Closed BlackMagic closed 10 years ago
I just tested Centos-7.0-1406-x86_64-Minimal.iso on 3 different machines and I found no issues.
Either your USB has an issue or there is something on your target computer that syslinux doesn't like. What happens if you try a different USB drive or boot a different computer?
Thanks for getting back to me.
I flushed the USB a few times, removing everything from it, before transferring the Centos7 image. The target machine is a notebook with Centos 6.? installed on the hard drive.
I'll try again over the weekend and let you know the outcome. I have a couple of different laptop machines I can test with.
Regards,
MJR
Hi Pete,
Your diagnosis was correct. The problem was caused by a faulty USB drive.
When I did a scan on the USB rufus found 256 bad blocks, but when I elected to create an iso image on the USB rufus ignored the bad blocks and copied the iso information to the USB, after doing a slow format. Shouldn't the slow format have picked up the bad blocks?
My statement that rawrite works was correct, except that I was using a different USB drive when I used rawrite.
Thanks for your assistance. I've learned to scan USBs before using them to created bootable images.
MJR
Scanning image...
Disc image is an ISO9660 image
libcdio: from_733: broken byte order
libcdio: from_733: broken byte order
libcdio: from_733: broken byte order
libcdio: from_733: broken byte order
libcdio: from_733: broken byte order
libcdio: from_733: broken byte order
libcdio: from_733: broken byte order
libcdio: from_733: broken byte order
Will use /isolinux/isolinux.cfg for Syslinux
Detected Isolinux version: 4.05/2011-12-09 (from '/isolinux/isolinux.bin')
ISO label: 'CentOS 7 x86_64'
Size: 664238080 bytes
Has a >64 chars filename: Yes
Has Symlinks: No
Has a >4GB file: No
Uses ReactOS: No
Uses KolibriOS: No
Uses EFI: Yes
Uses Bootmgr: No
Uses WinPE: No
Uses isolinux: Yes (4.05)
With an old menu.c32: No
With an old vesamenu.c32: No
Using ISO: CentOS-7.0-1406-x86_64-Minimal.iso
Format operation started
Requesting disk access...
Opened drive \\.\PHYSICALDRIVE1 for write access
Will use 'E:' as volume mountpoint
I/O boundary checks disabled
Analyzing existing boot records...
Drive has a Windows 7 Master Boot Record
Volume has an unknown Partition Boot Record
Deleting partitions...
Clearing MBR/PBR/GPT structures...
Erasing 128 sectors
Partitioning (MBR)...
Closing existing volume...
Waiting for logical drive to reappear...
Formatting (FAT32)...
Using cluster size: 4096 bytes
Slow format was selected
Creating file system: Task 1/5 completed
Creating file system: Task 2/5 completed
Creating file system: Task 3/5 completed
Creating file system: Task 4/5 completed
Creating file system: Task 5/5 completed
Format completed.
Writing master boot record...
Drive has a Zeroed Master Boot Record
Set bootable USB partition as 0x80
Using Syslinux MBR
Found volume GUID \\?\Volume{e5ad9d88-4608-11e4-9b15-b870f47f8498}\
Installing Syslinux 4.05...
Successfully wrote 'ldlinux.sys'
Opened drive \\?\Volume{e5ad9d88-4608-11e4-9b15-b870f47f8498} for write access
Successfully wrote Syslinux boot record
Successfully remounted Volume{e5ad9d88-4608-11e4-9b15-b870f47f8498}\ on E:\
Copying ISO files...
Extracting files...
Disc image is an ISO9660 image
This image will be extracted using Rock Ridge extensions (if present)
Extracting: E:\CentOS_BuildTag (14 bytes)
Extracting: E:\EFI\BOOT\BOOTX64.efi (1.3 MB)
Extracting: E:\EFI\BOOT\fonts\TRANS.TBL (223 bytes)
Extracting: E:\EFI\BOOT\fonts\unicode.pf2 (2.4 MB)
Extracting: E:\EFI\BOOT\grub.cfg (1.3 KB)
Extracting: E:\EFI\BOOT\grubx64.efi (932.4 KB)
Extracting: E:\EFI\BOOT\MokManager.efi (1.2 MB)
Extracting: E:\EFI\BOOT\TRANS.TBL (1.1 KB)
Extracting: E:\EFI\TRANS.TBL (216 bytes)
Extracting: E:\EULA (214 bytes)
Extracting: E:\GPL (17.6 KB)
Extracting: E:\images\efiboot.img (6.1 MB)
Extracting: E:\images\pxeboot\initrd.img (33.3 MB)
Extracting: E:\images\pxeboot\TRANS.TBL (664 bytes)
Extracting: E:\images\pxeboot\upgrade.img (31.6 MB)
Extracting: E:\images\pxeboot\vmlinuz (4.7 MB)
Extracting: E:\images\TRANS.TBL (442 bytes)
Extracting: E:\isolinux\boot.cat (2 KB)
Extracting: E:\isolinux\boot.msg (84 bytes)
Extracting: E:\isolinux\grub.conf (281 bytes)
Extracting: E:\isolinux\initrd.img (33.3 MB)
Extracting: E:\isolinux\isolinux.bin (24 KB)
Extracting: E:\isolinux\isolinux.cfg (3.0 KB)
Extracting: E:\isolinux\memtest (172.4 KB)
Extracting: E:\isolinux\splash.png (186 bytes)
Extracting: E:\isolinux\TRANS.TBL (2.4 KB)
Extracting: E:\isolinux\upgrade.img (31.6 MB)
Extracting: E:\isolinux\vesamenu.c32 (152.1 KB)
Extracting: E:\isolinux\vmlinuz (4.7 MB)
Extracting: E:\LiveOS\squashfs.img (278.7 MB)
Extracting: E:\LiveOS\TRANS.TBL (224 bytes)
Extracting: E:\Packages\acl-2.2.51-12.el7.x86_64.rpm (80.9 KB)
Extracting: E:\Packages\aic94xx-firmware-30-6.el7.noarch.rpm (23.0 KB)
Extracting: E:\Packages\alsa-firmware-1.0.27-2.el7.noarch.rpm (2.3 MB)
Extracting: E:\Packages\alsa-lib-1.0.27.2-3.el7.x86_64.rpm (389.2 KB)
Extracting: E:\Packages\alsa-tools-firmware-1.0.27-4.el7.x86_64.rpm (34.9 KB)
Extracting: E:\Packages\audit-2.3.3-4.el7.x86_64.rpm (222.6 KB)
Extracting: E:\Packages\audit-libs-2.3.3-4.el7.x86_64.rpm (77.2 KB)
Extracting: E:\Packages\authconfig-6.2.8-8.el7.x86_64.rpm (398.6 KB)
Extracting: E:\Packages\avahi-0.6.31-13.el7.x86_64.rpm (260.4 KB)
Extracting: E:\Packages\avahi-autoipd-0.6.31-13.el7.x86_64.rpm (38.0 KB)
Extracting: E:\Packages\avahi-libs-0.6.31-13.el7.x86_64.rpm (60.3 KB)
Extracting: E:\Packages\basesystem-10.0-7.el7.centos.noarch.rpm (5 KB)
Extracting: E:\Packages\bash-4.2.45-5.el7.x86_64.rpm (1007.3 KB)
Extracting: E:\Packages\bind-libs-lite-9.9.4-14.el7.x86_64.rpm (709.3 KB)
Extracting: E:\Packages\bind-license-9.9.4-14.el7.noarch.rpm (79 KB)
Extracting: E:\Packages\binutils-2.23.52.0.1-16.el7.x86_64.rpm (5 MB)
Extracting: E:\Packages\biosdevname-0.5.0-10.el7.x86_64.rpm (37 KB)
Extracting: E:\Packages\btrfs-progs-3.12-4.el7.x86_64.rpm (411.8 KB)
Extracting: E:\Packages\bzip2-libs-1.0.6-12.el7.x86_64.rpm (39.6 KB)
Extracting: E:\Packages\ca-certificates-2013.1.95-71.el7.noarch.rpm (374.8 KB)
Extracting: E:\Packages\centos-logos-70.0.6-1.el7.centos.noarch.rpm (21.3 MB)
Extracting: E:\Packages\centos-release-7-0.1406.el7.centos.2.3.x86_64.rpm (19.6 KB)
Extracting: E:\Packages\chkconfig-1.3.61-4.el7.x86_64.rpm (171.8 KB)
Extracting: E:\Packages\chrony-1.29.1-1.el7.centos.x86_64.rpm (253.3 KB)
Extracting: E:\Packages\coreutils-8.22-11.el7.x86_64.rpm (3.2 MB)
Extracting: E:\Packages\cpio-2.11-22.el7.x86_64.rpm (209.6 KB)
Extracting: E:\Packages\cracklib-dicts-2.9.0-11.el7.x86_64.rpm (3.6 MB)
Extracting: E:\Packages\cracklib-2.9.0-11.el7.x86_64.rpm (80 KB)
Extracting: E:\Packages\cronie-1.4.11-11.el7.x86_64.rpm (89.2 KB)
Extracting: E:\Packages\cronie-anacron-1.4.11-11.el7.x86_64.rpm (34.1 KB)
Extracting: E:\Packages\crontabs-1.11-6.20121102git.el7.noarch.rpm (12.9 KB)
Extracting: E:\Packages\cryptsetup-libs-1.6.3-2.el7.x86_64.rpm (175.0 KB)
Extracting: E:\Packages\cryptsetup-1.6.3-2.el7.x86_64.rpm (109.7 KB)
Extracting: E:\Packages\curl-7.29.0-19.el7.x86_64.rpm (261.5 KB)
Extracting: E:\Packages\cyrus-sasl-lib-2.1.26-17.el7.x86_64.rpm (154.0 KB)
Extracting: E:\Packages\dbus-1.6.12-8.el7.x86_64.rpm (304.9 KB)
Extracting: E:\Packages\dbus-glib-0.100-7.el7.x86_64.rpm (102.3 KB)
