Upload of my ASR file

[GraemeFlo]

Trying again for some help

DEN_GND - Copy.txt

[pierr3]

The first line of your ASR shows you have not read the wiki, your ASR starts with "DisplayTypeName:Standard SMR radar display" which is point number two on the relevant wiki page. Once again, this is a user error and does not fit within the community guidelines for issues on GitHub. Closing this once again.

[GraemeFlo]

I have removed the word standard thank you for pointing that out. I don’t doubt that it’s user error. Thank you. However I still see no traffic after making that change

On Thu, May 14, 2020 at 5:39 PM Pierre Ferran notifications@github.com wrote:

The first line of your ASR show you have not read the wiki, your ASR starts with "DisplayTypeName:Standard SMR radar display" which is point number two on the relevant wiki page https://github.com/pierr3/vSMR/wiki/Setting-up-the-ground-radar. Once again, this is a user error and does not fit within the community guidelines for issues on GitHub. Closing this once again.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/pierr3/vSMR/issues/73#issuecomment-628941770, or unsubscribe https://github.com/notifications/unsubscribe-auth/APSELJS4XCRYOZTER3ZSNPLRRR6J3ANCNFSM4NBDP4RQ .

-- Sent from Gmail Mobile

[kusterjs]

@GraemeFlo This platform is to track software issues. This is NOT a support platform. Please use the VATSIM forum or any other appropriate forum to seek for help regarding the setup of vSMR.

[GraemeFlo]

What forum do you suggest?

On Thu, May 14, 2020 at 5:50 PM kusterjs notifications@github.com wrote:

@GraemeFlo https://github.com/GraemeFlo This platform is to track software issues. This is NOT a support platform. Please use the VATSIM forum or any other appropriate forum to seek for help regarding the setup of vSMR.

— You are receiving this because you were mentioned.

Reply to this email directly, view it on GitHub https://github.com/pierr3/vSMR/issues/73#issuecomment-628944777, or unsubscribe https://github.com/notifications/unsubscribe-auth/APSELJSA2KN4HLW5HBXIKCLRRR7SVANCNFSM4NBDP4RQ .

-- Sent from Gmail Mobile

[kusterjs]

Didn't I just mention

VATSIM forum

?

[GraemeFlo]

thanks i guess

On Thu, May 14, 2020 at 5:58 PM kusterjs notifications@github.com wrote:

Didn't I just mention

VATSIM forum

?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/pierr3/vSMR/issues/73#issuecomment-628946962, or unsubscribe https://github.com/notifications/unsubscribe-auth/APSELJTOCZURXCPFRUSJKV3RRSAR7ANCNFSM4NBDP4RQ .

[GraemeFlo]

I just spend 30 mins on a screen-share with Andres Fuchs. He also was unable to see traffic on the ground with the plugin installed correctly on his end. Is there potentially a problem with a setting in the sector file that is not compatible compared to the European files. I downloaded EDDf and was able to get it to work.

[eliuuk]

@GraemeFlo Denver is at an elevation of 5000ft so you'll need to change the altitude filter in the vSMR config file. See #65 :)

[GraemeFlo]

Still nothing i cant see any traffic in the air either. Is this the correct setting to change

"filters": { "hide_above_alt": 8000, "hide_above_spd": 250, "radar_range_nm": 30, "night_alpha_setting": 110, "pro_mode": { "enable": false, "accept_pilot_squawk": false, "do_not_autocorrelate_squawks": [ "2000", "2200", "1200", "7000"

On Fri, May 15, 2020 at 2:03 PM Eric notifications@github.com wrote:

@GraemeFlo https://github.com/GraemeFlo Denver is at an altitude of 5000ft so you'll need to change the altitude filter in the vSMR config file. See #65 https://github.com/pierr3/vSMR/issues/65 :)

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/pierr3/vSMR/issues/73#issuecomment-629455747, or unsubscribe https://github.com/notifications/unsubscribe-auth/APSELJS54Z7MZAM5XJDL3TDRRWN2XANCNFSM4NBDP4RQ .