Homeduino with ATmega32u4

[TRIROG]

Hi! I'm unable to get anything out of ATmega32u4. I can flash it but when i do make monitor i cant get no response. Pressing any key on keyboard makes led flash but otherwise i get no response in terminal.

pi@rPi-OVPN ~/homeduino $ make upload
-------------------------
Arduino.mk Configuration:
- [AUTODETECTED]       CURRENT_OS = LINUX
- [USER]               ARDMK_DIR = /home/pi/homeduino/arduino-mk
- [AUTODETECTED]       ARDUINO_DIR = /usr/share/arduino
- [AUTODETECTED]       ARDUINO_VERSION = 105
- [DEFAULT]            ARCHITECTURE =
- [DEFAULT]            VENDOR = arduino
- [DEFAULT]            ARDUINO_SKETCHBOOK = /home/pi/sketchbook
- [BUNDLED]            AVR_TOOLS_DIR = /usr/share/arduino/hardware/tools/avr (in Arduino distribution)
- [COMPUTED]           ARDUINO_LIB_PATH = /usr/share/arduino/libraries (from ARDUINO_DIR)
- [DEFAULT]            ARDUINO_CORE_PATH = /usr/share/arduino/hardware/arduino//cores/arduino
- [COMPUTED]           ARDUINO_VAR_PATH = /usr/share/arduino/hardware/arduino//variants (from ARDUINO_DIR)
- [COMPUTED]           BOARDS_TXT = /usr/share/arduino/hardware/arduino//boards.txt (from ARDUINO_DIR)
- [USER]               USER_LIB_PATH = /home/pi/homeduino/libraries
- [DEFAULT]            PRE_BUILD_HOOK = pre-build-hook.sh
- [USER]               BOARD_TAG = leonardo
- [COMPUTED]           OBJDIR = build-leonardo (from BOARD_TAG)
- [DETECTED]           MONITOR_BAUDRATE = 115200  (in sketch)
- [DEFAULT]            OPTIMIZATION_LEVEL = s
- [DEFAULT]            MCU_FLAG_NAME = mmcu
- [DEFAULT]            CFLAGS_STD =
- [DEFAULT]            CXXFLAGS_STD =
- [COMPUTED]           DEVICE_PATH = /dev/ttyACM0 (from MONITOR_PORT)
- [AUTODETECTED]       Size utility: AVR-aware for enhanced output
-
-                      ARDUINO_LIBS =
- [USER]                 SerialCommand
- [USER]                 RFControl
- [USER]                 Keypad
- [USER]                 DHTlib
- [USER]                 Keypad/utility
- [COMPUTED]           BOOTLOADER_PARENT = /usr/share/arduino/hardware/arduino//bootloaders (from ARDUINO_DIR)
- [COMPUTED]           ARDMK_VERSION = 1.3.4
- [COMPUTED]           CC_VERSION = 4.8.1 (avr-gcc)
-------------------------
mkdir -p build-leonardo
make reset
make[1]: Entering directory '/home/pi/homeduino'
/home/pi/homeduino/arduino-mk/bin/ard-reset-arduino --caterina  /dev/ttyACM0
make[1]: Leaving directory '/home/pi/homeduino'
make do_upload
make[1]: Entering directory '/home/pi/homeduino'
/usr/share/arduino/hardware/tools/avr/../avrdude -q -V -D -p atmega32u4 -C /usr/share/arduino/hardware/tools/avr/../avrdude.conf -c avr109 -b 57600 -P /dev/ttyACM0 \
                -U flash:w:build-leonardo/homeduino.hex:i

Connecting to programmer: .
Found programmer: Id = "CATERIN"; type = S
    Software Version = 1.0; No Hardware Version given.
Programmer supports auto addr increment.
Programmer supports buffered memory access with buffersize=128 bytes.

Programmer supports the following devices:
    Device code: 0x44

avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x1e9587
avrdude: reading input file "build-leonardo/homeduino.hex"
avrdude: writing flash (14944 bytes):
avrdude: 14944 bytes of flash written

avrdude: safemode: Fuses OK (E:CB, H:D8, L:FF)

avrdude done.  Thank you.

make[1]: Leaving directory '/home/pi/homeduino'

[mwittig]

Do you get a "ready" prompt when executing make monitor?

[TRIROG]

No. Just a blank screen.