search

portapack-mayhem / mayhem-firmware

Custom firmware for the HackRF+PortaPack H1/H2
GNU General Public License v3.0
3.05k stars 520 forks source link

Pocsag not showing messages #2004

Closed m1ctk closed 4 months ago

m1ctk commented 4 months ago

Describe the bug.

All I get are short lines with F0 or F2 at the end. No actual messages as I do with PDW on the pc. I have the amp on and LNA at 40 Anyone having problems ?

Reproduction

switch on go to pocsag app

Expected behavior

I was expecting full messages to be shown as on the windows PDW prog

Environment/versions

No response

Anything else?

no

f1ghy commented 4 months ago

Hi, hummm, i try it, and i have also lot of pink "to many decode errors"... maybe need to try olders releases... interesting 🤔

f1ghy commented 4 months ago

Hi, After a good night during a lotof pink "to many decode errors" PP is now verry slow. At the quick reboot, the splach screen come verry slowly... then after real OFF, then wait a bit, then ON all is fine !!! Memory Link ?

gullradriel commented 4 months ago

Amp ON and LNA 40 looks a bit high. Maybe you are over saturating the decoder. Check RxSaturation with DFU or Level app. It should be around 80% or less,

m1ctk commented 4 months ago

OK I've got 24 32 now and the amp off and reception appeared to be better but I am still not getting messages

m1ctk commented 4 months ago

OK so all good now, it was just a case of shifting the frequency 5 khz down, just wish you could scroll up with the main knob

NotherNgineer commented 4 months ago

OK so all good now, it was just a case of shifting the frequency 5 khz down, just wish you could scroll up with the main knob

BTW, if you'd like some change to the scrolling behavior, please clarify what you mean (and ideally submit an Enhancement request)