ipega 9023 and x360ce

[GoogleCodeExporter]

Steps will reproduce the problem?
1. configure x360ce with and ipega 9023 (bluetooth gamepad with directinput 
only support)
2. the gamepad is immediatly recognized, and all the buttons are mapped 
correctly
3. the R2 button behave in x360ce or in XinputTest, as always in use. Sometimes 
it happens also with L2 button

What is the expected output? What do you see instead?
The R2 (or L2) should work only when pressed/used. Please note, that the 
controller buttons, works as exptected in directinput mode. I've checked it 
trough the control panel of windows

What versions of x360ce and Windows are you using?
latest version (64bit) of x360ce and windows 8.1

What gamepad do you use? On what drivers version?
ipega 9023, with standard drivers from windows 8 itself

Please attach a log file created with Log=1 setting in x360ce.ini file.
(LOG MUST BE FROM THE GAME, NOT X360CE)
There is no need, since the problem happen already when running the x360ce.exe

Please let me know, any help would be greatly appreciated!

Original issue reported on code.google.com by lorenzo....@gmail.com on 18 Dec 2014 at 9:40

[GoogleCodeExporter]

try this

Original comment by danialho...@gmail.com on 18 Dec 2014 at 12:03

Attachments:

• xinput1_3.dll

[GoogleCodeExporter]

Hello,

with this dll I get a red square ;(

Original comment by lorenzo....@gmail.com on 18 Dec 2014 at 7:04

[GoogleCodeExporter]

yes. because its x64 only, app is x86 only.

test in game.

Original comment by danialho...@gmail.com on 19 Dec 2014 at 4:19

[GoogleCodeExporter]

Most game are x86 only. I will look if there is something that is running on 64 
bit and I will test it. Unluckily the xinputtest.exe looks like to be 32 bit as 
well.

Original comment by lorenzo....@gmail.com on 19 Dec 2014 at 1:41

[GoogleCodeExporter]

This dll should suit you better.

Original comment by danialho...@gmail.com on 20 Dec 2014 at 4:38

Attachments:

• xinput1_3.dll

[GoogleCodeExporter]

Hello,

I've tryed this dll but I get the error:

"an unhandled exception has occurred in your application. if you click Continue 
the application will ignore this error and attempt to continue. If you click 
Quit the application will be shut down immediatly.

Unable to load DLL (xinput1_3.dll)."

Original comment by lorenzo....@gmail.com on 20 Dec 2014 at 6:08

[GoogleCodeExporter]

you need to install the visual studio runtime that matches that dll.

should be visual c++ 2010 sp1 redist x86

Original comment by danialho...@gmail.com on 28 Dec 2014 at 10:28

[GoogleCodeExporter]

I also have this problem. I tried the .dll posted on december 19: it fixes the 
RT always-on issue, but it stops detection of LT button presses.

Also, the RT issue did not happen to me while playing escape goat 2 on steam, 
although in x360ce it showed the key as always on.

Thank you for your help!

Original comment by ettore.g...@gmail.com on 3 Jan 2015 at 9:37

[GoogleCodeExporter]

Hello,

I have the exact same problem.

So close to make it 100% working.

As ettore said, the last .dll fixes the RT always-on issue.

But, LT is not detected and RT is detected as LT :)

Thank you again for your help !

Julien

Original comment by julien.n...@gmail.com on 28 Jan 2015 at 8:43

[GoogleCodeExporter]

up :) ?

Original comment by julien.n...@gmail.com on 1 Feb 2015 at 9:54

[GoogleCodeExporter]

Up ?

Anybody ?

Original comment by julien.n...@gmail.com on 7 Feb 2015 at 8:34

[GoogleCodeExporter]

In case of PG-9028, I've tried these settings. It resolves magically.

Left trigger - Button 7
Left Bumper - Button 9
Right trigger - Button 8
Right Bumper - Button 10

Original comment by picciol...@gmail.com on 9 Apr 2015 at 4:26