search

plmilord / Hass.io-custom-component-spaclient

Home Assistant integration - Spa Client
47 stars 16 forks source link

Entity missing? #20

Closed enkrypt3d closed 2 years ago

enkrypt3d commented 2 years ago

I used to have an orange graph that showed the entity for when the heater is running....

image

Now it's completely gone. On the latest version of HA.

plmilord commented 2 years ago

Everything's fine on my side... Here's my setup:

Home Assistant Core 2022.5.5 Home Assistant Supervisor 2022.05.3 Home Assistant OS 8.1

Sounds like a web browser cache issue!?

Have you tried:

Let me know your walkthrough...

plmilord commented 2 years ago

No need to show the heater heating as there's no heating... your target temperature was 50F and your current temperature was close to 80F, dropping! It also looks like you have disabled the temperature range and heating mode (because the current temperature reading goes to nothing at times... normal behavior of your controller).

enkrypt3d commented 2 years ago

ok once it cools down I'll run it again and see if the entity shows up... odd that it just disappears though when it's not in use?

plmilord commented 2 years ago

...and, everything's come back to normal?

enkrypt3d commented 2 years ago

we can close this for now. I'll re-open it later on this year when it's hot tub season if there is an issue. Thanks for your support!