phy0 / autoddvpn

Automatically exported from code.google.com/p/autoddvpn
0 stars 0 forks source link

wndr3700 with dd-wrt cannot install autoddvpn #32

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
請描述一下您進行怎樣的操作之後碰到了問題
1. Both wget and jffs also cannot work fine.
2. For jffs, it is displayed 0KB in dd-wrt web management page when I enabled 
it. For my searching by google, it seems be canceled on the last dd-wrt img.
3. For wget, it can be download successfully, but after i restarted my router, 
all files are deleted :(.

你期待是怎樣的結果,然而卻出現了什麼情形?

請提供以下資訊:

1. 您的路由器型號:
2. 
DD-WRT版本:ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/10-26-10-r
15506/netgear-wndr3700/wndr3700-factory.img
3. 您的作業系統:windows 7 x64
4. 您的瀏覽器版本: google chrome 7
5. autoddvpn的運行模式(pptp+wget, pptp+jffs, 
openvpn+jffs等):pptp+wget/jffs
6. DD-WRT WAN口連線模式是 pptp or dhcp or static :dhcp(adsl)
7. 運行autoddvpn之後DD-WRT 的命令輸出 # route -n  | tail -n 20 :

如果方便的話,請參考這裡的說明,貼上autoddvpn.log內容
(說明:http://code.google.com/p/autoddvpn/wiki/DEBUG)

最後如果可能的話,請附上截屏或任何可能有幫助的夾檔

Original issue reported on code.google.com by f...@wqfw.de on 6 Nov 2010 at 7:06

GoogleCodeExporter commented 8 years ago
ddwrt in BrainSlayer version may have poor support in jffs but wget should work 
fine. All files downloaded in /tmp will be erased upon reboot.

I'll recommend not use BrainSlayer if possible. 

Original comment by pahud...@gmail.com on 6 Nov 2010 at 9:04

GoogleCodeExporter commented 8 years ago
I found the usb storage seems can mount with /jffs, can it works for autoddvpn?
Or, have others dd-wrt version support wndr3700?

thanks.

Original comment by f...@wqfw.de on 6 Nov 2010 at 9:11

GoogleCodeExporter commented 8 years ago
Yes, you can use router usb storage to use jffs+openvpn.

Original comment by jkgd...@gmail.com on 6 Nov 2010 at 11:49

GoogleCodeExporter commented 8 years ago
I have no experience about wndr3700 but you can always check the ddwrt router 
database on http://dd-wrt.com.  As I know some routers are not supported very 
well and they usually use BrainSlayer version of DDWRT, which is not 
recommended for the adoption of autoddvpn.

As for JFFS, please read this wiki first 
http://www.dd-wrt.com/wiki/index.php?title=JFFS_File_System&redirect=no . If 
you can mount it but can't write anything into /jffs I think it probably 
doesn't have good support on it.

If your router can't install the standard version or mini version of DDWRT I'll 
suggest you change another one, which will make your autoddvpn adoption easier.

Original comment by pahud...@gmail.com on 6 Nov 2010 at 2:47

GoogleCodeExporter commented 8 years ago
I have wndr3700 too, and I regret buying this router.
It has poor signal although it can simultaneously broadcast at 2.4G and 5G. In 
addition, I remember once I saw an article talking about its hardware issues 
that cannot be fixed by firmware.
I put a buffalo whr g300n v2 before it, and just use 3700 as an exchange.
I dont think it is worth the expense.

Original comment by xmuschna...@gmail.com on 26 Mar 2012 at 6:01

GoogleCodeExporter commented 8 years ago
3700可以改为D-LINK 825 B1固件,当然需要你要懂编程

Original comment by linjimmyiphone@gmail.com on 13 May 2012 at 11:33

GoogleCodeExporter commented 8 years ago
same issue here. jffs just did not work

Original comment by marstone...@gmail.com on 21 Sep 2012 at 4:40