Closed mcnamarabryan closed 2 years ago
Is this a lemp9 or a lemp10? Does toggling the fan speed with Fn
+1
make any difference?
Also, it seems hard to believe 21.10 would be responsible for something like this. Any chance you were previously running an older version of Pop, and did it happen on that version?
lemp9. I'll keep the shortcut in mind to try if the issue persists.
One note that rebooting did not resolve it. At login I used the power button to enter and exit suspend, the fans running the whole time, and upon resuming the fans followed a curve to a nominal speed.
On 20.04 there were times when the laptop would be suspended and plugged in, and I would notice that the fans were running full bore for some reason. I'm not certain if they are the same issue, and whether 21.10 is responsible, but I wanted to log the problem since I'm running 21.10.
Very strange. Thanks for the info though. I'll make a note to investigate with one of our lemp9's when I get a chance.
Closing to archive, no specific 21.10 issue identified.
How did you upgrade to 21.10? (Fresh install / Upgrade)
Fresh install.
Related Application and/or Package Version (run
apt policy $PACKAGE NAME
):None.
Issue/Bug Description: Fans are running at full speed. System use is minimal, no process is showing as using CPU. CPU temps are normal (pasted below).
`coretemp-isa-0000 Adapter: ISA adapter Package id 0: +32.0°C (high = +100.0°C, crit = +100.0°C) Core 0: +31.0°C (high = +100.0°C, crit = +100.0°C) Core 1: +32.0°C (high = +100.0°C, crit = +100.0°C) Core 2: +30.0°C (high = +100.0°C, crit = +100.0°C) Core 3: +32.0°C (high = +100.0°C, crit = +100.0°C)
nvme-pci-0200 Adapter: PCI adapter Composite: +24.9°C (low = -5.2°C, high = +79.8°C) (crit = +84.8°C)
system76_acpi-acpi-0 Adapter: ACPI interface CPU fan: 7309 RPM CPU temp: +100.0°C
iwlwifi_1-virtual-0 Adapter: Virtual device temp1: +28.0°C
pch_cannonlake-virtual-0 Adapter: Virtual device temp1: +31.0°C
nvme-pci-0300 Adapter: PCI adapter Composite: +23.9°C (low = -5.2°C, high = +79.8°C) (crit = +84.8°C)
BAT0-acpi-0 Adapter: ACPI interface in0: 8.20 V
curr1: 672.00 mA `
Steps to reproduce (if you know): Allow computer to suspend from screen blank followed by auto-suspend.
Expected behavior: Fans run at a speed according to temperatures.
Other Notes: