search

pocopico / tinycore-redpill

GNU General Public License v3.0
2.18k stars 643 forks source link

rploader.sh satamap "lspci: -s: Invalid slot number" #119

Closed montvid closed 2 years ago

montvid commented 2 years ago

The problem is that satamap does not map the 10 SCSI/HBA drives with error lspci: -s: Invalid slot number . When I install the dsm it works but I see only 6 drives. Appreciate any help with this.

tc@box:~$ ./rploader.sh satamap
Found SCSI HBAs, We need to install the SCSI modules
scsi-5.10.3-tinycore64 is already installed!
Succesfully installed SCSI modules

Found "00:11.4 Intel Corporation C610/X99 series chipset sSATA Controller [AHCI mode] (rev 05)"
Detected 4 ports/0 drives. Bad ports: -1 0. Override # of ports or ENTER to accept <4>

Found "00:1f.2 Intel Corporation C610/X99 series chipset 6-Port SATA Controller [AHCI mode] (rev 05)"
Detected 6 ports/0 drives. Bad ports: 1 2 3 4. Override # of ports or ENTER to accept <6>

Found SCSI/HBA "03:00.0 LSI Logic / Symbios Logic MegaRAID SAS-3 3108 [Invader] (rev 02)" (10 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid bus number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (73 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)

Computed settings:
SataPortMap=46
DiskIdxMap=0004

WARNING: Bad ports are mapped. The DSM installation will fail!
montvid commented 2 years ago

Disabled internal sata controller and the problem is fixed. Only the SCSI/HBA controler is left with all disks working. Dell NX3230 works like a charm :)

./rploader.sh satamap now
Found SCSI HBAs, We need to install the SCSI modules
scsi-5.10.3-tinycore64 is already installed!
Succesfully installed SCSI modules

Found SCSI/HBA "03:00.0 LSI Logic / Symbios Logic MegaRAID SAS-3 3108 [Invader] (rev 02)" (10 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid bus number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (73 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)

Computed settings:
SataPortMap=1
DiskIdxMap=00