Open taminelli opened 1 week ago
I had the same yesterday, after power off/on of klf200 this was solved. Actually I have not spend time to find the door cause.
Ok but you will check that? By the way this velux integration has same problem https://github.com/home-assistant/core/tree/dev/homeassistant/components/velux but since
To be honest, the KLF200 does not like disconnections, like HA reboots. It is not very well designed for this point. However velux do not provide any updates for this device. Pyvlx and this integration has already implemented a lot of stuff to avoid such problems, but we cannot avoid them completely. So no, at the moment I've not planned to put further efforts to improve this further. If you want a solution, I recommend you put a remote plug to power off on the KLF200 remotely if this issue happens more often. Of course, if you have any specific idea, how to improve this on pyvlx or HA side, I'm welcome for ideas or PRs.
I can live with that. But the problem at the moment is that the addon doesn't work. I can not connect.
So a restart of klf200 does not help? Which version of this custom you are using?
[]()
Yes, I use that version. At the moment the KLF is blinking permanently.
Also after you switch it off and on?
Gesendet von Outlook für Androidhttps://aka.ms/AAb9ysg
From: taminelli @.> Sent: Saturday, July 6, 2024 12:05:57 PM To: pawlizio/my_velux @.> Cc: Paul Daumlechner @.>; Comment @.> Subject: Re: [pawlizio/my_velux] Can not connect to my KLF200 (Issue #50)
Yes, I use that version. At the moment the KLF is blinking permanently.
— Reply to this email directly, view it on GitHubhttps://github.com/pawlizio/my_velux/issues/50#issuecomment-2211726822, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADS6GHX4C3XVKFRHPRI7QBDZK66QLAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG4ZDMOBSGI. You are receiving this because you commented.Message ID: @.***>
Ja genau :)
Paul Daumlechner @.***> hat am 06.07.2024 12:17 CEST geschrieben:
Also after you switch it off and on?
Gesendet von Outlook für Androidhttps://aka.ms/AAb9ysg
From: taminelli @.> Sent: Saturday, July 6, 2024 12:05:57 PM To: pawlizio/my_velux @.> Cc: Paul Daumlechner @.>; Comment @.> Subject: Re: [pawlizio/my_velux] Can not connect to my KLF200 (Issue #50)
Yes, I use that version. At the moment the KLF is blinking permanently.
— Reply to this email directly, view it on GitHubhttps://github.com/pawlizio/my_velux/issues/50#issuecomment-2211726822, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADS6GHX4C3XVKFRHPRI7QBDZK66QLAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG4ZDMOBSGI. You are receiving this because you commented.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/pawlizio/my_velux/issues/50#issuecomment-2211729477, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3P4Z4ZQ5YWEN4B7GY4FWITZK67Z7AVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG4ZDSNBXG4. You are receiving this because you authored the thread.Message ID: @.***>
HA auch schon neugestartet? Ich bin auch auf dem letzten HA Stand 2024.7.1 und hab bisher keine Probleme.
Gesendet von Outlook für Androidhttps://aka.ms/AAb9ysg
From: taminelli @.> Sent: Saturday, July 6, 2024 12:58:18 PM To: pawlizio/my_velux @.> Cc: Paul Daumlechner @.>; Comment @.> Subject: Re: [pawlizio/my_velux] Can not connect to my KLF200 (Issue #50)
Ja genau :)
Paul Daumlechner @.***> hat am 06.07.2024 12:17 CEST geschrieben:
Also after you switch it off and on?
Gesendet von Outlook für Androidhttps://aka.ms/AAb9ysg
From: taminelli @.> Sent: Saturday, July 6, 2024 12:05:57 PM To: pawlizio/my_velux @.> Cc: Paul Daumlechner @.>; Comment @.> Subject: Re: [pawlizio/my_velux] Can not connect to my KLF200 (Issue #50)
Yes, I use that version. At the moment the KLF is blinking permanently.
