search

plathome / docs

0 stars 1 forks source link

How to connect & get data from sensor FWM8BLZ02 #2

Open TokyoTimo opened 6 years ago

TokyoTimo commented 6 years ago

Can you please also send me information about sensors:

Model:FWM8BLZ02

How to connect them? How to get data from them? What kind of the sensor is it?

daizoom commented 6 years ago

How to connect them? How to get data from them?

Could you please check "Chapter 5 Items Related to Bluetooth Device" on "Web UI Setup Guide" and "Data Acquisition Guide"?

What kind of the sensor is it?

FWM8BLZ02 has temperature and accelerometer sensor.

Vladyslav93 commented 6 years ago

The FWM8BLZ02-109042 model is Bluetooth smart beacon without sensors, and the FWM8BLZ02A-109047 model is a Bluetooth Smart sensor beacon with temperature and accelerometer sensors. I think @daizoom that your sensor has not sensors.

daizoom commented 6 years ago

@Vladyslav93 We support both devices. Could you check "2-1-3. Device Information Transmission Setting" on "Data Acquisition Guide"?

Vladyslav93 commented 6 years ago

@daizoom Yes, I understood that it possible to use both, but if I realized correctly information from the link: https://www.acalbfi.com/nl/IoT-and-Wireless/Bluetooth/p/Bluetooth-Smart-Beacon-with-Sensors/0000008N0S There are 2 types of beacon FWM8BLZ02 this is a just smart beacon and FWM8BLZ02A this is the beacon with the sensor. You should check which type you have.

daizoom commented 6 years ago

@Vladyslav93 I have both types of devices and I guessed you have the beacon with sensors. Therefore I wrote

Could you check "2-1-3. Device Information Transmission Setting" on "Data Acquisition Guide"?

If you have the beacon without sensor, could you refer to "2-1-2. Beacon Transmission Setting" on "Data Acquisition Guide"?

Vladyslav93 commented 6 years ago

@daizoom How to work with beacons, if I need to disable "Data Acquisition" to have the possibility to connect to the beacon, and from another side, I need to enable it to work with beacon sensor data???? Could you please help?

daizoom commented 6 years ago

@Vladyslav93 In case to detect ble beacon on Web UI, you need to disable "Data Acquisition", but when getting data, you need to enable "Data Acquisition".