Closed hamgeek73 closed 2 months ago
Make sure to delete any existing wfpiconsole.ini
file. Then start the console with wfpiconsole start
. You will be asked whether you want to install a minimal configuration file for demonstration purposes. Answer n
to this question. Then you will be taken through the setup and asked to enter your API keys and station details.
You will need your WeatherFlow Key and a CheckWX key (not a Weather Underground key). Please read the GitHub README
which points you in the direction of the information you need.
Thank you That was the trick.
Ed Wiest
@.> @.
614-284-1101
From: Pete Davis @.> Sent: Wednesday, June 19, 2024 1:24 AM To: peted-davis/WeatherFlow_PiConsole @.> Cc: hamgeek73 @.>; Author @.> Subject: Re: [peted-davis/WeatherFlow_PiConsole] Configuration (Issue #148)
Make sure to delete any existing wfpiconsole.ini file. Then start the console with wfpiconsole start. You will be asked whether you want to install a minimal configuration file for demonstration purposes. Answer n to this question. Then you will be taken through the setup and asked to enter your API keys and station details.
You will need your WeatherFlow Key and a CheckWX key (not a Weather Underground key). Please read the GitHub README which points you in the direction of the information you need.
— Reply to this email directly, view it on GitHub https://github.com/peted-davis/WeatherFlow_PiConsole/issues/148#issuecomment-2177772031 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AN36G3RUKIF3TUD7IV65FELZIEIYBAVCNFSM6AAAAABJRESVIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNZXG43TEMBTGE . You are receiving this because you authored the thread. https://github.com/notifications/beacon/AN36G3QVKPIHQGCMCDC7VGTZIEIYBA5CNFSM6AAAAABJRESVIOWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTUBZYU76.gif Message ID: @. @.> >
Thanks for last fix, now having configuration issues.. Not getting the prompt to enter the tempest or weather underground keys I entered them manually in the wpficonsole.ini along with serial number and station id. Attached are the errors I'm getting. Error reads like it is the station ID should be an integer and it is.
wfpiconsole.log