— Reply to this email directly, view it on GitHubhttps://github.com/pawlizio/my_velux/issues/50#issuecomment-2211726822, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADS6GHX4C3XVKFRHPRI7QBDZK66QLAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG4ZDMOBSGI. You are receiving this because you commented.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/pawlizio/my_velux/issues/50#issuecomment-2211729477, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3P4Z4ZQ5YWEN4B7GY4FWITZK67Z7AVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG4ZDSNBXG4. You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHubhttps://github.com/pawlizio/my_velux/issues/50#issuecomment-2211737658, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADS6GHXNCJT673AXOTBDOOTZK7EUVAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG4ZTONRVHA. You are receiving this because you commented.Message ID: @.***>
ja, ich hatte früher die andere integration und plötzlich hat es nicht mehr funktioniert. Haben viele andere auch reklamiert. Dan habe ich alles gelöscht und deine Integration installiert und da kann ich es nicht mal mehr hinzufügen.
Paul Daumlechner @.***> hat am 06.07.2024 13:19 CEST geschrieben:
HA auch schon neugestartet? Ich bin auch auf dem letzten HA Stand 2024.7.1 und hab bisher keine Probleme.
Gesendet von Outlook für Androidhttps://aka.ms/AAb9ysg
From: taminelli @.> Sent: Saturday, July 6, 2024 12:58:18 PM To: pawlizio/my_velux @.> Cc: Paul Daumlechner @.>; Comment @.> Subject: Re: [pawlizio/my_velux] Can not connect to my KLF200 (Issue #50)
Ja genau :)
Paul Daumlechner @.***> hat am 06.07.2024 12:17 CEST geschrieben:
Also after you switch it off and on?
Gesendet von Outlook für Androidhttps://aka.ms/AAb9ysg
From: taminelli @.> Sent: Saturday, July 6, 2024 12:05:57 PM To: pawlizio/my_velux @.> Cc: Paul Daumlechner @.>; Comment @.> Subject: Re: [pawlizio/my_velux] Can not connect to my KLF200 (Issue #50)
Yes, I use that version. At the moment the KLF is blinking permanently.
— Reply to this email directly, view it on GitHubhttps://github.com/pawlizio/my_velux/issues/50#issuecomment-2211726822, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADS6GHX4C3XVKFRHPRI7QBDZK66QLAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG4ZDMOBSGI. You are receiving this because you commented.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/pawlizio/my_velux/issues/50#issuecomment-2211729477, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3P4Z4ZQ5YWEN4B7GY4FWITZK67Z7AVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG4ZDSNBXG4. You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHubhttps://github.com/pawlizio/my_velux/issues/50#issuecomment-2211737658, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADS6GHXNCJT673AXOTBDOOTZK7EUVAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG4ZTONRVHA. You are receiving this because you commented.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/pawlizio/my_velux/issues/50#issuecomment-2211742024, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3P4Z43XRAZKQNE2EFFTS4TZK7HEFAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG42DEMBSGQ. You are receiving this because you authored the thread.Message ID: @.***>
Interessant finde ich auch, wenn ich deine Installiere, kommt das Icon dahinter:
Danach gehe ich auf das Fragezeichen
Dann komme ich auf diese Seite.
Velux - Home Assistant (home-assistant.io) https://www.home-assistant.io/integrations/velux
Freundliche Grüsse
Timo Taminelli
Taminelli PC-Support Rebgasse 47 CH-4432 Lampenberg +41 79 726 59 89 www.taminelli.com https://www.taminelli.com/ @. @.
Paul Daumlechner @.***> hat am 06.07.2024 13:19 CEST geschrieben:
HA auch schon neugestartet? Ich bin auch auf dem letzten HA Stand 2024.7.1 und hab bisher keine Probleme.
Gesendet von Outlook für Androidhttps://aka.ms/AAb9ysg
From: taminelli @.> Sent: Saturday, July 6, 2024 12:58:18 PM To: pawlizio/my_velux @.> Cc: Paul Daumlechner @.>; Comment @.> Subject: Re: [pawlizio/my_velux] Can not connect to my KLF200 (Issue #50)
Ja genau :)
Paul Daumlechner @.***> hat am 06.07.2024 12:17 CEST geschrieben:
Also after you switch it off and on?
