Closed jombothegoodcat closed 3 days ago
It's understandable why the temperature went so low because of the ideal gas law, but the 30 x 10^36 C temperature when heating is a bit ludicrous? I'm not a professional by any means, but sure the temperature will go up quickly when there's so little to heat but I don't think it should be that high.
Also I found a way to accomplish what you're looking for but I do have the vat explosion setting in destroy disabled. (the pressure did say -101kPa so anything other than glass should work?) Just make a vat and cool it enough so that all the gas in the vat condenses and fill ~25 test tubes to remove everything but you'll have to add something with a test tube to get the vat working again
Looks like issue #240 is still present
Also here is a clip of the moment that it blew up, audio removed due to it being too loud: https://medal.tv/games/minecraft/clips/i1ZJHJ85txiDdkW3c/d1337CeFyUkI?invite=cr-MSxoZVksMTg4ODg3ODM4LA
I'm going to mark as a duplicate of #240
I was using the destroy mod and I was trying to completely empty a vat for some other stuff, first emptying through a mechanical pump went well before temperature dropped to below -200 C, so I put 4 blaze burners and the temperature proceeded to exponentially increase very rapidly and wouldn't stop, I did take this clip in the middle of that extravaganza: [https://medal.tv/games/minecraft/clips/i1ZCmqx8QAeb4keW4/d13371HJKKjm?invite=cr-MSxBRm4sMTg4ODg3ODM4LA]
The pressure was stuck at around -100.5k kPa but the vat did eventually blow up (unsure as to how), but not before reaching a bit above a whopping 30 x 10^36 C in its final moments, to replicate what I did:
fyi "coolguyOP" is my mc user and "jombothegoodcat" is my discord