Extracting: E:\Packages\dbus-libs-1.6.12-8.el7.x86_64.rpm (149.9 KB)
Extracting: E:\Packages\dbus-python-1.1.1-9.el7.x86_64.rpm (206.4 KB)
Extracting: E:\Packages\device-mapper-multipath-libs-0.4.9-66.el7.x86_64.rpm (204.6 KB)
Extracting: E:\Packages\device-mapper-multipath-0.4.9-66.el7.x86_64.rpm (106.9 KB)
Extracting: E:\Packages\device-mapper-persistent-data-0.3.2-1.el7.x86_64.rpm (2.7 MB)
Extracting: E:\Packages\device-mapper-libs-1.02.84-14.el7.x86_64.rpm (237.7 KB)
Extracting: E:\Packages\device-mapper-event-libs-1.02.84-14.el7.x86_64.rpm (146.4 KB)
Extracting: E:\Packages\device-mapper-event-1.02.84-14.el7.x86_64.rpm (154 KB)
Extracting: E:\Packages\device-mapper-1.02.84-14.el7.x86_64.rpm (202.3 KB)
Extracting: E:\Packages\dhclient-4.2.5-27.el7.centos.x86_64.rpm (275.6 KB)
Extracting: E:\Packages\dhcp-common-4.2.5-27.el7.centos.x86_64.rpm (169.3 KB)
Extracting: E:\Packages\dhcp-libs-4.2.5-27.el7.centos.x86_64.rpm (125.7 KB)
Extracting: E:\Packages\diffutils-3.3-4.el7.x86_64.rpm (321.9 KB)
Extracting: E:\Packages\dmidecode-2.12-5.el7.x86_64.rpm (78.1 KB)
Extracting: E:\Packages\dnsmasq-2.66-12.el7.x86_64.rpm (227.2 KB)
Extracting: E:\Packages\dosfstools-3.0.20-9.el7.x86_64.rpm (101.1 KB)
Extracting: E:\Packages\dracut-033-161.el7.x86_64.rpm (295.8 KB)
Extracting: E:\Packages\dracut-config-rescue-033-161.el7.x86_64.rpm (41.5 KB)
Extracting: E:\Packages\dracut-network-033-161.el7.x86_64.rpm (77.7 KB)
Extracting: E:\Packages\e2fsprogs-libs-1.42.9-4.el7.x86_64.rpm (165.2 KB)
Extracting: E:\Packages\e2fsprogs-1.42.9-4.el7.x86_64.rpm (691.3 KB)
Extracting: E:\Packages\ebtables-2.0.10-13.el7.x86_64.rpm (122.1 KB)
Extracting: E:\Packages\efibootmgr-0.5.4-18.el7.x86_64.rpm (40.1 KB)
Extracting: E:\Packages\elfutils-libs-0.158-3.el7.x86_64.rpm (238.3 KB)
Extracting: E:\Packages\elfutils-libelf-0.158-3.el7.x86_64.rpm (187.7 KB)
Extracting: E:\Packages\ethtool-3.8-3.el7.x86_64.rpm (108 KB)
Extracting: E:\Packages\expat-2.1.0-8.el7.x86_64.rpm (80.4 KB)
Extracting: E:\Packages\fcoe-utils-1.0.29-6.el7.x86_64.rpm (114.9 KB)
Extracting: E:\Packages\filesystem-3.2-18.el7.x86_64.rpm (1 MB)
Extracting: E:\Packages\file-5.11-21.el7.x86_64.rpm (53.8 KB)
Extracting: E:\Packages\file-libs-5.11-21.el7.x86_64.rpm (336.4 KB)
Extracting: E:\Packages\findutils-4.5.11-3.el7.x86_64.rpm (558.2 KB)
Extracting: E:\Packages\fipscheck-lib-1.4.1-5.el7.x86_64.rpm (10.5 KB)
Extracting: E:\Packages\fipscheck-1.4.1-5.el7.x86_64.rpm (21.2 KB)
Extracting: E:\Packages\firewalld-0.3.9-7.el7.noarch.rpm (477.9 KB)
Extracting: E:\Packages\freetype-2.4.11-9.el7.x86_64.rpm (388.8 KB)
Extracting: E:\Packages\fxload-2002_04_11-16.el7.x86_64.rpm (25.3 KB)
Extracting: E:\Packages\gawk-4.0.2-4.el7.x86_64.rpm (873.4 KB)
Extracting: E:\Packages\gdbm-1.10-8.el7.x86_64.rpm (70.4 KB)
Extracting: E:\Packages\gettext-libs-0.18.2.1-4.el7.x86_64.rpm (434.6 KB)
Extracting: E:\Packages\gettext-0.18.2.1-4.el7.x86_64.rpm (959.3 KB)
Extracting: E:\Packages\glib2-2.36.3-5.el7.x86_64.rpm (2.1 MB)
Extracting: E:\Packages\glibc-2.17-55.el7.x86_64.rpm (3.6 MB)
Extracting: E:\Packages\glibc-common-2.17-55.el7.x86_64.rpm (11.2 MB)
Extracting: E:\Packages\glib-networking-2.36.2-3.el7.x86_64.rpm (119.7 KB)
Extracting: E:\Packages\gmp-5.1.1-5.el7.x86_64.rpm (273.2 KB)
Extracting: E:\Packages\gnupg2-2.0.22-3.el7.x86_64.rpm (1.5 MB)
Extracting: E:\Packages\gnutls-3.1.18-8.el7.x86_64.rpm (608.6 KB)
Extracting: E:\Packages\gobject-introspection-1.36.0-4.el7.x86_64.rpm (222.9 KB)
Extracting: E:\Packages\gpgme-1.3.2-5.el7.x86_64.rpm (145.8 KB)
Extracting: E:\Packages\grep-2.16-1.el7.x86_64.rpm (350.8 KB)
Extracting: E:\Packages\groff-base-1.22.2-8.el7.x86_64.rpm (941.5 KB)
Extracting: E:\Packages\grub2-2.02-0.2.10.el7.centos.1.x86_64.rpm (1.5 MB)
Extracting: E:\Packages\grub2-efi-2.02-0.2.10.el7.centos.1.x86_64.rpm (4.1 MB)
Extracting: E:\Packages\grub2-tools-2.02-0.2.10.el7.centos.1.x86_64.rpm (3.2 MB)
Extracting: E:\Packages\grubby-8.28-8.el7.x86_64.rpm (60.4 KB)
Extracting: E:\Packages\gsettings-desktop-schemas-3.8.2-3.el7.x86_64.rpm (417 KB)
Extracting: E:\Packages\gzip-1.5-7.el7.x86_64.rpm (128.7 KB)
Extracting: E:\Packages\hardlink-1.0-19.el7.x86_64.rpm (14.3 KB)
Extracting: E:\Packages\hostname-3.13-3.el7.x86_64.rpm (16.7 KB)
Extracting: E:\Packages\hwdata-0.252-7.3.el7.noarch.rpm (1.9 MB)
Extracting: E:\Packages\info-5.1-4.el7.x86_64.rpm (232.7 KB)
Extracting: E:\Packages\initscripts-9.49.17-1.el7.x86_64.rpm (421.8 KB)
Extracting: E:\Packages\iproute-3.10.0-13.el7.x86_64.rpm (499.8 KB)
Extracting: E:\Packages\iprutils-2.3.16-4.el7.x86_64.rpm (208.6 KB)
Extracting: E:\Packages\iptables-1.4.21-13.el7.x86_64.rpm (422.5 KB)
Extracting: E:\Packages\iputils-20121221-6.el7.x86_64.rpm (151.8 KB)
Extracting: E:\Packages\irqbalance-1.0.6-5.el7.x86_64.rpm (41.7 KB)
Extracting: E:\Packages\iscsi-initiator-utils-iscsiuio-6.2.0.873-21.el7.x86_64.rpm (79.0 KB)
Extracting: E:\Packages\iscsi-initiator-utils-6.2.0.873-21.el7.x86_64.rpm (411.4 KB)
Extracting: E:\Packages\ivtv-firmware-20080701-26.el7.noarch.rpm (106.2 KB)
Extracting: E:\Packages\iwl1000-firmware-39.31.5.1-34.el7.noarch.rpm (206.4 KB)
Extracting: E:\Packages\iwl100-firmware-39.31.5.1-34.el7.noarch.rpm (143 KB)
Extracting: E:\Packages\iwl105-firmware-18.168.6.1-34.el7.noarch.rpm (227.3 KB)
Extracting: E:\Packages\iwl135-firmware-18.168.6.1-34.el7.noarch.rpm (236.4 KB)
Extracting: E:\Packages\iwl2000-firmware-18.168.6.1-34.el7.noarch.rpm (229.9 KB)
Extracting: E:\Packages\iwl2030-firmware-18.168.6.1-34.el7.noarch.rpm (238.7 KB)
Extracting: E:\Packages\iwl3160-firmware-22.0.7.0-34.el7.noarch.rpm (359.8 KB)
Extracting: E:\Packages\iwl3945-firmware-15.32.2.9-34.el7.noarch.rpm (81.2 KB)
Extracting: E:\Packages\iwl4965-firmware-228.61.2.24-34.el7.noarch.rpm (94.6 KB)
Extracting: E:\Packages\iwl5000-firmware-8.83.5.1_1-34.el7.noarch.rpm (287.2 KB)
Extracting: E:\Packages\iwl5150-firmware-8.24.2.2-34.el7.noarch.rpm (139.7 KB)
Extracting: E:\Packages\iwl6000g2b-firmware-17.168.5.2-34.el7.noarch.rpm (303.3 KB)
Extracting: E:\Packages\iwl6000g2a-firmware-17.168.5.3-34.el7.noarch.rpm (302.8 KB)
Extracting: E:\Packages\iwl6000-firmware-9.221.4.1-34.el7.noarch.rpm (160.0 KB)
Extracting: E:\Packages\iwl6050-firmware-41.28.5.1-34.el7.noarch.rpm (235.7 KB)
Extracting: E:\Packages\iwl7260-firmware-22.0.7.0-34.el7.noarch.rpm (376.1 KB)
Extracting: E:\Packages\jansson-2.4-6.el7.x86_64.rpm (32 KB)
Extracting: E:\Packages\json-c-0.11-3.el7.x86_64.rpm (29.3 KB)
Extracting: E:\Packages\kbd-1.15.5-10.el7.x86_64.rpm (344.6 KB)
Extracting: E:\Packages\kbd-misc-1.15.5-10.el7.noarch.rpm (931.4 KB)
Extracting: E:\Packages\kernel-tools-libs-3.10.0-123.el7.x86_64.rpm (602.9 KB)
Extracting: E:\Packages\kernel-3.10.0-123.el7.x86_64.rpm (28.9 MB)
Extracting: E:\Packages\kernel-tools-3.10.0-123.el7.x86_64.rpm (663.4 KB)
Extracting: E:\Packages\kexec-tools-2.0.4-32.el7.centos.x86_64.rpm (320.2 KB)
Extracting: E:\Packages\keyutils-libs-1.5.8-3.el7.x86_64.rpm (25.3 KB)
Extracting: E:\Packages\kmod-14-9.el7.x86_64.rpm (77.4 KB)
Extracting: E:\Packages\kmod-libs-14-9.el7.x86_64.rpm (45.4 KB)
Extracting: E:\Packages\kpartx-0.4.9-66.el7.x86_64.rpm (50.7 KB)
Extracting: E:\Packages\krb5-libs-1.11.3-49.el7.x86_64.rpm (810.4 KB)
Extracting: E:\Packages\less-458-8.el7.x86_64.rpm (119.6 KB)
Extracting: E:\Packages\libacl-2.2.51-12.el7.x86_64.rpm (26.8 KB)
Extracting: E:\Packages\libaio-0.3.109-12.el7.x86_64.rpm (23.8 KB)