Gesendet von Outlook für Androidhttps://aka.ms/AAb9ysg
From: taminelli @.> Sent: Saturday, July 6, 2024 12:05:57 PM To: pawlizio/my_velux @.> Cc: Paul Daumlechner @.>; Comment @.> Subject: Re: [pawlizio/my_velux] Can not connect to my KLF200 (Issue #50)
Yes, I use that version. At the moment the KLF is blinking permanently.
— Reply to this email directly, view it on GitHubhttps://github.com/pawlizio/my_velux/issues/50#issuecomment-2211726822, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADS6GHX4C3XVKFRHPRI7QBDZK66QLAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG4ZDMOBSGI. You are receiving this because you commented.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/pawlizio/my_velux/issues/50#issuecomment-2211729477, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3P4Z4ZQ5YWEN4B7GY4FWITZK67Z7AVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG4ZDSNBXG4. You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHubhttps://github.com/pawlizio/my_velux/issues/50#issuecomment-2211737658, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADS6GHXNCJT673AXOTBDOOTZK7EUVAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG4ZTONRVHA. You are receiving this because you commented.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/pawlizio/my_velux/issues/50#issuecomment-2211742024, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3P4Z43XRAZKQNE2EFFTS4TZK7HEFAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG42DEMBSGQ. You are receiving this because you authored the thread.Message ID: @.***>
Guten Abend, hast du noch eine Idee?
Paul Daumlechner @.***> hat am 06.07.2024 13:19 CEST geschrieben:
HA auch schon neugestartet? Ich bin auch auf dem letzten HA Stand 2024.7.1 und hab bisher keine Probleme.
Gesendet von Outlook für Androidhttps://aka.ms/AAb9ysg
From: taminelli @.> Sent: Saturday, July 6, 2024 12:58:18 PM To: pawlizio/my_velux @.> Cc: Paul Daumlechner @.>; Comment @.> Subject: Re: [pawlizio/my_velux] Can not connect to my KLF200 (Issue #50)
Ja genau :)
Paul Daumlechner @.***> hat am 06.07.2024 12:17 CEST geschrieben:
Also after you switch it off and on?
Gesendet von Outlook für Androidhttps://aka.ms/AAb9ysg
From: taminelli @.> Sent: Saturday, July 6, 2024 12:05:57 PM To: pawlizio/my_velux @.> Cc: Paul Daumlechner @.>; Comment @.> Subject: Re: [pawlizio/my_velux] Can not connect to my KLF200 (Issue #50)
Yes, I use that version. At the moment the KLF is blinking permanently.
— Reply to this email directly, view it on GitHubhttps://github.com/pawlizio/my_velux/issues/50#issuecomment-2211726822, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADS6GHX4C3XVKFRHPRI7QBDZK66QLAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG4ZDMOBSGI. You are receiving this because you commented.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/pawlizio/my_velux/issues/50#issuecomment-2211729477, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3P4Z4ZQ5YWEN4B7GY4FWITZK67Z7AVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG4ZDSNBXG4. You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHubhttps://github.com/pawlizio/my_velux/issues/50#issuecomment-2211737658, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADS6GHXNCJT673AXOTBDOOTZK7EUVAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG4ZTONRVHA. You are receiving this because you commented.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/pawlizio/my_velux/issues/50#issuecomment-2211742024, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3P4Z43XRAZKQNE2EFFTS4TZK7HEFAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJRG42DEMBSGQ. You are receiving this because you authored the thread.Message ID: @.***>
Um das im Detail zu untersuchen bräuchte ich die Logfiles für pyvlx, eventuell lässt sich damit das Problem erkennen.
Ok habe das im config yaml hinzugefügt. Wo finde ich nachher die Logs ?
