search

pixhawk / Hardware

PX4 Hardware designs
1.03k stars 868 forks source link

Pixhawk VTOL Issue #62

Closed VagishB closed 8 years ago

VagishB commented 8 years ago

Hi guys, I am using pixhawk VTOL firmware in my V-tail airframe. Once I switch ON the safety switch, the plane motor is still beeping(I have also BEC in ESC). Could you guys help me?

LorenzMeier commented 8 years ago

Is your motor connected to AUX5? There should be a standby signal: https://github.com/PX4/Firmware/blob/master/ROMFS/px4fmu_common/init.d/13007_vtol_AAVVT_quad#L41

VagishB commented 8 years ago

Yes my motor is connected in Aux 5 only. On 23 Feb 2016 3:49 pm, "Lorenz Meier" notifications@github.com wrote:

Is your motor connected to AUX5? There should be a standby signal:

https://github.com/PX4/Firmware/blob/master/ROMFS/px4fmu_common/init.d/13007_vtol_AAVVT_quad#L41

— Reply to this email directly or view it on GitHub https://github.com/PX4/Hardware/issues/62#issuecomment-187587662.