Not working on newer kernels

[polymerchm]

running on raspberry pi

uname -a => Linux dawnlite 5.10.103-v7l+ #1529 SMP Tue Mar 8 12:24:00 GMT 2022 armv7l GNU/Linux runs just fine.

./airupnp-arm-static -Z -l 1000:2000 [14:23:18.305752] main:1420 Starting airupnp version: v0.2.51.2 (Nov 1 2021 @ 23:32:10) [14:23:18.306082] main:1428 no config file, using defaults [14:23:18.308868] Start:1130 Binding to 192.168.1.201:49152 [14:23:18.664532] AddMRDevice:1008 [0xb2ef1008]: adding renderer (Bedroom) . . .

running on a linux x86 box uname -a => Linux cp-server 5.13.0-37-generic #42~20.04.1-Ubuntu SMP Tue Mar 15 15:44:28 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux

/usr/bin$ ./airupnp-x86-static [14:31:59.382157] main:1420 Starting airupnp version: v0.2.51.2 (Nov 1 2021 @ 23:32:46) [14:31:59.382356] main:1428 no config file, using defaults [14:31:59.435171] Start:1130 Binding to 192.168.1.204:49152

and just hangs

same on a raspbery pi with newer kernel:

uname -a => Linux rpiaudio 5.15.30-v7+ #1536 SMP Mon Mar 28 13:43:34 BST 2022 armv7l GNU/Linux

/usr/local/bin $ ./aircast-arm-static -d all=debug [14:15:25.894910] main:974 Starting aircast version: v0.2.51.2 (Nov 1 2021 @ 23:30:44) [14:15:25.895367] main:982 no config file, using defaults [14:15:25.895572] Start:732 Binding to 192.168.1.214

note no port after ip address.

[polymerchm]

also tried it on a 5.10.69 kernel and no go. Thinking about building it.

[rp-preger]

Having same issue. Also thinking about building it. Lots of dependencies though?

[ChristianVermeulen]

Hi,

I have retired this mailbox so please stop sending email here. If you have good reason to contact me, you should be able to figure out an alternative way to get in touch ;-).

Kind regards, Christian Vermeulen