Closed microbit-mark closed 4 years ago
Following error noted on pin 11 description: P11 (the other being P11) is one of the two pins wired directly to the micro:bits onboard A and B push buttons. Should be P5.
I’ll add these fixes into #3 before it is merged
@Gadgetoid we'd like to link to this resource on tech.microbit.org. Could you update info on https://github.com/Gadgetoid/microbit.pinout.xyz/blob/master/pin/p19.md https://github.com/Gadgetoid/microbit.pinout.xyz/blob/master/pin/p20.md
with current information from https://tech.microbit.org/hardware/i2c/#table-of-addresses-used
suggest something like: "Two devices are connected to the micro:bit's I²C bus internally; the Accelerometer and Magnetometer. The I²C address used is dependent on the variant of the device you have. You cannot connect an external device that uses either of these addresses."