search

polarfire-soc / polarfire-soc-documentation

PolarFire SoC Documentation
Other
41 stars 22 forks source link

Icicle board default binaries (uboot/Linux + HSS) #90

Closed kowalski100 closed 2 years ago

kowalski100 commented 2 years ago

Hi,

The Icicle board has default u-boot version 2020.01. The .wic images shared on this repo contains later version.

Is there a link pointing to default versions binaries (uboot, linux + supported HSS .jobs files)?

vfalanis commented 2 years ago

Hi,

The following binaries/assets can be downloaded from our repos:

  1. Pre-built WIC images per release from the release page
  2. Job files per release from the Icicle Kit reference design release page

If required, it is possible to extract the U-boot and a fitImage (Linux + DTB) from a WIC image from a particular release. For an example on how to extract U-Boot from a WIC file please refer to this link

The table below contains the versions of the binaries used in some of our most recent releases: PolarFire SoC Yocto Release U-Boot Linux HSS Reference Design
v2021.11 2021.07 5.12.19 v0.99.26 v2021.11
v2021.08 2021.04 5.12.1 v0.99.23 v2021.08
v2021.04 2020.1 5.6.18 v0.99.16 v2021.04
v2021.02 2020.1 5.6.18 v0.99.15 v2021.02
v2020.11 2020.07 5.3.18 v0.99.14 v2020.11
kowalski100 commented 2 years ago

Hi,

None of the above mentioned releases contains default images on the icicle board. As I mentioned in the thread, the default u-boot version prints 2020.01. We want the board to get back to default state and for that default binaries are needed.

vfalanis commented 2 years ago

Hi,

You can get the default Icicle Kit image and HSS job file from this link.