Paul Daumlechner @.***> hat am 07.07.2024 23:57 CEST geschrieben:
Um das im Detail zu untersuchen bräuchte ich die Logfiles für pyvlx, eventuell lässt sich damit das Problem erkennen.
— Reply to this email directly, view it on GitHub https://github.com/pawlizio/my_velux/issues/50#issuecomment-2212588682, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3P4Z4Y7R5UPM6QUCHUPD2LZLG2THAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJSGU4DQNRYGI. You are receiving this because you authored the thread.Message ID: @.***>
I'm selben Verzeichnis wie die config yaml unter home-assistant.log
Logger: pyvlx Quelle: runner.py:190 Erstmals aufgetreten: 00:06:08 (1 Vorkommnisse) Zuletzt protokolliert: 00:06:08
Failed to authenticate with password "Qp****"
Sieht nach Passwort falsch aus? Kann ich mir aber nicht vorstellen, da ich das Passwort seit Jahren im Passwort Safe aufbewahre.
Paul Daumlechner @.***> hat am 07.07.2024 23:57 CEST geschrieben:
Um das im Detail zu untersuchen bräuchte ich die Logfiles für pyvlx, eventuell lässt sich damit das Problem erkennen.
— Reply to this email directly, view it on GitHub https://github.com/pawlizio/my_velux/issues/50#issuecomment-2212588682, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3P4Z4Y7R5UPM6QUCHUPD2LZLG2THAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJSGU4DQNRYGI. You are receiving this because you authored the thread.Message ID: @.***>
Ist das das original passwort oder ein selbst gesetzes? Kann es passiert sein das das KLF200 auf Werkseinstellungen zurückgesetzt wurde?
selbst gesetztes. Habe nun den KLF auf Werks Einstellungen gesetzt und mit velux123 versucht. Selbes problem.
Paul Daumlechner @.***> hat am 08.07.2024 00:14 CEST geschrieben:
Ist das das original passwort oder ein selbst gesetzes? Kann es passiert sein das das KLF200 auf Werkseinstellungen zurückgesetzt wurde?
— Reply to this email directly, view it on GitHub https://github.com/pawlizio/my_velux/issues/50#issuecomment-2212593717, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3P4Z45AA7DRX7SRYLUDXNDZLG4S7AVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJSGU4TGNZRG4. You are receiving this because you authored the thread.Message ID: @.***>
jetzt hat es geklappt mit dem wlan passwort.
Erhalte nun folgende Meldung nach dem hinzufügen:
Logger: homeassistant.config_entries Quelle: config_entries.py:586 Erstmals aufgetreten: 01:20:50 (2 Vorkommnisse) Zuletzt protokolliert: 01:21:14
Error setting up entry 192.168.47.222 for veluxTraceback (most recent call last): File "/usr/src/homeassistant/homeassistant/config_entries.py", line 586, in async_setup result = await component.async_setup_entry(hass, self) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/config/custom_components/velux/init.py", line 58, in async_setup_entry await pyvlx.connect() File "/usr/local/lib/python3.12/site-packages/pyvlx/pyvlx.py", line 69, in connect await self.klf200.house_status_monitor_disable(pyvlx=self) File "/usr/local/lib/python3.12/site-packages/pyvlx/klf200gateway.py", line 156, in house_status_monitor_disable raise PyVLXException("Unable disable house status monitor.") pyvlx.exception.PyVLXException:
Freundliche Grüsse
Timo Taminelli
Taminelli PC-Support Rebgasse 47 CH-4432 Lampenberg +41 79 726 59 89 www.taminelli.com https://www.taminelli.com/ @. @.
Paul Daumlechner @.***> hat am 08.07.2024 00:14 CEST geschrieben:
Ist das das original passwort oder ein selbst gesetzes? Kann es passiert sein das das KLF200 auf Werkseinstellungen zurückgesetzt wurde?
