search

planetarium / libplanet

Blockchain in C#/.NET for on-chain, decentralized gaming
https://docs.libplanet.io/
GNU Lesser General Public License v2.1
506 stars 139 forks source link

Introduce `ConsensusCryptoBackend`, `Proof`, `Lot` #3700

Closed OnedgeLee closed 3 months ago

OnedgeLee commented 3 months ago

To use VRF on consensus, three features are added.

  1. ConsensusCryptoBackend : Implements ECVRF functionalities.
  2. Proof : Wrapper class of VRF proof that contains not only verification of proof but also sortition logic.
  3. Lot : Represents lots from each validators to participate in the sortition of proposer. Includes payload of proof, public key, and proof.

Scenario is as follows:

  1. Each validator sends an PreEvaluationBlock with Lot. (PreEvaluationBlock contains Proof that is same to the Lot.Proof)
  2. Each validator decides the proposer, and set proper PreEvaluationBlock as an proposed pre-evaluation block, and starts Propose step.
  3. Proposer and validators evaluates PreEvaluationBlock simultaneously on the Propose step.
pull-request-quantifier-deprecated[bot] commented 3 months ago

This PR has 357 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Large Size : +357 -0 Percentile : 75.7% Total files changed: 10 Change summary by file extension: .cs : +357 -0 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 3 months ago

This PR has 359 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Large Size : +359 -0 Percentile : 75.9% Total files changed: 10 Change summary by file extension: .cs : +359 -0 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 3 months ago

This PR has 377 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Large Size : +376 -1 Percentile : 77.7% Total files changed: 11 Change summary by file extension: .md : +16 -1 .cs : +360 -0 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 3 months ago

This PR has 381 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Large Size : +380 -1 Percentile : 78.1% Total files changed: 11 Change summary by file extension: .md : +16 -1 .cs : +364 -0 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 3 months ago

This PR has 622 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +621 -1 Percentile : 87.4% Total files changed: 17 Change summary by file extension: .md : +16 -1 .cs : +605 -0 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 3 months ago

This PR has 623 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +622 -1 Percentile : 87.43% Total files changed: 17 Change summary by file extension: .md : +17 -1 .cs : +605 -0 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

OnedgeLee commented 3 months ago

We need note to CHANGES.md about this.

Noted!