search

platformio / platform-atmelavr

Atmel AVR: development platform for PlatformIO
https://registry.platformio.org/platforms/platformio/atmelavr
Apache License 2.0
139 stars 105 forks source link

usbasp doesn't work properly for ATTINY Core #156

Open MatCat opened 5 years ago

MatCat commented 5 years ago

Trying to use usbasp as a programmer for certain attinys (I tried with ATTINY828) does not work, as the avrdude.conf supplied by the attiny core needs to be used. Original thread: https://community.platformio.org/t/cant-seem-to-upload-using-usbasp-to-attiny828/8850

MCUdude commented 3 years ago

@valeros this is a very simple fix. Just add the following section to the avrdude.conf file that's bundled with platform-atmelavr:

#------------------------------------------------------------
# ATtiny828
#------------------------------------------------------------

part
    id              = "t828";
    desc            = "ATtiny828";
     has_debugwire = yes;
     flash_instr   = 0xB6, 0x01, 0x11;
     eeprom_instr  = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00,
                0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF,
                0x99, 0xF9, 0xBB, 0xAF;
    stk500_devcode  = 0x86;
    # avr910_devcode = 0x;
    signature       = 0x1e 0x93 0x14;
    pagel           = 0xd7;
    bs2             = 0xc2;
    chip_erase_delay = 15000;
    pgm_enable       = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
                       "x x x x x x x x x x x x x x x x";

    chip_erase       = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
                       "x x x x x x x x x x x x x x x x";

    timeout         = 200;
    stabdelay       = 100;
    cmdexedelay     = 25;
    synchloops      = 32;
    bytedelay       = 0;
    pollindex       = 3;
    pollvalue       = 0x53;
    predelay        = 1;
    postdelay       = 1;
    pollmethod      = 1;

    pp_controlstack     =
   0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
   0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
   0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
   0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
    hventerstabdelay    = 100;
    progmodedelay       = 0;
    latchcycles         = 5;
    togglevtg           = 1;
    poweroffdelay       = 15;
    resetdelayms        = 1;
    resetdelayus        = 0;
    hvleavestabdelay    = 15;
    resetdelay          = 15;
    chiperasepulsewidth = 0;
    chiperasepolltimeout = 10;
    programfusepulsewidth = 0;
    programfusepolltimeout = 5;
    programlockpulsewidth = 0;
    programlockpolltimeout = 5;

    memory "eeprom"
        paged           = no;
        page_size       = 4;
        size            = 256;
        min_write_delay = 3600;
        max_write_delay = 3600;
        readback_p1     = 0xff;
        readback_p2     = 0xff;
        read            = " 1 0 1 0 0 0 0 0",
                          " 0 0 0 x x x x a8",
                          " a7 a6 a5 a4 a3 a2 a1 a0",
                          " o o o o o o o o";

        write           = " 1 1 0 0 0 0 0 0",
                          " 0 0 0 x x x x a8",
                          " a7 a6 a5 a4 a3 a2 a1 a0",
                          " i i i i i i i i";

   loadpage_lo   = "  1   1   0   0      0   0   0   1",
                   "  0   0   0   0      0   0   0   0",
                   "  0   0   0   0      0   0  a1  a0",
                   "  i   i   i   i      i   i   i   i";

writepage   = "  1   1   0   0      0   0   1   0",
              "  0   0   x   x      x   x   x  a8",
              " a7  a6  a5  a4     a3  a2   0   0",
              "  x   x   x   x      x   x   x   x";

   mode      = 0x41;
   delay      = 5;
   blocksize   = 4;
   readsize   = 256;
        ;

    memory "flash"
        paged           = yes;
        size            = 8192;
        page_size       = 64;
        num_pages       = 128;
        min_write_delay = 4500;
        max_write_delay = 4500;
        readback_p1     = 0xff;
        readback_p2     = 0xff;
        read_lo         = " 0 0 1 0 0 0 0 0",
                          " 0 0 0 0 a11 a10 a9 a8",
                          " a7 a6 a5 a4 a3 a2 a1 a0",
                          " o o o o o o o o";

        read_hi          = " 0 0 1 0 1 0 0 0",
                           " 0 0 0 0 a11 a10 a9 a8",
                           " a7 a6 a5 a4 a3 a2 a1 a0",
                           " o o o o o o o o";