— Reply to this email directly, view it on GitHub https://github.com/pawlizio/my_velux/issues/50#issuecomment-2212593717, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3P4Z45AA7DRX7SRYLUDXNDZLG4S7AVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJSGU4TGNZRG4. You are receiving this because you authored the thread.Message ID: @.***>
Velux123 klingt nach dem WLAN Passwort, das andere sollte es sein, mit dem man sich auch anschließend auf der Website des KLf200 anmelden kann.
Guten Morgen
Genau, es hat dann mit dem anderen doch noch geklappt. Bekomme aber die Meldung:
Logger: homeassistant.config_entries Quelle: config_entries.py:586 Erstmals aufgetreten: 01:20:50 (2 Vorkommnisse) Zuletzt protokolliert: 01:21:14
Error setting up entry 192.168.47.222 for veluxTraceback (most recent call last): File "/usr/src/homeassistant/homeassistant/config_entries.py", line 586, in async_setup result = await component.async_setup_entry(hass, self) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/config/custom_components/velux/init.py", line 58, in async_setup_entry await pyvlx.connect() File "/usr/local/lib/python3.12/site-packages/pyvlx/pyvlx.py", line 69, in connect await self.klf200.house_status_monitor_disable(pyvlx=self) File "/usr/local/lib/python3.12/site-packages/pyvlx/klf200gateway.py", line 156, in house_status_monitor_disable raise PyVLXException("Unable disable house status monitor.") pyvlx.exception.PyVLXException:
Worin liegt eigentlich der unterschied von deiner Applikation zu der offiziellen?
Gestern wollte ich die Fernebdienung noch einbinden aber wenn ich auf der Fernbedienung auf das Zahnrad drücke und im KLF suche, findet er nichts. Hast du ne Ahnung an was das liegen könnte? Durch den Reset sind natürlich die Daten weg. Sprich es muss gehen. Ging vorher auch :)
Paul Daumlechner @.***> hat am 08.07.2024 07:25 CEST geschrieben:
Velux123 klingt nach dem WLAN Passwort, das andere sollte es sein, mit dem man sich auch anschließend auf der Website des KLf200 anmelden kann.
— Reply to this email directly, view it on GitHub https://github.com/pawlizio/my_velux/issues/50#issuecomment-2213055658, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3P4Z47HGXL34CJX3BQCMWDZLIPF5AVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJTGA2TKNRVHA. You are receiving this because you authored the thread.Message ID: @.***>
Es kann sein das der House Status Monitor bereits deaktiviert war und dann deshalb diese Meldung kommt. Naja mit dieser habe ich Funktionen eingearbeitet, die mir ursprünglich bei der offiziellen fehlten und ich war hier flexibler. Ich versuche zwar die zusätzlichen Features auch in die offizielle zu migrieren, das dauert aber immer, bis alle Reviews durch sind und diese dann gemerged werden.
Oke danke für deinen Support :)
Hast du mir noch einen Tipp für das verbinden bzw. einbinden der Fernbedienungen? Das geht irgend wie nicht
Paul Daumlechner @.***> hat am 08.07.2024 09:36 CEST geschrieben:
Es kann sein das der House Status Monitor bereits deaktiviert war und dann deshalb diese Meldung kommt. Naja mit dieser habe ich Funktionen eingearbeitet, die mir ursprünglich bei der offiziellen fehlten und ich war hier flexibler. Ich versuche zwar die zusätzlichen Features auch in die offizielle zu migrieren, das dauert aber immer, bis alle Reviews durch sind und diese dann gemerged werden.
— Reply to this email directly, view it on GitHub https://github.com/pawlizio/my_velux/issues/50#issuecomment-2213251004, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3P4Z42SKSMO6CAYFLJ5FEDZLI6QZAVCNFSM6AAAAABKN6CBAWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJTGI2TCMBQGQ. You are receiving this because you authored the thread.Message ID: @.***>
Hallo zusammen
Ich bin komplett neu in HomeAssistant und schaffe es leider nicht, mich gegen die KLF200 zu verbinden. Die originale hat funktioniert, allerdings hatte ich dort die wohl Bekannten Verbindungsprobleme.
Nach der Eingabe des richtigen Passwortes, kommt die Fehlermeldung, dass das Passwort falsch ist.
