search

portapack-mayhem / mayhem-firmware

Custom firmware for the HackRF+PortaPack H1/H2/H4
https://hackrf.app
GNU General Public License v3.0
3.49k stars 564 forks source link

Mayhem & HackRF rev (R9) Transmit Bug Chinese version #1514

Closed Tanamichi closed 1 year ago

Tanamichi commented 1 year ago

(Please try the latest nightly release before submitting this. You can find the latest nightly version here: https://github.com/eried/portapack-mayhem/releases) (no nightly versions before issue)

Describe the bug Transmitting not working properly, it emits only carrier no modulation. Tested on all transmit modes, no effect. Replay mode same not working. Signal gen not working too.

On HackRF mode working with sdrangel work normally.

To Reproduce Steps to reproduce the behavior:

  1. Try transmit something, microphone, SSTV, etc...
  2. See in another SDR receiver on transmitted carrier

Expected behavior Working modulation and hear transmitted signal

Affected versions

Additional I'm tried all solutions found here, but transmit not working as well. Reference source changing not affect on transmit. I'm using Portapack TCXO. SCR_0008 Gain and AMP work properly, no burned parts ;) Also tested with full output power, still no effect.

Peripherals on screenshot: SCR_0009

SD card test looks well(experimental 16gb) SCR_0010

any ideas to get working transmit mode on portapack? Also found bug: receive not working after transmitting something, it's start working after reboot. if needed i will open a new issue.

DavidIgor commented 1 year ago

@Tanamichi how one know if rf component/blown?

Brumi-2021 commented 1 year ago

Hi @Tanamichi Pls check #466 , and let us know if it solves your problem .

Cheers

viorellu commented 1 year ago

Hello,

I can confirm replay with Portapack not working. Whenever I record something from my walkie talkie and send the signal back only noise is heard. Strangely enough, I can capture chat messages from and replay them to a flipper zero consistently. @Brumi-2021 Thank you , I will look into updating the SPI firmware.

Tanamichi commented 1 year ago

@Tanamichi how one know if rf component/blown? try set different Gain or AMP values, and check these values affects on signal reception or transmitting most blown IC in hackRF is amplifiler in RF part.

Thanks @Brumi-2021 i will check now.

Tanamichi commented 1 year ago

Hi @Tanamichi Pls check #466 , and let us know if it solves your problem .

Cheers

flashing CPLD solved problem, thanks! You can close the issue.

Brumi-2021 commented 1 year ago

Thanks very much for your confirmation ! Very happy and glad ! 👏👏👏👏 Then let's close it

sipcz commented 9 months ago

Hi, I have a similar problem with my device! Is it possible to fix it on windows? Thank you for your reply