Closed maxlk96 closed 3 months ago
Yes, just manually add the call sign of the actual station that is controlling. As long as you are not connected as an observer it should work fine.
If it does not it might be because you would be using an obs frequency. I’ll check the code. In the meantime you can just create a fake frequency like 189.99 and prim that
On Fri, 19 Apr 2024 at 09:07, Max Larsson Kuhla @.***> wrote:
As a mentor it is normally not desired to activate prim freq, would there be any chance to enable transmitting on frequencies also without active prim freq when logged on as a controller facility?
— Reply to this email directly, view it on GitHub https://github.com/pierr3/TrackAudio/issues/5, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAN7UKZPJ2LGJGI55PBX7ZTY6E6LPAVCNFSM6AAAAABGPOJMUOVHI2DSMVQWIX3LMV43ASLTON2WKOZSGI2TGMZXGI3DENY . You are receiving this because you are subscribed to this thread.Message ID: @.***>
I was logged on as ESOS_M_CTR, adding ESOS_3_CTR in TrackAudio, the TX was greyed out untill I activated any prim freq in Euroscope.
I'm afraid for now, due to how AFV works with regards to detecting positions, you will need to set a frequency, any that is not the default observer frequency
In the AFV client your OBS position is shown as 199.998. You can then just add the the desired position, you are able to activate both RX and TX for that newly added position.
Yes, I know - I won’t be able to do it in the same manner with TrackAudio/VectorAudio, but could add a rule if you connect with a M callsign, would that work?
On Wed, 24 Apr 2024 at 04:24, Max Larsson Kuhla @.***> wrote:
In the AFV client your OBS position is shown as 199.998. You can then just add the the desired position, you are able to activate both RX and TX for that newly added position.
— Reply to this email directly, view it on GitHub https://github.com/pierr3/TrackAudio/issues/5#issuecomment-2074376596, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAN7UKY6TFCXV44AY53B6MLY65T43AVCNFSM6AAAAABGPOJMUOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZUGM3TMNJZGY . You are receiving this because you commented.Message ID: @.***>
That would definitely be of help. Thank you!
Still unable to activate TX on 1.0.2b2 Online as ESMM_M_CTR without primary freq and trying to activate ESMM_5_CTR in TrackAudio
Did you enable RX first ? The TX button will not be available until you click RX. I’ll take a look.
On Mon, 29 Apr 2024 at 12:44, Max Larsson Kuhla @.***> wrote:
Still unable to activate TX on 1.0.2b2 Online as ESMM_M_CTR without primary freq and trying to activate ESMM_5_CTR in TrackAudio
— Reply to this email directly, view it on GitHub https://github.com/pierr3/TrackAudio/issues/5#issuecomment-2083198789, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAN7UKZBSW3GDFDBJI7KVR3Y7Z2HPAVCNFSM6AAAAABGPOJMUOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOBTGE4TQNZYHE . You are receiving this because you modified the open/close state.Message ID: @.***>
Still having the same issue with 1.0.2b4 TX still remains greyed out after selecting RX.
Thanks, will take another look. In the meantime, set a fake frequency of 199.000 or so and it’ll work
On Fri, 17 May 2024 at 12:53, Max Larsson Kuhla @.***> wrote:
image.png (view on web) https://github.com/pierr3/TrackAudio/assets/25370081/27c89608-3faa-46b2-960b-9a51241b4925
Still having the same issue with 1.0.2b4 TX still remains greyed out after selecting RX.
— Reply to this email directly, view it on GitHub https://github.com/pierr3/TrackAudio/issues/5#issuecomment-2118003769, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAN7UKYCNWZMMMOU7ZVO56TZCYYXRAVCNFSM6AAAAABGPOJMUOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMJYGAYDGNZWHE . You are receiving this because you modified the open/close state.Message ID: @.***>
As a mentor it is normally not desired to activate prim freq, would there be any chance to enable transmitting on frequencies also without active prim freq when logged on as a controller facility?