Extracting: E:\Packages\libassuan-2.1.0-3.el7.x86_64.rpm (62.8 KB)
Extracting: E:\Packages\libattr-2.4.46-12.el7.x86_64.rpm (18.1 KB)
Extracting: E:\Packages\libblkid-2.23.2-16.el7.x86_64.rpm (162.3 KB)
Extracting: E:\Packages\libcap-2.22-8.el7.x86_64.rpm (47.1 KB)
Extracting: E:\Packages\libcap-ng-0.7.3-5.el7.x86_64.rpm (23.6 KB)
Extracting: E:\Packages\libcom_err-1.42.9-4.el7.x86_64.rpm (39.6 KB)
Extracting: E:\Packages\libconfig-1.4.9-5.el7.x86_64.rpm (59.4 KB)
Extracting: E:\Packages\libcroco-0.6.8-5.el7.x86_64.rpm (104.2 KB)
Extracting: E:\Packages\libcurl-7.29.0-19.el7.x86_64.rpm (211.5 KB)
Extracting: E:\Packages\libdaemon-0.14-7.el7.x86_64.rpm (29.5 KB)
Extracting: E:\Packages\libdb-5.3.21-17.el7.x86_64.rpm (717.8 KB)
Extracting: E:\Packages\libdb-utils-5.3.21-17.el7.x86_64.rpm (101.3 KB)
Extracting: E:\Packages\libdrm-2.4.50-1.1.el7.x86_64.rpm (121.0 KB)
Extracting: E:\Packages\libedit-3.0-12.20121213cvs.el7.x86_64.rpm (92.4 KB)
Extracting: E:\Packages\libertas-usb8388-firmware-20140213-0.3.git4164c23.el7.noarch.rpm (106.2 KB)
Extracting: E:\Packages\libertas-sd8787-firmware-20140213-0.3.git4164c23.el7.noarch.rpm (310.8 KB)
Extracting: E:\Packages\libertas-sd8686-firmware-20140213-0.3.git4164c23.el7.noarch.rpm (106.3 KB)
Extracting: E:\Packages\libestr-0.1.9-2.el7.x86_64.rpm (20.4 KB)
Extracting: E:\Packages\libffi-3.0.13-11.el7.x86_64.rpm (29.2 KB)
Extracting: E:\Packages\libgcc-4.8.2-16.el7.x86_64.rpm (86.1 KB)
Extracting: E:\Packages\libgcrypt-1.5.3-4.el7.x86_64.rpm (251.2 KB)
Extracting: E:\Packages\libgomp-4.8.2-16.el7.x86_64.rpm (104.2 KB)
Extracting: E:\Packages\libgpg-error-1.12-3.el7.x86_64.rpm (87.2 KB)
Extracting: E:\Packages\libgudev1-208-11.el7.x86_64.rpm (47.3 KB)
Extracting: E:\Packages\libhbaapi-2.2.9-5.el7.x86_64.rpm (23.1 KB)
Extracting: E:\Packages\libhbalinux-1.0.16-3.el7.x86_64.rpm (33.8 KB)
Extracting: E:\Packages\libidn-1.28-3.el7.x86_64.rpm (208.7 KB)
Extracting: E:\Packages\libmnl-1.0.3-7.el7.x86_64.rpm (23.3 KB)
Extracting: E:\Packages\libmodman-2.0.1-8.el7.x86_64.rpm (28.3 KB)
Extracting: E:\Packages\libmount-2.23.2-16.el7.x86_64.rpm (164.9 KB)
Extracting: E:\Packages\libndp-1.2-4.el7.x86_64.rpm (30.3 KB)
Extracting: E:\Packages\libnetfilter_conntrack-1.0.4-2.el7.x86_64.rpm (53.3 KB)
Extracting: E:\Packages\libnfnetlink-1.0.1-4.el7.x86_64.rpm (25.8 KB)
Extracting: E:\Packages\libnl3-3.2.21-6.el7.x86_64.rpm (195.5 KB)
Extracting: E:\Packages\libnl3-cli-3.2.21-6.el7.x86_64.rpm (77.3 KB)
Extracting: E:\Packages\libnl-1.1.4-3.el7.x86_64.rpm (128.0 KB)
Extracting: E:\Packages\libpcap-1.5.3-3.el7.x86_64.rpm (137.1 KB)
Extracting: E:\Packages\libpciaccess-0.13.1-4.1.el7.x86_64.rpm (25.2 KB)
Extracting: E:\Packages\libpipeline-1.2.3-3.el7.x86_64.rpm (53.3 KB)
Extracting: E:\Packages\libproxy-0.4.11-6.el7.x86_64.rpm (64.6 KB)
Extracting: E:\Packages\libpwquality-1.2.3-4.el7.x86_64.rpm (84.3 KB)
Extracting: E:\Packages\libreport-filesystem-2.1.11-10.el7.centos.x86_64.rpm (32.2 KB)
Extracting: E:\Packages\libselinux-utils-2.2.2-6.el7.x86_64.rpm (135.3 KB)
Extracting: E:\Packages\libselinux-python-2.2.2-6.el7.x86_64.rpm (246.9 KB)
Extracting: E:\Packages\libselinux-2.2.2-6.el7.x86_64.rpm (144.7 KB)
Extracting: E:\Packages\libsemanage-2.1.10-16.el7.x86_64.rpm (120.9 KB)
Extracting: E:\Packages\libsepol-2.1.9-3.el7.x86_64.rpm (154 KB)
Extracting: E:\Packages\libsoup-2.42.2-3.el7.x86_64.rpm (326.5 KB)
Extracting: E:\Packages\libssh2-1.4.3-8.el7.x86_64.rpm (133.1 KB)
Extracting: E:\Packages\libss-1.42.9-4.el7.x86_64.rpm (44.2 KB)
Extracting: E:\Packages\libstdc++-4.8.2-16.el7.x86_64.rpm (287.9 KB)
Extracting: E:\Packages\libsysfs-2.1.0-16.el7.x86_64.rpm (46.3 KB)
Extracting: E:\Packages\libtasn1-3.3-3.el7.x86_64.rpm (315.8 KB)
Extracting: E:\Packages\libteam-1.9-15.el7.x86_64.rpm (43.8 KB)
Extracting: E:\Packages\libunistring-0.9.3-9.el7.x86_64.rpm (293.3 KB)
Extracting: E:\Packages\libuser-0.60-5.el7.x86_64.rpm (397.3 KB)
Extracting: E:\Packages\libutempter-1.1.6-4.el7.x86_64.rpm (24.8 KB)
Extracting: E:\Packages\libuuid-2.23.2-16.el7.x86_64.rpm (71.5 KB)
Extracting: E:\Packages\libverto-0.2.5-4.el7.x86_64.rpm (16.4 KB)
Extracting: E:\Packages\libxml2-2.9.1-5.el7.x86_64.rpm (663.6 KB)
Extracting: E:\Packages\linux-firmware-20140213-0.3.git4164c23.el7.noarch.rpm (19.8 MB)
Extracting: E:\Packages\lldpad-0.9.46-8.el7.x86_64.rpm (239.7 KB)
Extracting: E:\Packages\logrotate-3.8.6-4.el7.x86_64.rpm (64.3 KB)
Extracting: E:\Packages\lua-5.1.4-14.el7.x86_64.rpm (200.6 KB)
Extracting: E:\Packages\lvm2-2.02.105-14.el7.x86_64.rpm (818.3 KB)
Extracting: E:\Packages\lvm2-libs-2.02.105-14.el7.x86_64.rpm (709.3 KB)
Extracting: E:\Packages\lzo-2.06-6.el7.x86_64.rpm (58.3 KB)
Extracting: E:\Packages\make-3.82-21.el7.x86_64.rpm (420.1 KB)
Extracting: E:\Packages\man-db-2.6.3-9.el7.x86_64.rpm (558.8 KB)
Extracting: E:\Packages\mariadb-libs-5.5.35-3.el7.x86_64.rpm (753.3 KB)
Extracting: E:\Packages\mdadm-3.2.6-31.el7.x86_64.rpm (357.6 KB)
Extracting: E:\Packages\microcode_ctl-2.1-7.1.el7.x86_64.rpm (472.2 KB)
Extracting: E:\Packages\ModemManager-glib-1.1.0-6.git20130913.el7.x86_64.rpm (204.4 KB)
Extracting: E:\Packages\mokutil-0.7-5.el7.x86_64.rpm (22.7 KB)
Extracting: E:\Packages\mozjs17-17.0.0-10.el7.x86_64.rpm (1.4 MB)
Extracting: E:\Packages\ncurses-libs-5.9-13.20130511.el7.x86_64.rpm (315.5 KB)
Extracting: E:\Packages\ncurses-base-5.9-13.20130511.el7.noarch.rpm (68.2 KB)
Extracting: E:\Packages\ncurses-5.9-13.20130511.el7.x86_64.rpm (303.5 KB)
Extracting: E:\Packages\nettle-2.7.1-2.el7.x86_64.rpm (325.9 KB)
Extracting: E:\Packages\NetworkManager-config-server-0.9.9.1-13.git20140326.4dba720.el7.x86_64.rpm (101.3 KB)
Extracting: E:\Packages\NetworkManager-tui-0.9.9.1-13.git20140326.4dba720.el7.x86_64.rpm (188.7 KB)
Extracting: E:\Packages\NetworkManager-glib-0.9.9.1-13.git20140326.4dba720.el7.x86_64.rpm (367.6 KB)
Extracting: E:\Packages\NetworkManager-0.9.9.1-13.git20140326.4dba720.el7.x86_64.rpm (1.4 MB)
Extracting: E:\Packages\newt-0.52.15-4.el7.x86_64.rpm (104.9 KB)
Extracting: E:\Packages\newt-python-0.52.15-4.el7.x86_64.rpm (53.9 KB)
Extracting: E:\Packages\nspr-4.10.2-4.el7.x86_64.rpm (124.8 KB)
Extracting: E:\Packages\nss-3.15.4-6.el7.x86_64.rpm (876.5 KB)
Extracting: E:\Packages\nss-softokn-freebl-3.15.4-2.el7.x86_64.rpm (195.7 KB)
Extracting: E:\Packages\nss-softokn-3.15.4-2.el7.x86_64.rpm (306.8 KB)
Extracting: E:\Packages\nss-sysinit-3.15.4-6.el7.x86_64.rpm (48.2 KB)
Extracting: E:\Packages\nss-tools-3.15.4-6.el7.x86_64.rpm (468.5 KB)
Extracting: E:\Packages\nss-util-3.15.4-2.el7.x86_64.rpm (69.0 KB)
Extracting: E:\Packages\numactl-libs-2.0.9-2.el7.x86_64.rpm (28.8 KB)
Extracting: E:\Packages\openldap-2.4.39-3.el7.x86_64.rpm (342.9 KB)
Extracting: E:\Packages\openssl-libs-1.0.1e-34.el7.x86_64.rpm (938.9 KB)
Extracting: E:\Packages\openssh-server-6.4p1-8.el7.x86_64.rpm (367.2 KB)
Extracting: E:\Packages\openssh-clients-6.4p1-8.el7.x86_64.rpm (469.7 KB)
Extracting: E:\Packages\openssh-6.4p1-8.el7.x86_64.rpm (340.5 KB)
Extracting: E:\Packages\openssl-1.0.1e-34.el7.x86_64.rpm (704.5 KB)
Extracting: E:\Packages\os-prober-1.58-5.el7.x86_64.rpm (41.0 KB)
Extracting: E:\Packages\p11-kit-trust-0.18.7-4.el7.x86_64.rpm (74.4 KB)
Extracting: E:\Packages\p11-kit-0.18.7-4.el7.x86_64.rpm (100.2 KB)
Extracting: E:\Packages\pam-1.1.8-9.el7.x86_64.rpm (712.4 KB)
Extracting: E:\Packages\parted-3.1-17.el7.x86_64.rpm (604.1 KB)