        loadpage_lo     = " 0 1 0 0 0 0 0 0",
                          " 0 0 0 x x x x x",
                          " x x x a4 a3 a2 a1 a0",
                          " i i i i i i i i";

        loadpage_hi     = " 0 1 0 0 1 0 0 0",
                          " 0 0 0 x x x x x",
                          " x x x a4 a3 a2 a1 a0",
                          " i i i i i i i i";

        writepage       = " 0 1 0 0 1 1 0 0",
                          " 0 0 0 0 a11 a10 a9 a8",
                          " a7 a6 a5 x x x x x",
                          " x x x x x x x x";

        mode        = 0x41;
        delay       = 6;
        blocksize   = 128;
        readsize    = 256;

        ;

    memory "lfuse"
        size            = 1;
        min_write_delay = 4500;
        max_write_delay = 4500;
        read            = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
                          "x x x x x x x x o o o o o o o o";

        write           = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
                          "x x x x x x x x i i i i i i i i";
        ;

    memory "hfuse"
        size            = 1;
        min_write_delay = 4500;
        max_write_delay = 4500;
        read            = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
                          "x x x x x x x x o o o o o o o o";

        write           = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
                          "x x x x x x x x i i i i i i i i";
        ;

    memory "efuse"
        size            = 1;
        min_write_delay = 4500;
        max_write_delay = 4500;
        read            = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
                          "x x x x x x x x o o o o o o o o";

        write           = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
                          "x x x x x x x x 1 1 1 i i i i i";
        ;

    memory "lock"
        size            = 1;
        min_write_delay = 4500;
        max_write_delay = 4500;
        read            = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
                          "x x x x x x x x o o o o o o o o";

        write           = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
                          "x x x x x x x x 1 1 i i i i i i";
        ;

    memory "calibration"
        size            = 1;
        read            = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
                          "0 0 0 0 0 0 0 0 o o o o o o o o";
        ;

    memory "signature"
        size            = 3;
        read            = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
                          "x x x x x x a1 a0 o o o o o o o o";
        ;
;
thirstyice commented 1 year ago

This also seems to affect the attiny85

MCUdude commented 1 year ago

That's not true. Can you post the Avrdude output?

thirstyice commented 1 year ago 
<lambda>(["upload"], [".pio/build/attiny85/firmware.hex"])
AVAILABLE: usbasp
CURRENT: upload_protocol = usbasp
BeforeUpload(["upload"], [".pio/build/attiny85/firmware.hex"])
avrdude -v -p attiny85 -C /Users/tauran/.platformio/packages/tool-avrdude@1.60300.200527/avrdude.conf -c usbasp -e -D -U flash:w:.pio/build/attiny85/firmware.hex:i

avrdude: Version 6.3-20190619
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "/Users/tauran/.platformio/packages/tool-avrdude@1.60300.200527/avrdude.conf"
         User configuration file is "/Users/tauran/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : usb
         Using Programmer              : usbasp
         AVR Part                      : ATtiny85
         Chip Erase delay              : 400000 us
         PAGEL                         : P00
         BS2                           : P00
         RESET disposition             : possible i/o
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65    12     4    0 no        512    4      0  4000  4500 0xff 0xff
           flash         65     6    32    0 yes      8192   64    128 30000 30000 0xff 0xff
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00
           lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00

         Programmer Type : usbasp
         Description     : USBasp, http://www.fischl.de/usbasp/

avrdude: auto set sck period (because given equals null)
avrdude: error: program enable: target doesn't answer. 1 
avrdude: initialization failed, rc=-1
         Double check connections and try again, or use -F to override
         this check.

avrdude done.  Thank you.

*** [upload] Error 1

The avrdude command is specifying the default platformio avrdude.conf instead of the one included with the library.

And here's my platformio.ini, in case it's something to do with my setup:

env:attiny85]
platform = atmelavr
board = attiny85
framework = arduino
lib_deps = mathertel/RotaryEncoder@^1.5.3
upload_protocol = usbasp
board_build.f_cpu = 1000000L
board_hardware.oscillator = internal
board_hardware.uart = no_bootloader
board_hardware.bod = 1.8v
build_flags = -flto