search

pimatic / rfcontroljs

nodejs modul with protocol support for different 433mhz switches and weather stations for the RFControl Arduino library.
GNU General Public License v3.0
49 stars 54 forks source link

Elro Home Easy HE877 switch problem #32

Closed Takisg closed 9 years ago

Takisg commented 9 years ago

Elro Home Easy HE877 switch working with protocol "switch 2". I have a problem with the receiving mode. On receiver mode decode the off command from the remote control but the on command decode the same result off.

Debug ON switch3: { houseCode: 22, unitCode: 10, state: false } switch2: { houseCode: 22, unitCode: 10, state: false }

OFF switch3: { houseCode: 22, unitCode: 10, state: true } switch2: { houseCode: 22, unitCode: 10, state: false }

Any help......

Icesory commented 9 years ago

try this https://github.com/pimatic/pimatic/issues/476#issuecomment-70374069

Takisg commented 9 years ago

I try your solution....

Now with the modify protocol switch4 i relearn the switch and it is working. But the state in the gui not change anymore.

The strange is that the log says true and false for the received state....

Xento commented 9 years ago

I think this is the same problem that I had: https://github.com/pimatic/pimatic-homeduino/issues/30

RaspiGuru commented 7 years ago

Hi Guys, I would like to control my HomeEasy HE877A model wireless plugs with my Raspberry equiped with a 433Mhz emitter. I am new to this, could you please anyone help me to install it? I would like to be know the requirements (libraries and plugins) and installation procedures. With regards

leader21 commented 7 years ago

You need the homeduino plugin. Check out howto section to.learn more. If you need any further assistance please use our forum.pimatic.org thx! https://forum.pimatic.org/topic/202/4-homeduino-433-mhz-sending-receiving-and-even-more