Adapt to "Dyson Purifier Humidify + Cool Formaldehyde Humidifier White / Gold"

gitmors commented 2 years ago

Hi there,

I have a new dyson "Dyson Purifier Humidify + Cool Formaldehyde Humidifier White / Gold" device. Would it be possible to adapt the program to this device? Unfortunately, I can't even turn it off and on. The temperature can be read out and the rotation can also be switched on and off.

setRotation and get rotation are also possible.

I once did a trace with wireshark and with it I got the following read out. There are two MQTT packages returned:

M9F-EU-serialnumber/status/current{"msg":"CURRENT-STATE","time":"2021-12-08T12:05:57.000Z","mode-reason":"PRC","state-reason":"MODE","rssi":"-52","channel":"5","fqhp":"104144","fghp":"72848","product-state":{"fpwr":"ON","auto":"OFF","oscs":"ON","oson":"ON","nmod":"OFF","rhtm":"OFF","fnst":"FAN","ercd":"NONE","wacd":"NONE","nmdv":"0004","fnsp":"0001","bril":"0002","corf":"ON","cflr":"INV","hflr":"0099","cflt":"SCOF","hflt":"GCOM","sltm":"OFF","osal":"0189","osau":"0189","ancp":"0090","hume":"HUMD","haut":"ON","humt":"0070","rect":"0045","msta":"OFF","clcr":"CLNO","cdrr":"0060","cltr":"0671","wath":"0675","psta":"OFF","fdir":"ON"},"scheduler":{"srsc":"0000000000000000","dstv":"0001","tzid":"0001"}}

+

M9F-EU-serialnumber/status/current{"msg":"ENVIRONMENTAL-CURRENT-SENSOR-DATA","time":"2021-12-08T12:05:57.000Z","data":{"tact":"2947","hact":"0049","pm25":"0000","pm10":"0000","va10":"0005","noxl":"0003","p25r":"0001","p10r":"0001","hcho":"0004","hchr":"0011","sltm":"OFF"}}

For on and off, for example, I think the command "fpwr" would have to be used instead of "fmod".

Unfortunately, the commands cannot be passed on 1: 1, so the program must be adapted.

The table from the ioBroker project seems to me to be quite complete.

Thank you very much for your help.

CURRENT-STATE

product-state

naimo84 commented 2 years ago

Hi @gitmors ,

v0.5.0 is on the way 😉 Due to the fact I don't own these two models, it's a very theoretically implementation 😉

Greets, Benjamin

gitmors commented 2 years ago

Hallo Benjamin,

ich sehe du kommt auch aus aus Bayern. Da könnte ich dir die Maschine ja fast vorbei fahren :). Super lieb dass du das hier bereitstellst. Wenn ich mit etwas behilflich sein kann, gib bitte bescheid, bin gerne bereit dazu, sollten noch Informationen abgehen.

Grüße, Moritz

naimo84 commented 2 years ago

Hallo Moritz,

ja München-->Regensburg wäre gar nicht soo weit :)

https://flows.nodered.org/node/node-red-contrib-dyson-purelink ist aktualisiert und meine NodeRED Instanzen melden auch, dass ein Update verfügbar ist. Wenn du also mal testen magst?

Aktuell hab ich alle Infos, denke ich. Danke 👍

Grüße, Benjamin

github-actions[bot] commented 2 years ago

This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 5 days.

pbrunier / node-red-contrib-dyson-purelink

Adapt to "Dyson Purifier Humidify + Cool Formaldehyde Humidifier White / Gold" #39

CURRENT-STATE

product-state