fresh install

[luscaGIT]

Hi,

Im trying to install your Xcomfort intregration to use with my newly installed ZIP Screens. Would like to get the lux value from a HUE outdoor sensor and make the zip screens go down on a value and up on another.

But the issue for me is that I cant login it seems. I provided a screenshot of the error log. But im not able to pinpoint the issue with my lack of code experience. Ive tried different usernames but does not seems to make a difference.

Installed via HACS

[plamish]

Hey luscaGIT, message error says Home Assistant can't connect with your SHC xComfort box. I advise to login to SHC and validate 192.168.83 is correct IP address and Local HTTP Connection is enabled. You can do both in SHC's System->Network tab. If both are OK check if SHC is reachable from Home Assistant. Simplest way is to install Terminal Add-on and run wget 192.168.1.83. If all is fine you will get 401 error with authentication failed message.

[luscaGIT]

Ok, thanks for the quick reply. It seems I do not have access to the remote web admin page. Cant remember to ever seen or received a remote access key.

according to my router the ip is idd. 192.168.1.83, confirmed with mac-address.. I assume the web admin page is the area you are talking about to enable the HTTP Connection, as I can not find it in either xSetup or MRF..

Edit: missed your wget instruction. Tried and got the connection refused error

[plamish]

Login to https://mysmarthome.eaton.com/ .Then in 2.System-> Network tab you can enable local connection.

If you can't see Configuration console you likely have user not admin login

[luscaGIT]

Login to https://mysmarthome.eaton.com/ .Then in 2.System-> Network tab you can enable local connection.

If you can't see Configuration console you likely have user not admin login

Yes that is true.. Im trying to get a hold of this " remote access key" that I have to have. I cant recall having a key of that sort on the install of the X-1 controller 6years ago.

Ive sent an email to Eaton to ask.

[luscaGIT]

Oh I see, there is a difference between "SHC" and "X-1" . I have the newer X-1, does that mean that this integration does not work for me?

[plamish]

Frankly, I haven't heard about X-1 before. It looks like a different solution from SHC: https://byggebolig.no/smarthus/xcomfort-shc-eller-sensio-x1 and seems doesn't support direct HTTP connection. Maybe it has other options to integrate with HA like IFTTT

[luscaGIT]

Hi, sorry to bother you again.. just to be clear

this is the device I have and trying to intregrate :

here is the IP from xsetup

and the error log : 2022-01-14 10:59:41 WARNING (SyncWorker_0) [homeassistant.loader] We found a custom integration hacs which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant 2022-01-14 10:59:41 WARNING (SyncWorker_1) [homeassistant.loader] We found a custom integration xcomfort which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant 2022-01-14 10:59:51 ERROR (MainThread) [homeassistant.config_entries] Error setting up entry XComfort for xcomfort Traceback (most recent call last): File "/usr/local/lib/python3.9/site-packages/aiohttp/connector.py", line 986, in _wrap_create_connection return await self._loop.create_connection(*args, **kwargs) # type: ignore[return-value] # noqa File "/usr/local/lib/python3.9/asyncio/base_events.py", line 1056, in create_connection raise exceptions[0] File "/usr/local/lib/python3.9/asyncio/base_events.py", line 1041, in create_connection sock = await self._connect_sock( File "/usr/local/lib/python3.9/asyncio/base_events.py", line 955, in _connect_sock await self.sock_connect(sock, address) File "/usr/local/lib/python3.9/asyncio/selector_events.py", line 502, in sock_connect return await fut File "/usr/local/lib/python3.9/asyncio/selector_events.py", line 537, in _sock_connect_cb raise OSError(err, f'Connect call failed {address}') ConnectionRefusedError: [Errno 111] Connect call failed ('192.168.1.83', 80) The above exception was the direct cause of the following exception: Traceback (most recent call last): File "/usr/src/homeassistant/homeassistant/config_entries.py", line 313, in async_setup result = await component.async_setup_entry(hass, self) # type: ignore File "/config/custom_components/xcomfort/init.py", line 23, in async_setup_entry await coordinator.xc.connect() File "/config/custom_components/xcomfort/xcomfortAPI.py", line 42, in connect async with self.session.get(self.url, auth=auth) as response: File "/usr/local/lib/python3.9/site-packages/aiohttp/client.py", line 1138, in aenter self._resp = await self._coro File "/usr/local/lib/python3.9/site-packages/aiohttp/client.py", line 535, in _request conn = await self._connector.connect( File "/usr/local/lib/python3.9/site-packages/aiohttp/connector.py", line 542, in connect proto = await self._create_connection(req, traces, timeout) File "/usr/local/lib/python3.9/site-packages/aiohttp/connector.py", line 907, in _createconnection , proto = await self._create_direct_connection(req, traces, timeout) File "/usr/local/lib/python3.9/site-packages/aiohttp/connector.py", line 1206, in _create_direct_connection raise last_exc File "/usr/local/lib/python3.9/site-packages/aiohttp/connector.py", line 1175, in _create_direct_connection transp, proto = await self._wrap_create_connection( File "/usr/local/lib/python3.9/site-packages/aiohttp/connector.py", line 992, in _wrap_create_connection raise client_error(req.connection_key, exc) from exc aiohttp.client_exceptions.ClientConnectorError: Cannot connect to host 192.168.1.83:80 ssl:default [Connect call failed ('192.168.1.83', 80)] 2022-01-14 11:00:08 ERROR (MainThread) [homeassistant] Error doing job: Task exception was never retrieved Traceback (most recent call last): File "/usr/src/homeassistant/homeassistant/data_entry_flow.py", line 203, in async_init flow, result = await task File "/usr/src/homeassistant/homeassistant/data_entry_flow.py", line 230, in _async_init result = await self._async_handle_step(flow, flow.init_step, data, init_done) File "/usr/src/homeassistant/homeassistant/data_entry_flow.py", line 325, in _async_handle_step result: FlowResult = await getattr(flow, method)(user_input) File "/usr/src/homeassistant/homeassistant/components/samsungtv/config_flow.py", line 271, in async_step_ssdp self._manufacturer = discovery_info.upnp[ssdp.ATTR_UPNP_MANUFACTURER] KeyError: 'manufacturer'

Is the device I have wrong from what you made the app for or do I need to open a port ? The htttp/ipadress /system/config link from docu doesent give any info either(ofc used the device's ip).

[plamish]

The integration supports Eaton SHC device, which apparently looks very similar to yours, but according to what I learned from the Internet is a different device. Sensio doesn't provide local http server with json-rpc protocol what is how the integration communicates with Eaton SHC.

I'd advise to contact Sensio vendor with question what are the possible integration capabilities. I found on their website that Google Home integration is feasible, so there is a chance they have something else what is supported by Home Assistant

Good luck

[BirgerKo]

Hi, I can shed some light on this. Sensio is separate company working with home automations. Sensio has some sort of collaboration with Eaton and the X-1 is the same HW as the SHC. The SW is completely different.