Extracting: E:\Packages\passwd-0.79-4.el7.x86_64.rpm (104.8 KB)
Extracting: E:\Packages\pciutils-libs-3.2.1-4.el7.x86_64.rpm (44.6 KB)
Extracting: E:\Packages\pcre-8.32-12.el7.x86_64.rpm (417.5 KB)
Extracting: E:\Packages\pinentry-0.8.1-14.el7.x86_64.rpm (72.2 KB)
Extracting: E:\Packages\pkgconfig-0.27.1-4.el7.x86_64.rpm (53.6 KB)
Extracting: E:\Packages\plymouth-scripts-0.8.9-0.10.20140113.el7.centos.x86_64.rpm (35.3 KB)
Extracting: E:\Packages\plymouth-core-libs-0.8.9-0.10.20140113.el7.centos.x86_64.rpm (105.8 KB)
Extracting: E:\Packages\plymouth-0.8.9-0.10.20140113.el7.centos.x86_64.rpm (111.9 KB)
Extracting: E:\Packages\policycoreutils-2.2.5-11.el7.x86_64.rpm (801 KB)
Extracting: E:\Packages\polkit-0.112-5.el7.x86_64.rpm (165.5 KB)
Extracting: E:\Packages\polkit-pkla-compat-0.1-4.el7.x86_64.rpm (38.9 KB)
Extracting: E:\Packages\popt-1.13-16.el7.x86_64.rpm (41.7 KB)
Extracting: E:\Packages\postfix-2.10.1-6.el7.x86_64.rpm (2.4 MB)
Extracting: E:\Packages\ppp-2.4.5-33.el7.x86_64.rpm (357.1 KB)
Extracting: E:\Packages\procps-ng-3.3.9-6.el7.x86_64.rpm (279.9 KB)
Extracting: E:\Packages\pth-2.0.7-22.el7.x86_64.rpm (88.9 KB)
Extracting: E:\Packages\pygobject3-base-3.8.2-4.el7.x86_64.rpm (294.7 KB)
Extracting: E:\Packages\pygpgme-0.3-9.el7.x86_64.rpm (62.6 KB)
Extracting: E:\Packages\pyliblzma-0.5.3-11.el7.x86_64.rpm (46.6 KB)
Extracting: E:\Packages\python-slip-dbus-0.4.0-2.el7.noarch.rpm (31.1 KB)
Extracting: E:\Packages\python-slip-0.4.0-2.el7.noarch.rpm (30.2 KB)
Extracting: E:\Packages\python-pyudev-0.15-6.el7.noarch.rpm (54.1 KB)
Extracting: E:\Packages\python-backports-ssl_match_hostname-3.4.0.2-4.el7.noarch.rpm (11.9 KB)
Extracting: E:\Packages\python-2.7.5-16.el7.x86_64.rpm (85.6 KB)
Extracting: E:\Packages\python-backports-1.0-6.el7.noarch.rpm (4.9 KB)
Extracting: E:\Packages\python-configobj-4.7.2-7.el7.noarch.rpm (116.9 KB)
Extracting: E:\Packages\python-decorator-3.4.0-3.el7.noarch.rpm (27.1 KB)
Extracting: E:\Packages\python-iniparse-0.4-9.el7.noarch.rpm (38.9 KB)
Extracting: E:\Packages\python-libs-2.7.5-16.el7.x86_64.rpm (5.6 MB)
Extracting: E:\Packages\python-pycurl-7.19.0-17.el7.x86_64.rpm (80.1 KB)
Extracting: E:\Packages\python-setuptools-0.9.8-3.el7.noarch.rpm (396.1 KB)
Extracting: E:\Packages\python-urlgrabber-3.10-4.el7.noarch.rpm (106.9 KB)
Extracting: E:\Packages\pyxattr-0.5.1-5.el7.x86_64.rpm (27.6 KB)
Extracting: E:\Packages\qrencode-libs-3.4.1-3.el7.x86_64.rpm (49.9 KB)
Extracting: E:\Packages\readline-6.2-9.el7.x86_64.rpm (192.3 KB)
Extracting: E:\Packages\rootfiles-8.1-11.el7.noarch.rpm (7.3 KB)
Extracting: E:\Packages\rpm-4.11.1-16.el7.x86_64.rpm (1.1 MB)
Extracting: E:\Packages\rpm-build-libs-4.11.1-16.el7.x86_64.rpm (99.5 KB)
Extracting: E:\Packages\rpm-libs-4.11.1-16.el7.x86_64.rpm (267.5 KB)
Extracting: E:\Packages\rpm-python-4.11.1-16.el7.x86_64.rpm (74.5 KB)
Extracting: E:\Packages\rsyslog-7.4.7-6.el7.x86_64.rpm (555.7 KB)
Extracting: E:\Packages\sed-4.2.2-5.el7.x86_64.rpm (230.9 KB)
Extracting: E:\Packages\selinux-policy-targeted-3.12.1-153.el7.noarch.rpm (3.8 MB)
Extracting: E:\Packages\selinux-policy-3.12.1-153.el7.noarch.rpm (338.6 KB)
Extracting: E:\Packages\setup-2.8.71-4.el7.noarch.rpm (163.9 KB)
Extracting: E:\Packages\shadow-utils-4.1.5.1-13.el7.x86_64.rpm (1.1 MB)
Extracting: E:\Packages\shared-mime-info-1.1-7.el7.x86_64.rpm (369.9 KB)
Extracting: E:\Packages\shim-0.7-5.2.el7.centos.2.x86_64.rpm (671 KB)
Extracting: E:\Packages\shim-unsigned-0.7-5.el7.x86_64.rpm (493.7 KB)
Extracting: E:\Packages\slang-2.2.4-11.el7.x86_64.rpm (511.8 KB)
Extracting: E:\Packages\snappy-1.1.0-3.el7.x86_64.rpm (40.0 KB)
Extracting: E:\Packages\sqlite-3.7.17-4.el7.x86_64.rpm (393.2 KB)
Extracting: E:\Packages\sudo-1.8.6p7-11.el7.x86_64.rpm (717.1 KB)
Extracting: E:\Packages\systemd-sysv-208-11.el7.x86_64.rpm (35 KB)
Extracting: E:\Packages\systemd-libs-208-11.el7.x86_64.rpm (152.8 KB)
Extracting: E:\Packages\systemd-208-11.el7.x86_64.rpm (2.6 MB)
Extracting: E:\Packages\sysvinit-tools-2.88-14.dsf.el7.x86_64.rpm (62.8 KB)
Extracting: E:\Packages\tar-1.26-29.el7.x86_64.rpm (843.1 KB)
Extracting: E:\Packages\tcp_wrappers-libs-7.6-77.el7.x86_64.rpm (66.3 KB)
Extracting: E:\Packages\teamd-1.9-15.el7.x86_64.rpm (103.4 KB)
Extracting: E:\Packages\TRANS.TBL (77.1 KB)
Extracting: E:\Packages\tuned-2.3.0-11.el7.noarch.rpm (144.5 KB)
Extracting: E:\Packages\tzdata-2014b-1.el7.noarch.rpm (430.1 KB)
Extracting: E:\Packages\ustr-1.0.4-16.el7.x86_64.rpm (92.2 KB)
Extracting: E:\Packages\util-linux-2.23.2-16.el7.x86_64.rpm (1.8 MB)
Extracting: E:\Packages\vim-minimal-7.4.160-1.el7.x86_64.rpm (436 KB)
Extracting: E:\Packages\virt-what-1.13-5.el7.x86_64.rpm (26.1 KB)
Extracting: E:\Packages\which-2.20-7.el7.x86_64.rpm (40.7 KB)
Extracting: E:\Packages\wpa_supplicant-2.0-12.el7.x86_64.rpm (800.5 KB)
Extracting: E:\Packages\xfsprogs-3.2.0-0.10.alpha2.el7.x86_64.rpm (846.6 KB)
Extracting: E:\Packages\xz-5.1.2-8alpha.el7.x86_64.rpm (199.5 KB)
Extracting: E:\Packages\xz-libs-5.1.2-8alpha.el7.x86_64.rpm (101.7 KB)
Extracting: E:\Packages\yum-3.4.3-118.el7.centos.noarch.rpm (1.2 MB)
Extracting: E:\Packages\yum-metadata-parser-1.1.4-10.el7.x86_64.rpm (27.7 KB)
Extracting: E:\Packages\yum-plugin-fastestmirror-1.1.31-24.el7.noarch.rpm (27.7 KB)
Extracting: E:\Packages\zlib-1.2.7-13.el7.x86_64.rpm (89.3 KB)
libcdio: from_733: broken byte order
libcdio: from_733: broken byte order
libcdio: from_733: broken byte order
libcdio: from_733: broken byte order
libcdio: from_733: broken byte order
libcdio: from_733: broken byte order
libcdio: from_733: broken byte order
libcdio: from_733: broken byte order
Extracting: E:\repodata\86efe4a44f759b37c79b16110978a4960fe1b95ee772477af9f7a5533a1de09c-c7-minimal-x86_64-comps.xml.gz (3.6 KB)
Extracting: E:\repodata\9aca0ed52f80e35442bfbf2e19d7149e266f325f7f6315046c7f94955e80203f-primary.sqlite.bz2 (572.9 KB)
Extracting: E:\repodata\a101a8c05dea39e53b413a7f6320f24b4075f694c65fab925ba5702734cbf952-filelists.sqlite.bz2 (230.1 KB)
Extracting: E:\repodata\b17c735c6d2627434ad7f5b6f8c1664a8bcdb7340b133f1e05516542ce1a2ddb-primary.xml.gz (283.8 KB)
Extracting: E:\repodata\b7589214a692dbda8b8a56cf058df1b0e00b389d91c9be758027406ad9c34cc4-c7-minimal-x86_64-comps.xml (15.2 KB)
Extracting: E:\repodata\cbb410ad2e8fd58a06cb404712507486ef6af302f45e734b2941775fb9a09358-other.sqlite.bz2 (136 KB)
Extracting: E:\repodata\e3e1a83beefde2c83b3ee4b52cfe88183b0bdb03a31f216c389e22c58561e1e5-other.xml.gz (118.1 KB)
Extracting: E:\repodata\fe0f205affa4767385abeb08956228083700b0851d4a7559ea49f196b364ce0e-filelists.xml.gz (181.4 KB)
Extracting: E:\repodata\repomd.xml (3.6 KB)
Extracting: E:\repodata\TRANS.TBL (2.5 KB)
Extracting: E:\RPM-GPG-KEY-CentOS-Testing-7 (1.7 KB)
Extracting: E:\RPM-GPG-KEY-CentOS-7 (1.7 KB)
Extracting: E:\TRANS.TBL (2.8 KB)
Extracting: E:\.discinfo (32 bytes)
Extracting: E:\.treeinfo (992 bytes)
Created: E:\syslinux.cfg
Finalizing, please wait...
Found USB 2.0 device 'USB2.0 Flash Disk USB Device' (1221:3234)
1 device found
Disk type: Removable, Sector Size: 512 bytes
Cylinders: 257, TracksPerCylinder: 255, SectorsPerTrack: 63
Partition type: MBR, NB Partitions: 1
Disk ID: 0x001E18ED
Drive has a Syslinux Master Boot Record
Partition 1:
Type: FAT32 LBA (0x0c)
Size: 2.0 GB (2117074944 bytes)
Start Sector: 2048, Boot: Yes, Recognized: Yes
Shouldn't the slow format have picked up the bad blocks?
