Sometimes, brusher stops when using enhanced edges

pfjarschel / TaperPullingPro

Python package relevant to pulling optical fiber tapers.

0 stars 0 forks source link

Sometimes, brusher stops when using enhanced edges #43

Closed pfjarschel closed 1 week ago

pfjarschel commented 2 weeks ago

Consequence of #13 It was hard to get it working at all, but it still fails sometimes.

Check 27df290151928360a031c5b9c4482e31fbf882f8, 918aacf249fe3a0c7c9087217ec54bc6fc49088b and mainly c2158a2c280045e2a8bfeead9d5d1ab97d425b3c

pfjarschel commented 1 week ago

Everything indicates it was fixed by 1cf47bdc01fecfec983102e25d827939a1135b01 Could be a better solution, but it works.

pfjarschel commented 1 week ago

Tested more thoroughly on 2b936d35642ce7c098006c836fa57bea260e3470. Definitely OK! Adding some stress to the CPU (such as 4K streaming), made it easier to reproduce the issue, and confirm it was working.

The root cause could possibly be cpu load, should not be a problem on newer computers. (The test computer is from 2015 or something)