Closed xHeffer closed 2 years ago
Thanks. This has an entirely different USB/UART adapter. I will add it in and then it should work. It still doesn't have a serial number, but it should at least detect the port. I will let you know when I have the change to try out.
What printer board is this?
Following commands in the octoprint_deploy directory should let you try the new version:
git pull git checkout ch341
That's the Ender 3 max board I'm also adding the tronxy xy2 onto it which is a chitu board
If you can give me the dmesg from teh tronxy that would be useful as well.
I'll sort that tommorow once I'm available also having an anycubic mega zero in there which is a very standard board
Do I need the 99 octoprint rules file?
No, the file will get created for you.
Also camera wise I tried the camera setup and it didn't recognise it either but I'll look at that tommorow
Cameras are a lot trickier. That feature is very experimental.
octouser@octolinux:~/octoprint_deploy$ git pull From https://github.com/paukstelis/octoprint_deploy
is that normal
no, that's kind of weird, but you can do a: git stash; git pull and it should resolve things.
Done that managed to pull ok tried setup again but nothing? Same output
Did you switch branches? git checkout ch341
Can you try one of the other printers to see what happens?
I've tried all three none pickup anything ill send d msg of each one Here is anycubic
als from /var/log/journal/88020997ada14fb190115a38d7af21af. [59651.122839] usb 1-1.2: new full-speed USB device number 13 using ehci-pci [59651.232237] usb 1-1.2: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64 [59651.232240] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [59651.232242] usb 1-1.2: Product: USB Serial [59651.232672] ch341 1-1.2:1.0: ch341-uart converter detected [59651.233567] usb 1-1.2: ch341-uart converter now attached to ttyUSB0 [59667.324773] usb 1-1.2: USB disconnect, device number 13 [59667.324977] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0 [59667.325002] ch341 1-1.2:1.0: device disconnected [59674.903478] systemd-journald[261]: Received client request to rotate journal. [59675.166189] systemd-journald[261]: Vacuuming done, freed 0B of archived journals from /var/log/journal/88020997ada14fb190115a38d7af21af. [59678.510713] usb 1-1.2: new full-speed USB device number 14 using ehci-pci [59678.620083] usb 1-1.2: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64 [59678.620086] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [59678.620088] usb 1-1.2: Product: USB Serial [59678.621014] ch341 1-1.2:1.0: ch341-uart converter detected [59678.622405] usb 1-1.2: ch341-uart converter now attached to ttyUSB0
here is ender max [59678.620088] usb 1-1.2: Product: USB Serial [59678.621014] ch341 1-1.2:1.0: ch341-uart converter detected [59678.622405] usb 1-1.2: ch341-uart converter now attached to ttyUSB0 [59865.928930] ch341-uart ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 [59865.929801] ch341-uart ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 [59865.978193] usb 1-1.2: USB disconnect, device number 14 [59865.979380] usb 1-1.2: failed to send control message: -19 [59865.979507] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0 [59865.979528] ch341 1-1.2:1.0: device disconnected [59868.565986] usb 1-1.2: new full-speed USB device number 15 using ehci-pci [59868.675429] usb 1-1.2: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64 [59868.675433] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [59868.675434] usb 1-1.2: Product: USB Serial [59868.675981] ch341 1-1.2:1.0: ch341-uart converter detected [59868.676998] usb 1-1.2: ch341-uart converter now attached to ttyUSB0 octouser@octolinux:~$
here is tronxy [59868.565986] usb 1-1.2: new full-speed USB device number 15 using ehci-pci [59868.675429] usb 1-1.2: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64 [59868.675433] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [59868.675434] usb 1-1.2: Product: USB Serial [59868.675981] ch341 1-1.2:1.0: ch341-uart converter detected [59868.676998] usb 1-1.2: ch341-uart converter now attached to ttyUSB0 [59897.056250] usb 1-1.2: USB disconnect, device number 15 [59897.056534] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0 [59897.056561] ch341 1-1.2:1.0: device disconnected [59902.473878] usb 3-1: new full-speed USB device number 11 using xhci_hcd [59902.622984] usb 3-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64 [59902.622987] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [59902.622989] usb 3-1: Product: USB Serial [59902.624441] ch341 3-1:1.0: ch341-uart converter detected [59902.625175] usb 3-1: ch341-uart converter now attached to ttyUSB0
Weird. Wish I had one of those boards to test with. The common thread here is that they are all using ch341 usb-uart.
I added a script to the ch341 branch that can help diagnose without having to run through the whole process. do a git pull and then there is a usbtesting.sh file that you should run as sudo: $ sudo ./usbtesting.sh
It probably won't work at first, but I can make some modifications to the script to try and figure it out.
Email me where you are based I can send you a tronxy board I have spare? @.***
On Sat, 27 Mar 2021 at 12:31, paukstelis @.***> wrote:
Weird. Wish I had one of those boards to test with. The common thread here is that they are all using ch341 usb-uart.
I added a script to the ch341 branch that can help diagnose without having to run through the whole process. do a git pull and then there is a usbtesting.sh file that you should run as sudo: $ sudo ./usbtesting.sh
It probably won't work at first, but I can make some modifications to the script to try and figure it out.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/paukstelis/octoprint_deploy/issues/2#issuecomment-808725686, or unsubscribe https://github.com/notifications/unsubscribe-auth/ALD5FJKV7VA6KPPGTVZKB63TFXF25ANCNFSM4Z4DV2NQ .
