Closed Dattel closed 2 years ago
turns out, that it is important to access the frontend using the DNS-name instead of IP..
so instead of using https://192.168.178.6:8006 i have to use https://pimox.fritz.box:8006 What is the reason for that?
Check the "Precheck" list on README ?
thanks, i realized, that the pi needs a valid name and it was indead proper configured but the name was not registered in local-DNS. so i thought if the frontend came up via https://ip it could also work.... but dosn't....
nevertheless - it's not a problem, if you know about that :-D
really, I not try yet. I am waiting for weekend ^^ I can give feedback with my experience ;)
Did you change anything on that? since the latest release i'm able to login through DDNS and IP as expected.
Its ok.!!
Just thing i found. I have unable to import an HomeAssistant .qcow2 image
Hi there. Thanks for the port :-D
i just used the automatic installer on the "2021-10-30-raspios-bullseye-arm64-lite.zip" image on a RPI4. The Installation runs fine, the WebFrontend is accessible through the network but i can't log in.
With LinuxPAM authentication module and Proxmox VE Authentication Connection failure. Network error or Proxmox VE services not running?
Any ideas on that? I already tried with the "curl https://raw.githubusercontent.com/pimox/pimox7/master/pimox.sh | sh" in an earlier try on a clean system but i had other issues like VMBR0 not configured or empty dashboard after login in through web.