Hier der entsprechende Auszug aus dem logfile:
2024-07-14 21:44:13.239 DEBUG (MainThread) [pyvlx] Heartbeat init
2024-07-14 21:44:13.240 DEBUG (MainThread) [pyvlx] Loadig pyvlx v0.2.23
2024-07-14 21:44:13.240 DEBUG (MainThread) [pyvlx] Connecting to KLF 200
2024-07-14 21:44:13.271 DEBUG (MainThread) [pyvlx] Connecting to KLF 200 was closed
2024-07-14 21:44:17.607 DEBUG (MainThread) [pyvlx] Amount of connections since last HA start: 1
2024-07-14 21:44:17.608 DEBUG (MainThread) [pyvlx] SEND:
Was kann ich noch tun? Vielen Dank für die Unterstützung
Du musst das WLAN Kennwort verwenden und nicht das Kennwort welches du benötigst für auf das Webinterface. So hat es bei mit funktioniert. Ich habe im Moment das Problem dass ich meine Fernbedienung nicht verbinden kann mit dem KLF. Eventuell hast du mir da einen Tipp :)
Welche Version von my_velux wurde verwendet? Bitte die 2.9.13 nehmen, die habe ich gerade aus der Beta in ein finales Release gehoben. Password ist nicht velux123, sondern das andere was auf der Rückseite des KLF200 steht.
Wie lerne ich nachher die Produkte an? Nehme an ich muss auf Interface Mode schalten und danach über die Fernbedienung?
Welche Version von my_velux wurde verwendet? Bitte die 2.9.13 nehmen, die habe ich gerade aus der Beta in ein finales Release gehoben. Password ist nicht velux123, sondern das andere was auf der Rückseite des KLF200 steht.
Super, vielen Dank. Mit der neuen Version hat's geklappt. Vielen lieben Dank, super Support
Welche Version von my_velux wurde verwendet? Bitte die 2.9.13 nehmen, die habe ich gerade aus der Beta in ein finales Release gehoben. Password ist nicht velux123, sondern das andere was auf der Rückseite des KLF200 steht.
Super, vielen Dank. Mit der neuen Version hat's geklappt. Vielen lieben Dank, super Support
Wie hast du dann die Velux Produkte eingebunden? Das geht bei mir irgend wie nicht mehr.
Ich habe erst alle Geräte über das Webinterface des KLF200 eingebunden, danach sollte die Integration neu geladen werden und alle auf dem KLF200 konfigurierten Geräte und Scenen werden zu HA übertragen.
Ich habe erst alle Geräte über das Webinterface des KLF200 eingebunden, danach sollte die Integration neu geladen werden und alle auf dem KLF200 konfigurierten Geräte und Scenen werden zu HA übertragen.
Genau so hat es bei mir dann auch geklappt. Nachdem die Integration konfiguriert war und die Anmeldung geklappt hat, habe ich HA neu gestartet und dann waren die Entitäten (2 x Rollade und 2x Fenster) verfügbar.
Ich habe erst alle Geräte über das Webinterface des KLF200 eingebunden, danach sollte die Integration neu geladen werden und alle auf dem KLF200 konfigurierten Geräte und Scenen werden zu HA übertragen.
Genau so hat es bei mir dann auch geklappt. Nachdem die Integration konfiguriert war und die Anmeldung geklappt hat, habe ich HA neu gestartet und dann waren die Entitäten (2 x Rollade und 2x Fenster) verfügbar.
Ich weis was es ist. Ich habe zu Hause nur 1-Weg Fernbedienung. Wenn ich das KLF anlerne ist das eine 2-Weg mit Intelligent. Da ich das KLF zurück gesetzt habe, hat das KLF den Schlüssel nicht mehr. Der Schlüssel bekomme ich nicht mehr, da ich keine zweite Intelligente Fernbedienung habe. Somit muss ich die Storen zurück setzen und neu anlernen.
With the newest HA Version I can not connect du my KLF.