Pixracer: PB0 (PPM in) should use RC_INPUT, not FMU_RC_INPUT

pixhawk / Hardware

PX4 Hardware designs

1.03k stars 868 forks source link

Closed LorenzMeier closed 8 years ago

LorenzMeier commented 8 years ago

@nickarsov The connection to PB0 should be straight from the raw and non-inverted signal (RC_INPUT), not from behind the inverter.

Independent on how we do the new inverting circuitry that pattern will allow Spektrum binding.

nickarsov commented 8 years ago

Exactly...I have already separated the two lines in RC13 and RC14

LorenzMeier commented 8 years ago

Done.