search

petretiandrea / home-assistant-tapo-p100

A custom integration to control Tapo devices from home assistant.
MIT License
820 stars 102 forks source link

L530 Controls are unreliable since the last few updates #227

Closed dragosdmc closed 2 years ago

dragosdmc commented 2 years ago

Hello,

Since the last few months the controls don't work properly for L530 lights in the sense that: -lights stopped gradually turning on. They turn on instantly with a bit of delay -color changing crashes stops the connection if you want to cycle through colors. After a few cycles, the bulb loses connection and starts doing a rainbow effect -what bothers me the most: I have a script that lights up my 3 bulbs, consecutively, to 3 different colors at about 15% intensity. Since updating HA, when running the script the colors change correctly, however a flash occurs before reaching the correct status. It seems like it first tries to reach it's default state, then change to the color from the script a few milliseconds later

I run HA 2022.8.x, just updated from 2022.2.x. Things where running fine on 2022.2.x. I also updated the firmware from the tapo app to 1.2.2 build 20220110 Rel.72329 and the Tapo integration for HACS running 1.2.14 with HACS version 1.26.2. I should mention that this has happened for a while, this is the reason why I used HA v2022.2.x

Thank you!

petretiandrea commented 2 years ago

I need some logs

dragosdmc commented 1 year ago

Hello. First of all sorry for the late response. Below you can find some logs. I have turned on and off the light 2 times using a standard button, then I ran a script that automatically turns on the light to a color/brightness that I set.

home-assistant_tapo_2022-12-19T22-57-33.470Z.log