ESP32 fail to start debug jlink

[mlopezpalma]

Dear sirs I am using jlink for debug in ESP32 ; until now is working ok ; but in a new project is giving the next error and I can not start debug

COMPILATION OK Linking .pio/build/esp32dev/firmware.elf Retrieving maximum program size .pio/build/esp32dev/firmware.elf Checking size .pio/build/esp32dev/firmware.elf Advanced Memory Usage is available via “PlatformIO Home > Project Inspect” RAM: [== ] 21.6% (used 70720 bytes from 327680 bytes) Flash: [========= ] 91.5% (used 2878214 bytes from 3145728 bytes) Building .pio/build/esp32dev/firmware.bin esptool.py v3.1 Merged 1 ELF section ======================== [SUCCESS] Took 122.03 seconds ========================

Reading symbols from /home/manuel/Documents/PlatformIO/Projects/esp32Marçalv8_vmlp/.pio/build/esp32dev/firmware.elf… done. PlatformIO Unified Debugger → http://bit.ly/pio-debug PlatformIO: debug_tool = jlink PlatformIO: Initializing remote target… Open On-Chip Debugger v0.10.0-esp32-20210721 (2021-07-21-13:33) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html WARNING: boards/esp-wroom-32.cfg is deprecated, and may be removed in a future release. adapter speed: 5000 kHz

Info : tcl server disabled Info : telnet server disabled Info : J-Link ARM V8 compiled Nov 28 2014 13:44:46 Info : Hardware version: 8.00 Info : VTarget = 3.351 V Info : clock speed 5000 kHz Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : esp32.cpu0: Debug controller was reset. Info : esp32.cpu0: Core was reset. Info : esp32.cpu0: Detected debug stubs @ 3ffcd318 Info : esp32.cpu1: Debug controller was reset. Info : esp32.cpu1: Core was reset. Info : accepting ‘gdb’ connection from pipe Warn : No symbols for FreeRTOS! Info : esp32.cpu0: Target halted, PC=0x40135156, debug_reason=00000000 Info : Set GDB target to ‘esp32.cpu0’ Info : esp32.cpu1: Target halted, PC=0x40135156, debug_reason=00000000 Warn : Not full dbg stub table 1 of 2 Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001 Info : Flash mapping 0: 0x10020 → 0x3f400020, 2306 KB Info : Flash mapping 1: 0x260018 → 0x400d0018, 412 KB Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001 Info : Auto-detected flash bank ‘esp32.cpu0.flash’ size 4096 KB Info : Using flash bank ‘esp32.cpu0.flash’ size 4096 KB Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001 Info : Flash mapping 0: 0x10020 → 0x3f400020, 2306 KB Info : Flash mapping 1: 0x260018 → 0x400d0018, 412 KB Info : Using flash bank ‘esp32.cpu0.irom’ size 416 KB Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001 Info : Flash mapping 0: 0x10020 → 0x3f400020, 2306 KB Info : Flash mapping 1: 0x260018 → 0x400d0018, 412 KB Info : Using flash bank ‘esp32.cpu0.drom’ size 2308 KB Info : New GDB Connection: 1, Target esp32.cpu0, state: halted 0x40135156 in _svfwprintf_r (data=, fp=, fmt0=, ap=…) at …/…/…/…/./newlib/libc/stdio/vfwprintf.c:924 924 …/…/…/…/./newlib/libc/stdio/vfwprintf.c: No existe el archivo o el directorio. Loading section .flash.rodata, size 0x242070 lma 0x3f400020 Warn : address 0x3f641000 not writable Warn : address 0x3f642000 not writable .pioinit:12: Error in sourced command file: Load failed .pioinit:12: Error in sourced command file: Load failed

FINALLY DO NOT START

Any one can help

Many thanks

additional info I can upload the program memory using jlink with platformio upload tools without problem

platformio.ini

[env:esp32dev] platform = espressif32 board = esp32dev framework = arduino ; change microcontroller lib_deps = bblanchon/ArduinoJson@^6.18.3 upload_protocol = jlink debug_tool = jlink monitor_speed = 921600 board_build.f_cpu = 240000000L board_build.f_flash = 80000000L board_build.partitions = huge_app.csv build_flags = -DF_CPU=240000000L

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. Please provide more details or it will be closed if no further activity occurs. Thank you for your contributions.

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. Please provide more details or it will be closed if no further activity occurs. Thank you for your contributions.