search

phdlee / uvk5cec

Adds various experimental features to the uvk5 radio
Apache License 2.0
306 stars 22 forks source link

APRS TX issues #10

Open mikhailsimon opened 7 months ago

mikhailsimon commented 7 months ago

My T.APRS all menus shows the frequency of 0.0000,is there any way to set it?

phdlee commented 7 months ago

Please check www.hamkskey.com.

You can save APRS-related frequencies in channels 169 and 170.

On Mon, Feb 5, 2024 at 6:11 PM mikhailsimon @.***> wrote:

My T.APRS all menus shows the frequency of 0.0000,is there any way to set it?

— Reply to this email directly, view it on GitHub https://github.com/phdlee/uvk5cec/issues/10, or unsubscribe https://github.com/notifications/unsubscribe-auth/AE4DZPBTOR7AMR2TXHESJVTYSCO5XAVCNFSM6AAAAABCZYJXJGVHI2DSMVQWIX3LMV43ASLTON2WKOZSGEYTQMBSHEYDONQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>

mikhailsimon commented 7 months ago

thanks! also what's APRSDST? is it optional or must fill? and yes..still...my local APRS Digipeater doesn't received my packet..

jangelor commented 7 months ago

Must fill APRSDST. It's the "tocall" setting. It need not be arbitrary, as it's an identifier of the device being used. Use "APZxxx" with "Z" denoting experimental device or software. xxx can be arbitrary. I use APZQSH (since quansheng) personally.

for DIGI, try WIDE1 with "1" for the digissid to make it WIDE1-1. This is for a fill-in digi.

Since there is no option for a second difgipath, perhaps you can try WIDE2-1 (WIDE2 and then a digissid of 1) hopeflly that gets your packet an additional hop when picked up.

Angelo DU2XXR https://aprsph.net

mikhailsimon commented 7 months ago

thanks,but have you tried it to a digipeater or iGate?If accepted,which one do you use? POS,GPS or MSG....or for this firmware release the parameter still isn't compatible with existing Digipeater/iGate?