search

pi-node / instructions

254 stars 154 forks source link

internet protocol ipv4 problem #5

Open DRahmouni opened 4 years ago

DRahmouni commented 4 years ago

when i change proprities (numbers) like the instructions on the pdf : steps how i did settings to open ports [https://drive.google.com/file/d/1wdyoxb3vNgyLmukztwQvcGyxcAhdm27P/view] of internet protocol ipv4 from ethernet on the network and sharing center my internet shuts off i need help tell me what id s to put in spaces.

DRahmouni commented 4 years ago

image

chipmoon27 commented 4 years ago

First step you need to do is go to start type cmd hit enter, then ipconfig enter again. This will give you current network adapter that’s connect to internet’s IPv4 IP address and default subnet and gateway to fill in this information. I recommend using what ever IP your router has already assigned your device example: 192.168.0.12, 255.255.255.0, 192.168.0.1

DRahmouni commented 4 years ago

and on the server DNS pref and server DNS aux what to write ? @chipmoon27

chipmoon27 commented 4 years ago

Leave those two blank allow router to choose

DRahmouni commented 4 years ago

image

DRahmouni commented 4 years ago

when i did change properties ipv4 internet goes off like i told you before any solution pls ?

chipmoon27 commented 4 years ago

Come find me on https://discord.gg/48DvkFy this way we can close this out for CT find me @RisingPhoenix

ihatejam commented 4 years ago

It is preferable to reserve the ip address (used in the port forward) for the node pc on the router to prevent the address from being assigned to a different device on the network in future. Setting a static ip address on the device itself (in ipv4 settings) could be detrimental -- for example, if this is a wifi adapter on a laptop, then setting a static ip address on the laptop's wifi config could stop it from working on other networks/subnets.