/0/0/0 0/0 "GET /KobraMax/sockjs/873/hcbkkwyd/websocket HTTP/1.1" Aug 13 13:05:54 octopi haproxy[5508]: ::ffff:85.72.70.3:57929 [13/Aug/2023:13:05:52.703] public octoprint/octoprint1 0/0/1/1063/1320 200 31512 - - CD-- 1/1/0/0/0 0/0 "GET / HTTP/1.0" Aug 13 13:14:44 octopi haproxy[5508]: ::ffff:192.168.178.39:45358 [13/Aug/2023:13:14:44.125] public octoprint/octoprint1 0/0/0/26/26 200 937 - - ---- 1/1/0/0/0 0/0 "GET /plugin/discovery/discovery.xml HTTP/1.1" Aug 13 13:35:26 octopi haproxy[5508]: ::ffff:192.168.178.30:36490 [13/Aug/2023:13:35:26.318] public octoprint/octoprint1 0/0/0/28/28 200 937 - - ---- 1/1/0/0/0 0/0 "GET /plugin/discovery/discovery.xml HTTP/1.1" Aug 13 13:36:21 octopi haproxy[5508]: ::ffff:192.168.178.42:42627 [13/Aug/2023:13:36:21.204] public octoprint/octoprint1 0/0/1/16/17 200 937 - - ---- 1/1/0/0/0 0/0 "GET /plugin/discovery/discovery.xml HTTP/1.1"

[paukstelis]

You are using OctoPi, so setting up cameras must be done manually, not with octoprint_deploy (unless you change the streamer to ustreamer). You can do this from the utility menu. I would remove all cameras, change to ustreamer, then go through the camera setup process again.

[dillario]

OK. Thanks. And how do I enter the link then? Can you send me an example link how to enter the link?

[paukstelis]

octoprint_deploy will do it for you

[dillario]

Thank you so much.

[dillario]

One more question. Can I change the resolution of the camera afterwards?

[paukstelis]

One more question. Can I change the resolution of the camera afterwards?

Yes. You must modify the service files (/etc/systemd/system/cam_instancename.service)