*** [upload] Error 1 'run', '--target', 'upload'" terminated with exit code: 1.

[vasy69]

I have this error and I haven't figured out how to fix it

• Executing task: C:\Users\ionel.platformio\penv\Scripts\platformio.exe run --target upload

Processing melzi (board: sanguino_atmega1284p; platform: atmelavr@~3.4; framework: arduino) -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Verbose mode can be enabled via -v, --verbose option CONFIGURATION: https://docs.platformio.org/page/boards/atmelavr/sanguino_atmega1284p.html PLATFORM: Atmel AVR (3.4.0) > Sanguino ATmega1284p (16MHz) HARDWARE: ATMEGA1284P 16MHz, 16KB RAM, 124KB Flash DEBUG: Current (simavr) On-board (simavr) PACKAGES:

• framework-arduino-avr @ 5.1.0
• tool-avrdude @ 1.60300.200527 (6.3.0)
• toolchain-atmelavr @ 1.70300.191015 (7.3.0) Converting Marlin.ino LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 6 compatible libraries Scanning dependencies... Dependency Graph |-- LiquidCrystal @ 1.5.1 |-- SPI @ 1.0 |-- Wire @ 1.0 Building in release mode Compiling .pio\build\melzi\src\src\inc\Warnings.cpp.o Linking .pio\build\melzi\firmware.elf Checking size .pio\build\melzi\firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [=== ] 25.9% (used 4249 bytes from 16384 bytes) Flash: [======== ] 84.7% (used 107544 bytes from 126976 bytes) Configuring upload protocol... AVAILABLE: arduino CURRENT: upload_protocol = arduino Looking for upload port... Auto-detected: COM4 Uploading .pio\build\melzi\firmware.hex avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x67 avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xda avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x0d avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xd6 avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xf6 avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x0a avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xd6 avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xfe avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x67 avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xda

avrdude done. Thank you.

*** [upload] Error 1 ========================================================================= [FAILED] Took 12.93 seconds ========================================================================= Environment Status Duration

---

melzi FAILED 00:00:12.932 ==================================================================== 1 failed, 0 succeeded in 00:00:12.932 ====================================================================

• The terminal process "C:\Users\ionel.platformio\penv\Scripts\platformio.exe 'run', '--target', 'upload'" terminated with exit code: 1.
• Terminal will be reused by tasks, press any key to close it.