Pause and remember tried pin and contimuos after

[GoogleCodeExporter]

thank your organization has developed a very interesting part. I have used it 
to try an AP with WPS enabled. However, the expected completion time is very 
long, from 4 to 8 hours, I usually have to start Backtrack after a system 
failure or when the computer loses power. How do I backup the current status of 
the Reaver, and continue after replacing the battery without having to start 
the search from the beginning PIN_WPS? Sorry for the ability to write my 
english, I used Google to translate

Original issue reported on code.google.com by thinhphc...@gmail.com on 13 Sep 2013 at 10:07

[GoogleCodeExporter]

if the S.O is installed on the hd, then status of Reaver is saved. just rerun.
if you know % crash then edit first line in the files in 
/usr/local/etc/reaver/<mac>.wpc , change for number % ( ex. 20% = 2000) and 
rerun reaver again

Original comment by deltomaf...@gmail.com on 14 Sep 2013 at 2:48

[GoogleCodeExporter]

thank you very much.
I have 4 wifi card, May I open 4 terminal and run reaver at time to shorten
detection time PIN code?

*Best regards!*

*Nguyễn Văn Thịnh*
DĐ: 090.7986361
Phòng Hành Chánh Nhân Sự
Công Ty Cổ Phần Khoáng Sản Phú Yên
01 Nguyễn Thị Minh Khai, Phường 7, Tp. Tuy Hòa, Phú Yên.
ĐT: 0573.842 406 - Fax: 0573. 842 311

Original comment by thinhphc...@gmail.com on 16 Sep 2013 at 12:02

[GoogleCodeExporter]

not see problem opening a terminal for each wifi
should work!
now open with 1 WiFi card and also worked slow, this also work, since the 
channel is the same.

Original comment by deltomaf...@gmail.com on 16 Sep 2013 at 10:30

[GoogleCodeExporter]

SLOW?
did you mean ? that was Victim AP will respond slowly, so much more as well
as original WIFI card when 1 Wifi only right

I have a plan: I'm 8-digit PIN code division into sections (eg section 4. I
change the percentage of the file that was saved reaver). then detects a
wifi card PIN on a piece. With my 4 wifi card will shorten the time to
detection PIN quarter than normal. And if I have a network of about 100
Wifi card, I can find the PIN within 6 minutes.
What do you think of my plan?

*Best regards!*

*Nguyễn Văn Thịnh*
DĐ: 090.7986361
Phòng Hành Chánh Nhân Sự
Công Ty Cổ Phần Khoáng Sản Phú Yên
01 Nguyễn Thị Minh Khai, Phường 7, Tp. Tuy Hòa, Phú Yên.
ĐT: 0573.842 406 - Fax: 0573. 842 311

Original comment by thinhphc...@gmail.com on 17 Sep 2013 at 12:27

[GoogleCodeExporter]

slow in my case of a card for two victims.
his plan only testing, I can not tell if the AP will answer such requests at 
the same time.
will use the option -s of Reaver sure?

Original comment by deltomaf...@gmail.com on 18 Sep 2013 at 12:54

[GoogleCodeExporter]

I see.
I will try option -s in command with Reaver.
I try embed Reaver onto raspberry PI model B, but it seem proplem with
airmon-ng on arm processor. when i finish fix this proplem,  i will report
with you.

Thankyou

*Best regards!*

*Nguyễn Văn Thịnh*
DĐ: 090.7986361
Phòng Hành Chánh Nhân Sự
Công Ty Cổ Phần Khoáng Sản Phú Yên
01 Nguyễn Thị Minh Khai, Phường 7, Tp. Tuy Hòa, Phú Yên.
ĐT: 0573.842 406 - Fax: 0573. 842 311

Original comment by thinhphc...@gmail.com on 18 Sep 2013 at 1:09