I'm afraid not. Slow format doesn't verify data any more than quick format. The only difference between slow and quick format is that slow will fill each individual data block on the device with zeroes (without verifying the data being written), whereas quick format just overwrites a few index blocks to indicate that the device can be considered empty (but without erasing each individual data block).
I may add a verify write option in a future version of Rufus, but this is not a very high priority feature right now.
I will however keep this issue opened for now, to remind me that I need to look at the following errors:
libcdio: from_733: broken byte order
I had observed those as well when testing, and, while I believe they are benign, I'd still like to get these messages removed.
Pete, I jumped the gun in reporting the problem solved. I was so relieved to get past the initial problem I assumed the init script would bring up the gui that allows me to configure Centos 7.
The init script stalled and when I pressed escape I got an error message and advice to run journalctl. I'll send you more detail this evening when I've had a chance to study the error messages in the journal.
I ran rawrite on the same USB and it works fine and I was prepared to let the matter rest as I had a working solution, but since you've observed another issue with the build I got I'll send you details of the init script crash.
MJR
I created a new bootable usb using rufus and booted the target netbook from it. It looked good for a little while, then the machine hung at "Reached target Basic System".
I pressed escape and the machine went into the usual load mode with a coloured Centos 7 (Core) line running along the bottom of the screen. Soon the machine dropped into command line mode advising that there were problems and advising me to run journalctl. I copied journalctl on to another usb. I have underlined and bolded the error mesages from the original journal.
The journal - which is in RTF mode so I could highlight the error messages - hasn't come through. Where can I send it to so you can read the error messages?
I'm afraid that what happens during the installation process has to do with CentOS more than Rufus, and I hope you can understand that I can't really provide dedicated support for the installation of the many Linux distributions that exist out there.
Unfortunately, developers who design a Linux installation process do not always take into account that an ISO may be converted to an USB drive using a third party method, so there's no guarantee that the post boot process will work. Maybe you should try to take this issue to the CentOS forums, where they may have an idea of what you can do. They are the specialists for what will make their install process work.
I understand your position. However, if Process A (rawrite) transfers an iso to a usb and the usb installs properly, but Process B (rufus) transfers the same iso to the same usb and the usb doesn't install properly it is reasonable to assume that Process B is faulty.
The issue is academic to me as I got the desired result using rawrite. Thanks for your assistance.
Different processes produce different results. Without looking at it, I can see quite a few reasons for rawwrite to work (specific disk ID, deviation from standard syslinux, etc.) whereas Rufus wouldn't.
What I hope you can understand however is that the CentOS people only have to care about their process of choice, and ensure that it work for a single distribution. In general, this is fairly easy to accomplish and doesn't require a lot of involvement.
On the other hand, a generic tool such as Rufus has to try to work with ALL Linux distributions out there. Overall, it does a pretty good job as the ones that fail to work with Rufus are rare. But trying to cater to the ones that do custom stuff in their boot or installation process, as CentOS appears to do, is not really something that can be achieved from a free application that is being developed by a single developer in his limited spare time.
Also, Rufus does support raw-writing (what it calls DD-Image mode). If the ISO is compatible with this mode, which would seem to be the case for CentOS (haven't tested), you can simply disable ISO mode (Alt-I) and you should be able to get the installation to work.
Thus, I would say that your statement that Process B is faulty is most likely factually incorrect - you can probably make process B work if you use the right option, as it's not the default one...
I'll give your (Alt-I https://github.com/pbatard/rufus/wiki/FAQ#Power_keysCheat_modes) suggestion a try over the weekend and let you know the result. It is quite time consuming when things go wrong, as they did yesterday with a brand-new usb that crashed half-way through the rufus iso-to-usb build. The usb became unwriteable and I spent several hours trying to make it writeable again, all wasted time in the end as I had to chuck the usb in the bin and get another one.
I've attached the Centos journal from the faulty build, encapsulating
the Centos error messages in ===== lines. It seems there was a problem
allocating disk drives.
-- Logs begin at Thu 2014-10-09 03:58:29 UTC, end at Thu 2014-10-09 04:01:51 UTC. --
Oct 09 03:58:29 localhost systemd-journal[84]: Runtime journal is using 8.0M (max 99.6M, leaving 149.4M of free 988.0M, current limit 99.6M).
Oct 09 03:58:29 localhost systemd-journal[84]: Runtime journal is using 8.0M (max 99.6M, leaving 149.4M of free 988.0M, current limit 99.6M).
Oct 09 03:58:29 localhost kernel: Initializing cgroup subsys cpuset
Oct 09 03:58:29 localhost kernel: Initializing cgroup subsys cpu
Oct 09 03:58:29 localhost kernel: Initializing cgroup subsys cpuacct
Oct 09 03:58:29 localhost kernel: Linux version 3.10.0-123.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.2 20140120 (Red Hat 4.8.2-16) (GCC) ) #1 SMP Mon Jun 30 12:09:22 UTC 2014
Oct 09 03:58:29 localhost kernel: Command line: initrd=initrd.img inst.stage2=hd:LABEL=CentOS\x207\x20x86_64 rd.live.check quiet BOOT_IMAGE=vmlinuz
Oct 09 03:58:29 localhost kernel: e820: BIOS-provided physical RAM map:
Oct 09 03:58:29 localhost kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
Oct 09 03:58:29 localhost kernel: BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
Oct 09 03:58:29 localhost kernel: BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
Oct 09 03:58:29 localhost kernel: BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
Oct 09 03:58:29 localhost kernel: BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
Oct 09 03:58:29 localhost kernel: BIOS-e820: [mem 0x0000000000100000-0x000000007f5cffff] usable
Oct 09 03:58:29 localhost kernel: BIOS-e820: [mem 0x000000007f5d0000-0x000000007f5dffff] ACPI data
Oct 09 03:58:29 localhost kernel: BIOS-e820: [mem 0x000000007f5e0000-0x000000007f5e2fff] ACPI NVS
Oct 09 03:58:29 localhost kernel: BIOS-e820: [mem 0x000000007f5e3000-0x000000007fffffff] reserved
Oct 09 03:58:29 localhost kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
Oct 09 03:58:29 localhost kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
Oct 09 03:58:29 localhost kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Oct 09 03:58:29 localhost kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Oct 09 03:58:29 localhost kernel: NX (Execute Disable) protection: active
Oct 09 03:58:29 localhost kernel: SMBIOS 2.5 present.
Oct 09 03:58:29 localhost kernel: DMI: Intel Corporation Pine Trail - M CRB/Pine Trail - M CRB, BIOS 6.00 01/14/2011
Oct 09 03:58:29 localhost kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Oct 09 03:58:29 localhost kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Oct 09 03:58:29 localhost kernel: No AGP bridge found
Oct 09 03:58:29 localhost kernel: e820: last_pfn = 0x7f5d0 max_arch_pfn = 0x400000000
Oct 09 03:58:29 localhost kernel: MTRR default type: uncachable
Oct 09 03:58:29 localhost kernel: MTRR fixed ranges enabled:
Oct 09 03:58:29 localhost kernel: 00000-9FFFF write-back
Oct 09 03:58:29 localhost kernel: A0000-BFFFF uncachable
Oct 09 03:58:29 localhost kernel: C0000-CFFFF write-protect
Oct 09 03:58:29 localhost kernel: D0000-DFFFF uncachable
Oct 09 03:58:29 localhost kernel: E0000-FFFFF write-protect
Oct 09 03:58:29 localhost kernel: MTRR variable ranges enabled:
Oct 09 03:58:29 localhost kernel: 0 base 000000000 mask 080000000 write-back
Oct 09 03:58:29 localhost kernel: 1 base 07F600000 mask 0FFE00000 uncachable
Oct 09 03:58:29 localhost kernel: 2 base 07F800000 mask 0FF800000 uncachable
Oct 09 03:58:29 localhost kernel: 3 disabled
Oct 09 03:58:29 localhost kernel: 4 disabled
Oct 09 03:58:29 localhost kernel: 5 disabled
Oct 09 03:58:29 localhost kernel: 6 disabled
Oct 09 03:58:29 localhost kernel: 7 disabled
Oct 09 03:58:29 localhost kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Oct 09 03:58:29 localhost kernel: original variable MTRRs
Oct 09 03:58:29 localhost kernel: reg 0, base: 0GB, range: 2GB, type WB
Oct 09 03:58:29 localhost kernel: reg 1, base: 2038MB, range: 2MB, type UC
Oct 09 03:58:29 localhost kernel: reg 2, base: 2040MB, range: 8MB, type UC
Oct 09 03:58:29 localhost kernel: total RAM covered: 2038M
Oct 09 03:58:29 localhost kernel: Found optimal setting for mtrr clean up
Oct 09 03:58:29 localhost kernel: gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
Oct 09 03:58:29 localhost kernel: New variable MTRRs
Oct 09 03:58:29 localhost kernel: reg 0, base: 0GB, range: 2GB, type WB
Oct 09 03:58:29 localhost kernel: reg 1, base: 2038MB, range: 2MB, type UC
Oct 09 03:58:29 localhost kernel: reg 2, base: 2040MB, range: 8MB, type UC
Oct 09 03:58:29 localhost kernel: found SMP MP-table at [mem 0x000f7f90-0x000f7f9f] mapped at [ffff8800000f7f90]
Oct 09 03:58:29 localhost kernel: Base memory trampoline at [ffff880000097000] 97000 size 24576
Oct 09 03:58:29 localhost kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Oct 09 03:58:29 localhost kernel: [mem 0x00000000-0x000fffff] page 4k
Oct 09 03:58:29 localhost kernel: BRK [0x01e1d000, 0x01e1dfff] PGTABLE
Oct 09 03:58:29 localhost kernel: BRK [0x01e1e000, 0x01e1efff] PGTABLE
Oct 09 03:58:29 localhost kernel: BRK [0x01e1f000, 0x01e1ffff] PGTABLE
Oct 09 03:58:29 localhost kernel: init_memory_mapping: [mem 0x7d200000-0x7d3fffff]
Oct 09 03:58:29 localhost kernel: [mem 0x7d200000-0x7d3fffff] page 2M
Oct 09 03:58:29 localhost kernel: BRK [0x01e20000, 0x01e20fff] PGTABLE
Oct 09 03:58:29 localhost kernel: init_memory_mapping: [mem 0x7c000000-0x7d1fffff]
Oct 09 03:58:29 localhost kernel: [mem 0x7c000000-0x7d1fffff] page 2M
Oct 09 03:58:29 localhost kernel: init_memory_mapping: [mem 0x00100000-0x7bffffff]
Oct 09 03:58:29 localhost kernel: [mem 0x00100000-0x001fffff] page 4k
