Closed DK8FT closed 8 years ago
Hello Werner,
The SD card contains two partitions. Only the first one (with 4 files) is visible under Windows.
I suggest the following next steps:
Best regards,
Pavel
Hello Pavel,
thank you for your quick answer.
It is working now ! You wrote an exciting software !
I've made a donation a couple of minutes ago.
Best regards
Werner
2016-07-12 19:15 GMT+02:00 Pavel Demin notifications@github.com:
Hello Werner,
The SD card contains two partitions. Only the first one (with 4 files) is visible under Windows.
I suggest the following next steps:
- boot Red Pitaya with the WSPR SD card
- connect to Red Pitaya using WinSCP http://winscp.net
- open decode-wspr.sh in an editor like Notepad++ http://notepad-plus-plus.org/
- set the CALL and GRID variables
- close the editor and WinSCP
- check for reported WSPR spots via WSPRnet http://wsprnet.org
Best regards,
Pavel
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/pavel-demin/red-pitaya-notes/issues/312#issuecomment-232114439, or mute the thread https://github.com/notifications/unsubscribe/ATeh5OpfZS1zHxNKzRu4vrR8STtbhI2Yks5qU8u4gaJpZM4JKjSz .
Many thanks for your feedback and for your donation! I'm glad that the WSPR receiver is working for you.
when doing so only 4 files appear on sd card
boot.bin 1,59MB devicetree.dtb 11,8kB uEnv.txt 319 bytes uImage 4,67 MB
total 4gb sd card is said to be only 11,5MB big
how to proceed, please ?
thanks and regards
Werner DK8FT