Open sberrett opened 1 year ago
Can you please check the serial console ?
Please see below
{syno_ttyS_read}
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
:: Starting syslogd ... [ OK ]
[ 44.505122] <redpill/intercept_execve.c:82> Blocked /usr/syno/bin/syno_pstore_collect from running
:: Starting scemd
[ 49.536696] <redpill/bios_shims_collection.c:51> mfgBIOS: nullify zero-int for VTK_SET_DISK_LED
[ 50.892900] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={2d} ascii="-"
[ 51.053562] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={33} ascii="3"
[ 51.054540] <redpill/pmu_shim.c:239> Executing cmd OUT_BUZ_LONG handler cmd_shim_noop+0x0/0x2d [redpill]
[ 51.054540] <redpill/pmu_shim.c:45> vPMU received OUT_BUZ_LONG using 1 bytes - NOOP
[ 51.204429] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={2d} ascii="-"
[ 51.364936] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={34} ascii="4"
[ 51.365877] <redpill/pmu_shim.c:239> Executing cmd OUT_PWR_LED_ON handler cmd_shim_noop+0x0/0x2d [redpill]
[ 51.365877] <redpill/pmu_shim.c:45> vPMU received OUT_PWR_LED_ON using 1 bytes - NOOP
[ 51.544379] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={2d} ascii="-"
[ 51.748977] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={6b} ascii="k"
[ 51.749367] <redpill/bios_shims_collection.c:58> mfgBIOS: nullify zero-int for VTK_SET_PHY_LED
[ 51.769407] <redpill/pmu_shim.c:234> Unknown 1 byte PMU command with signature hex="6b" ascii="k"
[ 51.786332] <redpill/memory_helper.c:17> Disabling memory protection for page(s) at ffffffffa047a780+12/1 (<<ffffffffa047a000)
[ 51.797694] <redpill/override_symbol.c:238> Obtaining lock for <GetHwCapability+0x0/0xe0 [broadwellnk_synobios]/ffffffffa047a780>
[ 51.813689] <redpill/override_symbol.c:245> Writing original code to
The build went without a hitch but I am unable to get an ip address after rebooting. Please advise how I can recover this situation.
TCRP Friend Version 0.0.5 Setting MAC from xxxxxxxxxx to xxxxxxxxxxx:05 ERROR Could not get IP Detecting upgrade: Ramdisk OK ↑ zImage OK ! Machine is VIRTUAL and the Hypervisor is KVM Loader BUS: ata Running on 2 Processor Connon KVM processor With 1.9G Memory System has 1 HBAs and 2 Network cards IP Address : Model: DS3622xs+, Serial: xxxxxxx, Mac: xxxxxxxxxxx DSM Version: 7.2.0-64551 Update: 0 RedPill Make : prod zImage: /mnt/tcrp/zImage-dsm initrd: /mnt/tcrp/initrd-dsm cndline withefi earlyprintk syno_hu_version=DS3622xs+ console=ttyS0,1152008 netif_num=1 pid=0xa4a5 earlycon-uart8250, lo, 0x3f8 ,115200n8 synoboot_satadom=1 syno_port_thaw=1 mac1=xxxxxxxxxxxxxxx sn xxxxxxxxxxxxx vid-0x0525 elevator elevator loglevel=15 HddHot plug=0 DiskIdxMap-10 syno_hdd_detect 0 vender_format_version-2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/mde SataPortMap 1 dom_szmax=1024 Boot timeout exceeded, booting... 0 Loading kexec, nothing will be displayed here anymore...