Oct 09 03:58:29 localhost kernel: [mem 0x00200000-0x7bffffff] page 2M
Oct 09 03:58:29 localhost kernel: init_memory_mapping: [mem 0x7d400000-0x7f5cffff]
Oct 09 03:58:29 localhost kernel: [mem 0x7d400000-0x7f3fffff] page 2M
Oct 09 03:58:29 localhost kernel: [mem 0x7f400000-0x7f5cffff] page 4k
Oct 09 03:58:29 localhost kernel: BRK [0x01e21000, 0x01e21fff] PGTABLE
Oct 09 03:58:29 localhost kernel: RAMDISK: [mem 0x7d47d000-0x7f5cefff]
Oct 09 03:58:29 localhost kernel: ACPI: RSDP 00000000000f7f60 00024 (v02 PTLTD )
Oct 09 03:58:29 localhost kernel: ACPI: XSDT 000000007f5d876e 0005C (v01 PTLTD ? XSDT 06040000 LTP 00000000)
Oct 09 03:58:29 localhost kernel: ACPI: FACP 000000007f5dfe4a 000F4 (v03 INTEL 06040000 PTL 00000002)
Oct 09 03:58:29 localhost kernel: ACPI: DSDT 000000007f5d98ec 064EA (v01 INTEL BEARG31A 06040000 MSFT 03000000)
Oct 09 03:58:29 localhost kernel: ACPI: FACS 000000007f5e2fc0 00040
Oct 09 03:58:29 localhost kernel: ACPI: TCPA 000000007f5dff3e 00032 (v01 Phoeni x 06040000 TL 00000000)
Oct 09 03:58:29 localhost kernel: ACPI: APIC 000000007f5dff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
Oct 09 03:58:29 localhost kernel: ACPI: BOOT 000000007f5dffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
Oct 09 03:58:29 localhost kernel: ACPI: SSDT 000000007f5d8d4c 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
Oct 09 03:58:29 localhost kernel: ACPI: SSDT 000000007f5d8ca6 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
Oct 09 03:58:29 localhost kernel: ACPI: SSDT 000000007f5d87ca 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
Oct 09 03:58:29 localhost kernel: ACPI: Local APIC address 0xfee00000
Oct 09 03:58:29 localhost kernel: No NUMA configuration found
Oct 09 03:58:29 localhost kernel: Faking a node at [mem 0x0000000000000000-0x000000007f5cffff]
Oct 09 03:58:29 localhost kernel: Initmem setup node 0 [mem 0x00000000-0x7f5cffff]
Oct 09 03:58:29 localhost kernel: NODE_DATA [mem 0x7d456000-0x7d47cfff]
Oct 09 03:58:29 localhost kernel: [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007ac00000-ffff88007cbfffff] on node 0
Oct 09 03:58:29 localhost kernel: Zone ranges:
Oct 09 03:58:29 localhost kernel: DMA [mem 0x00001000-0x00ffffff]
Oct 09 03:58:29 localhost kernel: DMA32 [mem 0x01000000-0xffffffff]
Oct 09 03:58:29 localhost kernel: Normal empty
Oct 09 03:58:29 localhost kernel: Movable zone start for each node
Oct 09 03:58:29 localhost kernel: Early memory node ranges
Oct 09 03:58:29 localhost kernel: node 0: [mem 0x00001000-0x0009cfff]
Oct 09 03:58:29 localhost kernel: node 0: [mem 0x00100000-0x7f5cffff]
Oct 09 03:58:29 localhost kernel: On node 0 totalpages: 521580
Oct 09 03:58:29 localhost kernel: DMA zone: 64 pages used for memmap
Oct 09 03:58:29 localhost kernel: DMA zone: 21 pages reserved
Oct 09 03:58:29 localhost kernel: DMA zone: 3996 pages, LIFO batch:0
Oct 09 03:58:29 localhost kernel: DMA32 zone: 8088 pages used for memmap
Oct 09 03:58:29 localhost kernel: DMA32 zone: 517584 pages, LIFO batch:31
Oct 09 03:58:29 localhost kernel: ACPI: PM-Timer IO Port: 0x1008
Oct 09 03:58:29 localhost kernel: ACPI: Local APIC address 0xfee00000
Oct 09 03:58:29 localhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 09 03:58:29 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Oct 09 03:58:29 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Oct 09 03:58:29 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Oct 09 03:58:29 localhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 09 03:58:29 localhost kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Oct 09 03:58:29 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Oct 09 03:58:29 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 09 03:58:29 localhost kernel: ACPI: IRQ0 used by override.
Oct 09 03:58:29 localhost kernel: ACPI: IRQ2 used by override.
Oct 09 03:58:29 localhost kernel: ACPI: IRQ9 used by override.
Oct 09 03:58:29 localhost kernel: Using ACPI (MADT) for SMP configuration information
Oct 09 03:58:29 localhost kernel: smpboot: Allowing 2 CPUs, 0 hotplug CPUs
Oct 09 03:58:29 localhost kernel: nr_irqs_gsi: 40
Oct 09 03:58:29 localhost kernel: PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
Oct 09 03:58:29 localhost kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
Oct 09 03:58:29 localhost kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
Oct 09 03:58:29 localhost kernel: PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
Oct 09 03:58:29 localhost kernel: PM: Registered nosave memory: [mem 0x000d0000-0x000dbfff]
Oct 09 03:58:29 localhost kernel: PM: Registered nosave memory: [mem 0x000dc000-0x000dffff]
Oct 09 03:58:29 localhost kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
Oct 09 03:58:29 localhost kernel: PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
Oct 09 03:58:29 localhost kernel: e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Oct 09 03:58:29 localhost kernel: Booting paravirtualized kernel on bare hardware
Oct 09 03:58:29 localhost kernel: setup_percpu: NR_CPUS:5120 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
Oct 09 03:58:29 localhost kernel: PERCPU: Embedded 29 pages/cpu @ffff88007d200000 s86592 r8192 d24000 u1048576
Oct 09 03:58:29 localhost kernel: pcpu-alloc: s86592 r8192 d24000 u1048576 alloc=1*2097152
Oct 09 03:58:29 localhost kernel: pcpu-alloc: [0] 0 1
Oct 09 03:58:29 localhost kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 513407
Oct 09 03:58:29 localhost kernel: Policy zone: DMA32
Oct 09 03:58:29 localhost kernel: Kernel command line: initrd=initrd.img inst.stage2=hd:LABEL=CentOS\x207\x20x86_64 rd.live.check quiet BOOT_IMAGE=vmlinuz
Oct 09 03:58:29 localhost kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Oct 09 03:58:29 localhost kernel: Checking aperture...
Oct 09 03:58:29 localhost kernel: No AGP bridge found
Oct 09 03:58:29 localhost kernel: Memory: 2004228k/2086720k available (6105k kernel code, 400k absent, 82092k reserved, 4065k data, 1584k init)
Oct 09 03:58:29 localhost kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Oct 09 03:58:29 localhost kernel: Hierarchical RCU implementation.
Oct 09 03:58:29 localhost kernel: RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=2.
Oct 09 03:58:29 localhost kernel: Experimental no-CBs for all CPUs
Oct 09 03:58:29 localhost kernel: Experimental no-CBs CPUs: 0-1.
Oct 09 03:58:29 localhost kernel: NR_IRQS:327936 nr_irqs:512 16
Oct 09 03:58:29 localhost kernel: Console: colour VGA+ 80x25
Oct 09 03:58:29 localhost kernel: console [tty0] enabled
Oct 09 03:58:29 localhost kernel: allocated 8388608 bytes of page_cgroup
Oct 09 03:58:29 localhost kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Oct 09 03:58:29 localhost kernel: tsc: Fast TSC calibration using PIT
Oct 09 03:58:29 localhost kernel: tsc: Detected 1666.404 MHz processor
Oct 09 03:58:29 localhost kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3332.80 BogoMIPS (lpj=1666404)
Oct 09 03:58:29 localhost kernel: pid_max: default: 32768 minimum: 301
Oct 09 03:58:29 localhost kernel: Security Framework initialized
Oct 09 03:58:29 localhost kernel: SELinux: Initializing.
Oct 09 03:58:29 localhost kernel: SELinux: Starting in permissive mode
Oct 09 03:58:29 localhost kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Oct 09 03:58:29 localhost kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 09 03:58:29 localhost kernel: Mount-cache hash table entries: 4096
Oct 09 03:58:29 localhost kernel: Initializing cgroup subsys memory
Oct 09 03:58:29 localhost kernel: Initializing cgroup subsys devices
Oct 09 03:58:29 localhost kernel: Initializing cgroup subsys freezer
Oct 09 03:58:29 localhost kernel: Initializing cgroup subsys net_cls
Oct 09 03:58:29 localhost kernel: Initializing cgroup subsys blkio
Oct 09 03:58:29 localhost kernel: Initializing cgroup subsys perf_event
Oct 09 03:58:29 localhost kernel: Initializing cgroup subsys hugetlb
Oct 09 03:58:29 localhost kernel: CPU: Physical Processor ID: 0
Oct 09 03:58:29 localhost kernel: CPU: Processor Core ID: 0
Oct 09 03:58:29 localhost kernel: mce: CPU supports 5 MCE banks
Oct 09 03:58:29 localhost kernel: CPU0: Thermal monitoring handled by SMI
Oct 09 03:58:29 localhost kernel: Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
tlb_flushall_shift: 6
Oct 09 03:58:29 localhost kernel: Freeing SMP alternatives: 24k freed
Oct 09 03:58:29 localhost kernel: ACPI: Core revision 20130517
Oct 09 03:58:29 localhost kernel: ACPI: All ACPI Tables successfully acquired
Oct 09 03:58:29 localhost kernel: ftrace: allocating 23383 entries in 92 pages
Oct 09 03:58:29 localhost kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 09 03:58:29 localhost kernel: smpboot: CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz (fam: 06, model: 1c, stepping: 0a)
Oct 09 03:58:29 localhost kernel: Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
Oct 09 03:58:29 localhost kernel: ... version: 3
Oct 09 03:58:29 localhost kernel: ... bit width: 40
Oct 09 03:58:29 localhost kernel: ... generic registers: 2
Oct 09 03:58:29 localhost kernel: ... value mask: 000000ffffffffff
Oct 09 03:58:29 localhost kernel: ... max period: 000000007fffffff
Oct 09 03:58:29 localhost kernel: ... fixed-purpose events: 3
Oct 09 03:58:29 localhost kernel: ... event mask: 0000000700000003
Oct 09 03:58:29 localhost kernel: smpboot: Booting Node 0, Processors #1 OK
Oct 09 03:58:29 localhost kernel: CPU0: Thermal monitoring enabled (TM1)
Oct 09 03:58:29 localhost kernel: Brought up 2 CPUs
Oct 09 03:58:29 localhost kernel: smpboot: Total of 2 processors activated (6665.61 BogoMIPS)
Oct 09 03:58:29 localhost kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Oct 09 03:58:29 localhost kernel: devtmpfs: initialized
Oct 09 03:58:29 localhost kernel: EVM: security.selinux
Oct 09 03:58:29 localhost kernel: EVM: security.ima
Oct 09 03:58:29 localhost kernel: EVM: security.capability
Oct 09 03:58:29 localhost kernel: PM: Registering ACPI NVS region [mem 0x7f5e0000-0x7f5e2fff](12288 bytes)
Oct 09 03:58:29 localhost kernel: atomic64 test passed for x86-64 platform with CX8 and with SSE
Oct 09 03:58:29 localhost kernel: NET: Registered protocol family 16
Oct 09 03:58:29 localhost kernel: ACPI: bus type PCI registered
Oct 09 03:58:29 localhost kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Oct 09 03:58:29 localhost kernel: PCI: Using configuration type 1 for base access
Oct 09 03:58:29 localhost kernel: bio: create slab
Oct 09 03:58:29 localhost kernel: ACPI: Invalid active0 threshold
Oct 09 03:58:29 localhost kernel: thermal LNXTHERM:00: registered as thermal_zone0
Oct 09 03:58:29 localhost kernel: ACPI: Thermal Zone [TZ01](27 C)
Oct 09 03:58:29 localhost kernel: GHES: HEST is not enabled!
