Closed El-mou33 closed 1 year ago
It isn't possible to acess kernel a blank page appears so it is impossible to change parameters.
When I use the command sudo nano /etc/default/grub shows a blank page
sudo nano /etc/default/grub
I just want to change pcie_aspm=off to use the usb ports. But I can't.
Raspberry pi doesn't run grub. Kernel parameters are in /boot/firmware/cmdline.txt for Debian, and I think /boot/cmdline.txt for Raspbian/Raspberry Pi OS See https://raspi.debian.net/defaults-and-settings/
It isn't possible to acess kernel a blank page appears so it is impossible to change parameters.
When I use the command
sudo nano /etc/default/grub
shows a blank pageI just want to change pcie_aspm=off to use the usb ports. But I can't.