stuck at "CFG" start screen

[GoogleCodeExporter]

What steps will reproduce the problem?
1.Use a 160 gig Maxtor hard drive, WBFS
2.Plug it into the usb slot nearest to the edge
3. Run Configurable Usb Loader via the Homebrew Channel

What is the expected output? What do you see instead?
I was expecting it to load up and show the games i have installed into my hard 
drive. It instead stayed at a screen with "CFG" in the center with blue stuff 
to both sides.

What version of the loader are you using?
v69

What is your System Menu version (e.g. 4.2u)?
4.2u

What is your media type (HDD, USB Flash, SD/SDHC)?
HDD

How is your media formatted (wbfs, fat32, ntfs)?
wbfs

Which cios are you using, which version, which base (222,249,...)?
(Please try both 249 and 222 with cfg-222.dol)
I actually am not very sure. I'm quite new to Wii hacking.

Does it work with other loaders?
Yes, it works well with Uloader, but I want to switch to CFG Usb Loader

Does it work with the latest or an older version?
It works with 5.1 the latest.

Please provide any additional information below.
I followed GAF's tutorial to install Configurable Usb Loader and the previous 
steps, if that is any help.

Original issue reported on code.google.com by brandon....@yahoo.com on 3 Jul 2011 at 3:16

[GoogleCodeExporter]

Try installing cios d2x v6 to slot 249
Also try updating to v70b5

Original comment by ogg...@gmail.com on 3 Jul 2011 at 9:08

• Changed state: Waiting

[GoogleCodeExporter]

what base should i use?

Original comment by brandon....@yahoo.com on 3 Jul 2011 at 11:15

[GoogleCodeExporter]

I installed d2x v6 into slot 249, with base 37, but CFG loader still won't 
work. Any ideas? thanks

Original comment by brandon....@yahoo.com on 4 Jul 2011 at 1:50

[GoogleCodeExporter]

Try base 57 then if that fails try base 58 as that has the most compatability 
but can cause some small weird issues later on you will have to get through 
like i did

Original comment by andi.ire...@gmail.com on 4 Jul 2011 at 5:46

[GoogleCodeExporter]

base 56 is the most popular choice

Original comment by ogg...@gmail.com on 4 Jul 2011 at 6:06

[GoogleCodeExporter]

base 56 didn't work also.... btw I end up having to hard reset to get out of 
the CFG start screen. I will try the other bases now

Original comment by brandon....@yahoo.com on 4 Jul 2011 at 4:35

[GoogleCodeExporter]

thanks for the help guys! i got cfg loader to work with d2x v6 base 58, but 
when i selected usb mass storage device for the wbfs partition, it said "auto 
not found" or something like that. The i had to manually select the partition, 
but it would not allow me to select any of the partitions for some reason. it 
also showed more partitions tan i acually have on my hdd.  I eventually exited 
and started up uloader, to see if i did anything, and all my backups were still 
intact. Any ideas?

Original comment by brandon....@yahoo.com on 4 Jul 2011 at 4:55

[GoogleCodeExporter]

those extra partitions are probably hidden partitions on your device 

try setting device = usb instead of device = auto and partition = ntfsN where N 
is the number from 1 upwards of the ntfs partition incrementally

Original comment by andi.ire...@gmail.com on 5 Jul 2011 at 4:06

[GoogleCodeExporter]

Wait, i'm confused. How would I set those listed settings?

Original comment by brandon....@yahoo.com on 5 Jul 2011 at 10:23

[GoogleCodeExporter]

base 56 helped me

Original comment by domantas...@gmail.com on 18 Feb 2014 at 9:29