Oct 09 03:58:29 localhost kernel: ACPI: Battery Slot [BAT1](battery absent)
Oct 09 03:58:29 localhost kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Oct 09 03:58:29 localhost kernel: Non-volatile memory driver v1.3
Oct 09 03:58:29 localhost kernel: Linux agpgart interface v0.103
Oct 09 03:58:29 localhost kernel: agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
Oct 09 03:58:29 localhost kernel: agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
Oct 09 03:58:29 localhost kernel: agpgart-intel 0000:00:00.0: detected 8192K stolen memory
Oct 09 03:58:29 localhost kernel: agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Oct 09 03:58:29 localhost kernel: crash memory driver: version 1.1
Oct 09 03:58:29 localhost kernel: rdac: device handler registered
Oct 09 03:58:29 localhost kernel: hp_sw: device handler registered
Oct 09 03:58:29 localhost kernel: emc: device handler registered
Oct 09 03:58:29 localhost kernel: alua: device handler registered
Oct 09 03:58:29 localhost kernel: libphy: Fixed MDIO Bus: probed
Oct 09 03:58:29 localhost kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 09 03:58:29 localhost kernel: ehci-pci: EHCI PCI platform driver
Oct 09 03:58:29 localhost kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
Oct 09 03:58:29 localhost kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
Oct 09 03:58:29 localhost kernel: ehci-pci 0000:00:1d.7: debug port 1
Oct 09 03:58:29 localhost kernel: ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
Oct 09 03:58:29 localhost kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0x80f04000
Oct 09 03:58:29 localhost kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Oct 09 03:58:29 localhost kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Oct 09 03:58:29 localhost kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 09 03:58:29 localhost kernel: usb usb1: Product: EHCI Host Controller
Oct 09 03:58:29 localhost kernel: usb usb1: Manufacturer: Linux 3.10.0-123.el7.x86_64 ehci_hcd
Oct 09 03:58:29 localhost kernel: usb usb1: SerialNumber: 0000:00:1d.7
Oct 09 03:58:29 localhost kernel: hub 1-0:1.0: USB hub found
Oct 09 03:58:29 localhost kernel: hub 1-0:1.0: 8 ports detected
Oct 09 03:58:29 localhost kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 09 03:58:29 localhost kernel: ohci-pci: OHCI PCI platform driver
Oct 09 03:58:29 localhost kernel: uhci_hcd: USB Universal Host Controller Interface driver
Oct 09 03:58:29 localhost kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct 09 03:58:29 localhost kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Oct 09 03:58:29 localhost kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
Oct 09 03:58:29 localhost kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Oct 09 03:58:29 localhost kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 09 03:58:29 localhost kernel: usb usb2: Product: UHCI Host Controller
Oct 09 03:58:29 localhost kernel: usb usb2: Manufacturer: Linux 3.10.0-123.el7.x86_64 uhci_hcd
Oct 09 03:58:29 localhost kernel: usb usb2: SerialNumber: 0000:00:1d.0
Oct 09 03:58:29 localhost kernel: hub 2-0:1.0: USB hub found
Oct 09 03:58:29 localhost kernel: hub 2-0:1.0: 2 ports detected
Oct 09 03:58:29 localhost kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct 09 03:58:29 localhost kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Oct 09 03:58:29 localhost kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
Oct 09 03:58:29 localhost kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Oct 09 03:58:29 localhost kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 09 03:58:29 localhost kernel: usb usb3: Product: UHCI Host Controller
Oct 09 03:58:29 localhost kernel: usb usb3: Manufacturer: Linux 3.10.0-123.el7.x86_64 uhci_hcd
Oct 09 03:58:29 localhost kernel: usb usb3: SerialNumber: 0000:00:1d.1
Oct 09 03:58:29 localhost kernel: hub 3-0:1.0: USB hub found
Oct 09 03:58:29 localhost kernel: hub 3-0:1.0: 2 ports detected
Oct 09 03:58:29 localhost kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Oct 09 03:58:29 localhost kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Oct 09 03:58:29 localhost kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
Oct 09 03:58:29 localhost kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Oct 09 03:58:29 localhost kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 09 03:58:29 localhost kernel: usb usb4: Product: UHCI Host Controller
Oct 09 03:58:29 localhost kernel: usb usb4: Manufacturer: Linux 3.10.0-123.el7.x86_64 uhci_hcd
Oct 09 03:58:29 localhost kernel: usb usb4: SerialNumber: 0000:00:1d.2
Oct 09 03:58:29 localhost kernel: hub 4-0:1.0: USB hub found
Oct 09 03:58:29 localhost kernel: hub 4-0:1.0: 2 ports detected
Oct 09 03:58:29 localhost kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Oct 09 03:58:29 localhost kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Oct 09 03:58:29 localhost kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
Oct 09 03:58:29 localhost kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Oct 09 03:58:29 localhost kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 09 03:58:29 localhost kernel: usb usb5: Product: UHCI Host Controller
Oct 09 03:58:29 localhost kernel: usb usb5: Manufacturer: Linux 3.10.0-123.el7.x86_64 uhci_hcd
Oct 09 03:58:29 localhost kernel: usb usb5: SerialNumber: 0000:00:1d.3
Oct 09 03:58:29 localhost kernel: hub 5-0:1.0: USB hub found
Oct 09 03:58:29 localhost kernel: hub 5-0:1.0: 2 ports detected
Oct 09 03:58:29 localhost kernel: usbcore: registered new interface driver usbserial
Oct 09 03:58:29 localhost kernel: usbcore: registered new interface driver usbserial_generic
Oct 09 03:58:29 localhost kernel: usbserial: USB Serial support registered for generic
Oct 09 03:58:29 localhost kernel: i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
Oct 09 03:58:29 localhost kernel: i8042: Detected active multiplexing controller, rev 1.1
Oct 09 03:58:29 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 09 03:58:29 localhost kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
Oct 09 03:58:29 localhost kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
Oct 09 03:58:29 localhost kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
Oct 09 03:58:29 localhost kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
Oct 09 03:58:29 localhost kernel: mousedev: PS/2 mouse device common for all mice
Oct 09 03:58:29 localhost kernel: rtc_cmos 00:03: RTC can wake from S4
Oct 09 03:58:29 localhost kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Oct 09 03:58:29 localhost kernel: rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram
Oct 09 03:58:29 localhost kernel: cpuidle: using governor menu
Oct 09 03:58:29 localhost kernel: hidraw: raw HID events driver (C) Jiri Kosina
Oct 09 03:58:29 localhost kernel: usbcore: registered new interface driver usbhid
Oct 09 03:58:29 localhost kernel: usbhid: USB HID core driver
Oct 09 03:58:29 localhost kernel: drop_monitor: Initializing network drop monitor service
Oct 09 03:58:29 localhost kernel: TCP: cubic registered
Oct 09 03:58:29 localhost kernel: Initializing XFRM netlink socket
Oct 09 03:58:29 localhost kernel: NET: Registered protocol family 10
Oct 09 03:58:29 localhost kernel: NET: Registered protocol family 17
Oct 09 03:58:29 localhost kernel: Loading compiled-in X.509 certificates
Oct 09 03:58:29 localhost kernel: Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Oct 09 03:58:29 localhost kernel: Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Oct 09 03:58:29 localhost kernel: Loaded X.509 cert 'CentOS Linux kernel signing key: bc83d0fe70c62fab1c58b4ebaa95e3936128fcf4'
Oct 09 03:58:29 localhost kernel: registered taskstats version 1
Oct 09 03:58:29 localhost kernel: Key type trusted registered
Oct 09 03:58:29 localhost kernel: Key type encrypted registered
Oct 09 03:58:29 localhost kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Oct 09 03:58:29 localhost kernel: IMA: No TPM chip found, activating TPM-bypass!
Oct 09 03:58:29 localhost kernel: rtc_cmos 00:03: setting system clock to 2014-10-09 03:58:29 UTC (1412827109)
Oct 09 03:58:29 localhost kernel: Freeing unused kernel memory: 1584k freed
Oct 09 03:58:29 localhost systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
Oct 09 03:58:29 localhost systemd[1]: Running in initial RAM disk.
Oct 09 03:58:29 localhost systemd[1]: No hostname configured.
Oct 09 03:58:29 localhost systemd[1]: Set hostname to
Oct 09 03:58:30 localhost kernel: usb 1-6: Manufacturer: ENE Flash
Oct 09 03:58:30 localhost kernel: usb 1-6: SerialNumber: 606569746801
Oct 09 03:58:30 localhost dracut-cmdline[82]: rd.luks=0: removing cryptoluks activation
Oct 09 03:58:30 localhost dracut-cmdline[82]: rd.lvm=0: removing LVM activation
Oct 09 03:58:30 localhost systemd[1]: Started dracut cmdline hook.
Oct 09 03:58:30 localhost systemd[1]: Starting dracut pre-udev hook...
Oct 09 03:58:30 localhost kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Oct 09 03:58:30 localhost kernel: Loading iSCSI transport class v2.0-870.
Oct 09 03:58:30 localhost kernel: iscsi: registered transport (tcp)
Oct 09 03:58:30 localhost kernel: usb 5-2: new full-speed USB device number 2 using uhci_hcd
Oct 09 03:58:31 localhost kernel: usb 5-2: New USB device found, idVendor=0cf3, idProduct=3000
Oct 09 03:58:31 localhost kernel: usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 09 03:58:33 localhost kernel: floppy0: no floppy controllers found
Oct 09 03:58:33 localhost kernel: No iBFT detected.
Oct 09 03:58:33 localhost kernel: md: raid0 personality registered for level 0
Oct 09 03:58:33 localhost kernel: md: raid1 personality registered for level 1
Oct 09 03:58:33 localhost kernel: async_tx: api initialized (async)
Oct 09 03:58:33 localhost kernel: xor: measuring software checksum speed
Oct 09 03:58:34 localhost kernel: prefetch64-sse: 5420.000 MB/sec
Oct 09 03:58:34 localhost kernel: generic_sse: 4940.000 MB/sec
Oct 09 03:58:34 localhost kernel: xor: using function: prefetch64-sse (5420.000 MB/sec)
Oct 09 03:58:34 localhost kernel: raid6: sse2x1 242 MB/s
Oct 09 03:58:34 localhost kernel: raid6: sse2x2 460 MB/s
Oct 09 03:58:34 localhost kernel: raid6: sse2x4 867 MB/s
Oct 09 03:58:34 localhost kernel: raid6: using algorithm sse2x4 (867 MB/s)
Oct 09 03:58:34 localhost kernel: raid6: using ssse3x2 recovery algorithm
Oct 09 03:58:34 localhost kernel: md: raid6 personality registered for level 6
Oct 09 03:58:34 localhost kernel: md: raid5 personality registered for level 5
Oct 09 03:58:34 localhost kernel: md: raid4 personality registered for level 4
Oct 09 03:58:34 localhost kernel: md: raid10 personality registered for level 10
Oct 09 03:58:34 localhost kernel: md: linear personality registered for level -1
Oct 09 03:58:34 localhost kernel: device-mapper: multipath round-robin: version 1.0.0 loaded
Oct 09 03:58:34 localhost kernel: sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
Oct 09 03:58:34 localhost kernel: RPC: Registered named UNIX socket transport module.
