Open ayoub-boulehfa opened 3 years ago
Hello,
Yes, it is. If you connect a MCP2518 to an Arduino Uno, Vdd of MCP2518 must be at 5V.
Regards,
Pierre Molinaro
Le 6 avr. 2021 à 10:40, ayoub-boulehfa @.***> a écrit :
is this Library compatible with the schematic in the link https://www.analog.com/en/design-center/reference-designs/circuits-from-the-lab/cn0401.html https://www.analog.com/en/design-center/reference-designs/circuits-from-the-lab/cn0401.html ?
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/pierremolinaro/acan2517FD/issues/21, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEWKZVBNTKHZCNQCSQRZM23THLCGTANCNFSM42OIXJVA.
is this Library compatible with the schematic in the link https://www.analog.com/en/design-center/reference-designs/circuits-from-the-lab/cn0401.html ?