Test/texture pack - Githubissues

eugene-doobu commented 2 months ago

Description

텍스처 압축 테스트 pr입니다
테스트 결과에 따라 머지가 안될 수 있습니다.

github-actions[bot] commented 2 months ago

@eugene-doobu The versions of bundled Libplanet assemblies and Libplanet submodule vendored by Lib9c apparently do not match:

Libplanet submdoule: 4.0.1
Libplanet.Action.dll: 4.0.6
Libplanet.Common.dll: 4.0.6
Libplanet.Crypto.dll: 4.0.6
Libplanet.RocksDBStore.dll: 4.0.6
Libplanet.Store.dll: 4.0.6
Libplanet.Types.dll: 4.0.6
Libplanet.dll: 4.0.6

Leave a comment in this pull_request with the following command to let the bot upgrade bundled Libplanet assemblies:

/update-libplanet-dlls

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 95445 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +85167 -10278 Percentile : 100% Total files changed: 2906 Change summary by file extension: .yml : +1 -1 .meta : +79007 -7298 .txt : +2685 -2359 .asset : +53 -0 .mat : +93 -0 .prefab : +3181 -507 .asmdef : +1 -1 .cs : +128 -98 .plist : +9 -9 .json : +1 -1 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

sonohoshi commented 2 months ago

변경 커밋이 너무 많이 쌓여있어서 rebase를 한번 해주시면 좋을거같습니다.

eugene-doobu commented 2 months ago

@sonohoshi 변경 커밋이 쌓여있는건 아마 깃허브 임시 버그였던것같은데.. 일단 dev브랜치 머지받아왔더니 해결됬습니다

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 2 months ago

This PR has 92410 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +84718 -7692 Percentile : 100% Total files changed: 3000 Change summary by file extension: .meta : +84710 -7688 .renderTexture : +8 -4 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup: :ok_hand: :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

planetarium / NineChronicles

Test/texture pack #4419

Description