Oct 09 03:58:34 localhost kernel: RPC: Registered udp transport module.
Oct 09 03:58:34 localhost kernel: RPC: Registered tcp transport module.
Oct 09 03:58:34 localhost kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 09 03:58:34 localhost rpc.statd[405]: Version 1.3.0 starting
Oct 09 03:58:34 localhost rpc.statd[405]: Initializing NSM state
Oct 09 03:58:34 localhost rpc.statd[405]: Running as root. chown /var/lib/nfs/statd to choose different user
Oct 09 03:58:34 localhost systemd[1]: Started dracut pre-udev hook.
Oct 09 03:58:34 localhost systemd[1]: Starting udev Kernel Device Manager...
Oct 09 03:58:34 localhost systemd-udevd[432]: starting version 208
Oct 09 03:58:34 localhost systemd[1]: Started udev Kernel Device Manager.
Oct 09 03:58:34 localhost systemd[1]: Starting dracut pre-trigger hook...
Oct 09 03:58:34 localhost kernel: usb-storage 1-3:1.0: USB Mass Storage device detected
Oct 09 03:58:34 localhost kernel: scsi0 : usb-storage 1-3:1.0
Oct 09 03:58:34 localhost kernel: usb-storage 1-6:1.0: USB Mass Storage device detected
Oct 09 03:58:34 localhost kernel: scsi1 : usb-storage 1-6:1.0
Oct 09 03:58:34 localhost kernel: usbcore: registered new interface driver usb-storage
Oct 09 03:58:34 localhost dracut-pre-trigger[433]: rd.dm=0: removing DM RAID activation
Oct 09 03:58:34 localhost dracut-pre-trigger[433]: rd.md.imsm=0: no MD RAID for imsm/isw raids
Oct 09 03:58:34 localhost dracut-pre-trigger[433]: rd.md.ddf=0: no MD RAID for SNIA ddf raids
Oct 09 03:58:34 localhost dracut-pre-trigger[433]: rd.md=0: removing MD RAID activation
Oct 09 03:58:35 localhost kernel: [drm] Initialized drm 1.1.0 20060810
Oct 09 03:58:35 localhost kernel: wmi: Mapper loaded
Oct 09 03:58:35 localhost kernel: [drm] Memory usable by graphics device = 512M
Oct 09 03:58:35 localhost kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Oct 09 03:58:35 localhost kernel: r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
Oct 09 03:58:35 localhost kernel: r8169 0000:05:00.0: irq 40 for MSI/MSI-X
Oct 09 03:58:35 localhost kernel: r8169 0000:05:00.0 eth0: RTL8102e at 0xffffc90000310000, 00:25:09:03:91:ca, XID 04c00000 IRQ 40
Oct 09 03:58:35 localhost kernel: i915 0000:00:02.0: irq 41 for MSI/MSI-X
Oct 09 03:58:35 localhost kernel: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Oct 09 03:58:35 localhost kernel: [drm] Driver supports precise vblank timestamp query.
Oct 09 03:58:35 localhost kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Oct 09 03:58:35 localhost kernel: [drm] initialized overlay support
Oct 09 03:58:35 localhost kernel: ACPI: bus type ATA registered
Oct 09 03:58:35 localhost kernel: libata version 3.00 loaded.
Oct 09 03:58:35 localhost multipathd[144]: path checkers start up
Oct 09 03:58:35 localhost multipathd[144]: sdb: add path (uevent)
Oct 09 03:58:35 localhost multipathd[144]: sdb: failed to g
Dang! Most of the error messages were eliminated from the previous post. Here they are again. Oct 09 03:58:35 localhost multipathd[144]: path checkers start up
Oct 09 03:58:35 localhost multipathd[144]: sdb: failed to get path uid
Oct 09 03:58:35 localhost multipathd[144]: sda: add path (uevent) Oct 09 03:58:35 localhost kernel: fbcon: inteldrmfb (fb0) is primary device Oct 09 03:58:35 localhost systemd-udevd[511]: renamed network interface eth0 to enp5s0 Oct 09 03:58:35 localhost kernel: scsi 0:0:0:0: Direct-Access Flash 2.0 Disk 5.00 PQ: 0 ANSI: 2 Oct 09 03:58:35 localhost kernel: scsi 1:0:0:0: Direct-Access USB2.0 CardReader COMBO 0100 PQ: 0 ANSI: 0 Oct 09 03:58:35 localhost kernel: sd 0:0:0:0: [sda] 2062336 512-byte logical blocks: (1.05 GB/1007 MiB) Oct 09 03:58:35 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off Oct 09 03:58:35 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
Oct 09 03:58:35 localhost kernel: sd 0:0:0:0: [sda] No Caching mode page found
Oct 09 03:58:35 localhost kernel: sd 1:0:0:0: [sdb] Attached SCSI removable disk
Oct 09 03:58:35 localhost kernel: sd 0:0:0:0: [sda] No Caching mode page found
Oct 09 03:58:35 localhost kernel: sda: sda1
Oct 09 03:58:35 localhost kernel: sd 0:0:0:0: [sda] No Caching mode page found
Oct 09 03:58:35 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk Oct 09 03:58:35 localhost kernel: Console: switching to colour frame buffer device 128x37 Oct 09 03:58:35 localhost kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device Oct 09 03:58:35 localhost kernel: i915 0000:00:02.0: registered panic notifier Oct 09 03:58:35 localhost kernel: acpi device:04: registered as cooling_device2 Oct 09 03:58:35 localhost kernel: ACPI: Video Device [GFX0](multi-head: yes rom: no post: no) Oct 09 03:58:35 localhost kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 Oct 09 03:58:35 localhost kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Oct 09 03:58:35 localhost kernel: ata_piix 0000:00:1f.2: version 2.13 Oct 09 03:58:35 localhost kernel: ata_piix 0000:00:1f.2: MAP [ Oct 09 03:58:35 localhost kernel: P0 P2 P1 P3 ] Oct 09 03:58:36 localhost kernel: scsi2 : ata_piix Oct 09 03:58:36 localhost kernel: scsi3 : ata_piix Oct 09 03:58:36 localhost kernel: ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14 Oct 09 03:58:36 localhost kernel: ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15 Oct 09 03:58:36 localhost kernel: ata1.00: ATA-8: ST320LT023-1AF142, 0001SDM1, max UDMA/133 Oct 09 03:58:36 localhost kernel: ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) Oct 09 03:58:36 localhost kernel: ata1.00: configured for UDMA/133 Oct 09 03:58:36 localhost kernel: scsi 2:0:0:0: Direct-Access ATA ST320LT023-1AF14 0001 PQ: 0 ANSI: 5 Oct 09 03:58:36 localhost kernel: sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) Oct 09 03:58:36 localhost kernel: sd 2:0:0:0: [sdc] 4096-byte physical blocks Oct 09 03:58:36 localhost kernel: sd 2:0:0:0: [sdc] Write Protect is off Oct 09 03:58:36 localhost kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Oct 09 03:58:36 localhost kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 09 03:58:36 localhost kernel: sdc: sdc1 sdc2 sdc3 Oct 09 03:58:36 localhost kernel: sd 2:0:0:0: [sdc] Attached SCSI disk Oct 09 03:58:36 localhost multipathd[144]: sdc: add path (uevent) Oct 09 03:58:37 localhost systemd[1]: Started dracut pre-trigger hook. Oct 09 03:58:37 localhost systemd[1]: Starting udev Coldplug all Devices... Oct 09 03:58:37 localhost systemd[1]: Started udev Coldplug all Devices. Oct 09 03:58:37 localhost systemd[1]: Starting dracut initqueue hook... Oct 09 03:58:37 localhost systemd[1]: Starting System Initialization. Oct 09 03:58:37 localhost systemd[1]: Reached target System Initialization. Oct 09 03:58:37 localhost systemd[1]: Starting Show Plymouth Boot Screen... Oct 09 03:58:37 localhost systemd[1]: Mounting Configuration File System... Oct 09 03:58:37 localhost systemd[1]: Mounted Configuration File System. Oct 09 03:58:37 localhost systemd[1]: Started Show Plymouth Boot Screen. Oct 09 03:58:37 localhost systemd[1]: Started Dispatch Password Requests to Console Directory Watch. Oct 09 03:58:37 localhost systemd[1]: Starting Paths. Oct 09 03:58:37 localhost systemd[1]: Reached target Paths. Oct 09 03:58:37 localhost systemd[1]: Starting Forward Password Requests to Plymouth Directory Watch. Oct 09 03:58:37 localhost systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. Oct 09 03:58:37 localhost systemd[1]: Starting Basic System. Oct 09 03:58:37 localhost systemd[1]: Reached target Basic System. Oct 09 03:58:37 localhost systemd[1]: Reloading. Oct 09 03:58:37 localhost multipathd[144]: sdb: add path (uevent)
Oct 09 03:58:37 localhost multipathd[144]: sdb: spurious uevent, path already in pathvec Oct 09 03:58:37 localhost multipathd[144]: sdb: failed to get path uid
Oct 09 03:58:37 localhost multipathd[144]: sdc: add path (uevent)
Oct 09 03:58:37 localhost multipathd[144]: sda: add path (uevent)
Oct 09 04:01:51 localhost dracut-initqueue[567]: Warning: Could not boot. Oct 09 04:01:51 localhost dracut-initqueue[567]: Warning: /dev/root does not exist Oct 09 04:01:51 localhost systemd[1]: Starting Dracut Emergency Shell...
Well, if the CentOS process relies on unique IDs, then it wasn't designed in a generic way and using a tool like Rufus will not work with it outside of image mode. Unfortunately, this looks like a pure CentOS issue - If they decided to lock their installation process, they will also have to be the one to make it generic.
I'll be closing this issue then.
Reopening this issue, as I believe the fix for #394 should also make CentOS 7.0 work.
There is a BETA for 1.4.12 now available here that should fix this problem. Please test and feel free to reopen the issue if that is not the case.
Thank you. I'll test it in the next 24 hours. MJR.
This thread has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue if you think you have a related problem or query.
I've used rufus successfully in the past to create bootable usbs. Creating a bootable usb for Centos-7.0-1406-x86_64-Minimal.iso works but the usb gives the following message on boot: SYSLINUX 4.07 blah, blah, blah Unknown keyboard in configuration file: U?U? No DEFAULT or UI configuration directive found! boot:
I created the usb with only one box ticked - Create a bootable usb with ISO image. rawrite creates a bootable usb for Centos7 Minimal install and it works, so the issue is not the contents of the source iso file.