Open tcurdt opened 2 years ago
The upload fails. What could be the problem?
pio run -v -t upload Processing nodemcu (platform: espressif8266; board: nodemcu; framework: arduino; upload_port: /dev/tty.usbserial-210) ------------------------------------------------------------------------------------------------------------ CONFIGURATION: https://docs.platformio.org/page/boards/espressif8266/nodemcu.html PLATFORM: Espressif 8266 (3.2.0) > NodeMCU 0.9 (ESP-12 Module) HARDWARE: ESP8266 80MHz, 80KB RAM, 4MB Flash PACKAGES: - framework-arduinoespressif8266 3.30002.0 (3.0.2) - tool-esptool 1.413.0 (4.13) - tool-esptoolpy 1.30000.201119 (3.0.0) - tool-mklittlefs 1.203.210628 (2.3) - tool-mkspiffs 1.200.0 (2.0) - toolchain-xtensa 2.100300.210717 (10.3.0) LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 35 compatible libraries Scanning dependencies... No dependencies Building in release mode <lambda>(["checkprogsize"], [".pio/build/nodemcu/firmware.elf"]) MethodWrapper(["checkprogsize"], [".pio/build/nodemcu/firmware.elf"]) Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [=== ] 34.2% (used 27980 bytes from 81920 bytes) Flash: [== ] 25.0% (used 260893 bytes from 1044464 bytes) .pio/build/nodemcu/firmware.elf : section size addr .data 1496 1073643520 .noinit 56 1073645016 .text 240 1074790400 .irom0.text 231724 1075843088 .text1 26557 1074790640 .rodata 876 1073645072 .bss 25608 1073645952 .comment 5066 0 .xtensa.info 56 0 .xt.prop._ZNSt14_Function_baseD2Ev 48 0 .xt.prop._ZSt4swapISt9_Any_dataENSt9enable_ifIXsrSt6__and_IJSt6__not_ISt15__is_tuple_likeIT_EESt21is_move_constructibleIS5_ESt18is_move_assignableIS5_EEE5valueEvE4typeERS5_SF_ 36 0 .xt.lit._ZNKSt8functionIFbvEEclEv 8 0 .xt.lit._ZN7esp826613polledTimeout15timeoutTemplateILb1ENS0_11YieldPolicy9DoNothingENS0_10TimePolicy8TimeUnitINS4_16TimeSourceCyclesELy1000EEEE16expiredRetriggerEv 8 0 .xt.prop._ZNKSt8functionIFbvEEclEv 60 0 .xt.prop._ZN7esp826613polledTimeout15timeoutTemplateILb1ENS0_11YieldPolicy9DoNothingENS0_10TimePolicy8TimeUnitINS4_16TimeSourceCyclesELy1000EEEE16expiredRetriggerEv 84 0 .irom.exceptiontext 18 0 .debug_frame 19444 0 .debug_info 262368 0 .debug_abbrev 48243 0 .debug_loc 142892 0 .debug_aranges 5496 0 .debug_ranges 8952 0 .debug_line 258110 0 .debug_str 34085 0 Total 1071531 <lambda>(["upload"], [".pio/build/nodemcu/firmware.bin"]) AVAILABLE: espota, esptool CURRENT: upload_protocol = esptool MethodWrapper(["upload"], [".pio/build/nodemcu/firmware.bin"]) Use manually specified: /dev/tty.usbserial-210 "/opt/homebrew/Cellar/platformio/5.2.5/libexec/bin/python3.9" "/Users/tcurdt/.platformio/packages/tool-esptoolpy@1.30000.201119/esptool.py" --before default_reset --after hard_reset --chip esp8266 --port "/dev/tty.usbserial-210" --baud 115200 write_flash 0x0 .pio/build/nodemcu/firmware.bin esptool.py v3.0 Serial port /dev/tty.usbserial-210 Connecting.... Chip is ESP8266EX Features: WiFi Crystal is 26MHz MAC: 5c:cf:7f:80:65:07 Uploading stub... Running stub... Stub running... Configuring flash size... Compressed 265040 bytes to 195052... A fatal error occurred: Timed out waiting for packet header *** [upload] Error 2
The upload fails. What could be the problem?