Closed pe2ben closed 5 months ago
I'll assume that you're turning the encoder dial when the field is selected. If the encoder dial is not working, can you try it in the Debug -> ButtonsTest app?
If the encoder dial is not working in that app either, please run the Debug -> DebugDump app (which saves P.Mem contents to a file for debug), and then try resetting P.Mem to default values using the Settings -> P.MemoryManagement app.
If resetting P.Mem to defaults resolves the encoder issue, then please attach the output file from the DebugDump to help us determine how P.Mem got corrupted. If resetting P.Mem doesn't help, I'd suspect a hardware issue (unless you can find an older version of firmware where the encoder is working).
Hi Mark, this is a H1 version Portapack no dial. only up, down, left, right and select. reset P.mem defaults havo no effect. Thanks Ben
Op 13-03-2024 17:22 CET schreef Mark Thompson @.***>:
I'll assume that you're turning the encoder dial when the field is selected. If the encoder dial is not working, can you try it in the Debug -> ButtonsTest app?
If the encoder dial is not working in that app either, please run the Debug -> DebugDump app (which saves P.Mem contents to a file for debug), and then try resetting P.Mem to default values using the Settings -> P.MemoryManagement app.
If resetting P.Mem to defaults resolves the encoder issue, then please attach the output file from the DebugDump to help us determine how P.Mem got corrupted. If resetting P.Mem doesn't help, I'd suspect a hardware issue (unless you can find an older version of firmware where the encoder is working).
— Reply to this email directly, view it on GitHub https://github.com/portapack-mayhem/mayhem-firmware/issues/1988#issuecomment-1994864539, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEEC3N2ZD4BEJ7TUO6DZEL3YYB4MZAVCNFSM6AAAAABEUOBBPCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUHA3DINJTHE. You are receiving this because you authored the thread.Message ID: @.***>
Sorry I'm unfamiliar with the old H1 model. On H1, how do you scroll through the options for any field?
Hello Mark, this is a user error (i play a long time now with the H2 version and forgot the correct usage from the H1. Case can be closed. Thanks Ben
Op 13-03-2024 19:01 CET schreef Mark Thompson @.***>:
Sorry I'm unfamiliar with the old H1 model. On H1, how do you scroll through the options for any field?
— Reply to this email directly, view it on GitHub https://github.com/portapack-mayhem/mayhem-firmware/issues/1988#issuecomment-1995203815, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEEC3N6T2EXSTXH7JQ6US53YYCIBPAVCNFSM6AAAAABEUOBBPCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJVGIYDGOBRGU. You are receiving this because you authored the thread.Message ID: @.***>
Describe the bug.
In the Receive/Audio App i can't change the volume and the mode,
Reproduction
switch on select "receive" then "audio" then mode or volume => i can't change values
Expected behavior
i would can change the mode and the volume value
Environment/versions
version 0.19 and also 2.0
Anything else?
No response