Plug your printer in via USB now (detection time-out in 1 min) 1-1.2:1.0 1-1.2:1.0 1-1.2:1.0 1-1.2:1.0 1-1.2:1.0 1-1.2:1.0
Could it be a driver issue?
That indicates it is actually working. Those boards don't have serial numbers, but it has detected the USB port it was plugged into.
I will modify the main script slightly and you can give that a shot again. It should timeout and give you that usb port assignment.
git pull
sudo ./addnew_printer.sh
done that this is what I get after is this correct Do you want to use the physical USB port to assign the udev entry? If you use this any USB hubs and printers detected this way must stay plugged into the same USB positions on your machine as they are right now (y/n).y Your printer will be setup at the following usb address: 1-1.2:1.0
Would you like to auto detect an associated USB camera (experimental; y/n)?n Ready to write all changes. Do you want to proceed? y Created symlink /etc/systemd/system/multi-user.target.wants/avc.service → /etc/systemd/system/avc.service. only creates symlink?
No, it sets up the whole service. You should be able to access your instances at whatever port you setup.
On Sat, 27 Mar 2021 at 13:13, paukstelis @.***> wrote:
No, it sets up the whole service. You should be able to access your instances at whatever port you setup.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/paukstelis/octoprint_deploy/issues/2#issuecomment-808731089, or unsubscribe https://github.com/notifications/unsubscribe-auth/ALD5FJKA2AP544AFU34ZDJLTFXKXFANCNFSM4Z4DV2NQ .
So from here how do I start?
Don't worry got it working how may I buy you a couple coffees kind sir!
Great and thanks! Bottom of this page: https://github.com/paukstelis/Octoprint-Cancelobject
Perfect :)
On Sat, 27 Mar 2021 at 14:27, paukstelis @.***> wrote:
Great and thanks! Bottom of this page: https://github.com/paukstelis/Octoprint-Cancelobject
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/paukstelis/octoprint_deploy/issues/2#issuecomment-808741406, or unsubscribe https://github.com/notifications/unsubscribe-auth/ALD5FJMM663LYK2VLMXNU33TFXTNRANCNFSM4Z4DV2NQ .
@paukstelis after adding all the non serial printers im trying to add another printer (4th printer) which is a btt skr 1.4 any clue on why its picking upp commands from another printer@?
Contents of /etc/udev/rules.d/99-octoprint.rules would be useful. See if there duplicates for some reason.
Along those same lines, a $ ls -la /dev/octo_* would see if you have two symlinks going to the same thing.
[ 1008.332589] usb 1-1.4: USB disconnect, device number 14 [ 1027.262845] systemd-journald[115]: Received request to rotate journal from PID 1 [ 1027.277133] systemd-journald[115]: Vacuuming done, freed 0B of archived journals from /run/log/journal/895a3f8310d74f8d95121cf8f2647016. [ 1036.794313] usb 1-1.4: new full-speed USB device number 15 using dwc_otg [ 1036.928937] usb 1-1.4: New USB device found, idVendor=1eaf, idProduct=0029, bcdDevice= 2.00 [ 1036.928956] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1036.928970] usb 1-1.4: Product: Maple [ 1036.928983] usb 1-1.4: Manufacturer: LeafLabs [ 1036.930193] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
So I'm trying to hook up a CR6-SE with a BTT CR6 board, and this is the dmesg I get. Also won't detect an Ender 3v2 with the CH341 chipset. Cameras get detected just fine.
here is my dmesg
[ 2860.622875] usb 3-1: USB disconnect, device number 7 [ 2860.623154] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0 [ 2860.623179] ch341 3-1:1.0: device disconnected [ 2891.268746] usb 3-1: new full-speed USB device number 8 using xhci_hcd [ 2891.417833] usb 3-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64 [ 2891.417836] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2891.417837] usb 3-1: Product: USB Serial [ 2891.418576] ch341 3-1:1.0: ch341-uart converter detected [ 2891.419007] usb 3-1: ch341-uart converter now attached to ttyUSB0 [ 2893.288389] systemd-journald[261]: Received client request to rotate journal. [ 2893.449946] systemd-journald[261]: Vacuuming done, freed 0B of archived journals from /var/log/journal/88020997ada14fb190115a38d7af21af. [ 3026.738385] usb 3-1: USB disconnect, device number 8 [ 3026.738663] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0 [ 3026.738689] ch341 3-1:1.0: device disconnected [ 3029.191948] usb 3-1: new full-speed USB device number 9 using xhci_hcd [ 3029.341104] usb 3-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64 [ 3029.341107] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3029.341109] usb 3-1: Product: USB Serial [ 3029.341867] ch341 3-1:1.0: ch341-uart converter detected [ 3029.342227] usb 3-1: ch341-uart converter now attached to ttyUSB0 [ 5921.604857] usb 3-1: USB disconnect, device number 9 [ 5921.605691] usb 3-1: failed to send control message: -19 [ 5921.606329] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0 [ 5921.606347] ch341 3-1:1.0: device disconnected [ 5952.396723] usb 3-1: new full-speed USB device number 10 using xhci_hcd [ 5952.545829] usb 3-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64 [ 5952.545833] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 5952.545835] usb 3-1: Product: USB Serial [ 5952.547327] ch341 3-1:1.0: ch341-uart converter detected [ 5952.548053] usb 3-1: ch341-uart converter now attached to ttyUSB0