search

portapack-mayhem / mayhem-firmware

Custom firmware for the HackRF+PortaPack H1/H2/H4
https://hackrf.app
GNU General Public License v3.0
3.3k stars 540 forks source link

Power lock button (not an issue) #2104

Closed D0lby55 closed 5 months ago

D0lby55 commented 5 months ago

Description of the feature you're suggesting.

This is a "Power button" with a ring lock! with this a PPH2 can travel in you're pocket! you can lock the power button by unscrew the ring! there two model Normal and Mayhem!

Ring

Normal

M

button.zip

Anything else?

No response

NotherNgineer commented 5 months ago

IMO, I don't think Github Mayhem Firmware Issues is the correct place to post this. I would suggest moving this discussion to the Discord channel, or to some 3-D design site such as Thingiverse.

The power button on the H2 is of course the rotary encoder. It doesn't look like it'd be easy to spin the encoder dial on either version of this, especially without rotating the ring lock.

Thirdly, each time you lock the knob it'll pull the knob out a little bit so eventually the knob comes off (I guess you could solve that by gluing the knob to the shaft but normally we don't do that because the case needs to be removed frequently e.g. to replace the coin cell, and pulling on the shaft too hard [including over-tightening this lock] may damage the encoder).

D0lby55 commented 5 months ago

sorry you can remove it, that's only to lock the push button you could alway's spin it!

zxkmm commented 5 months ago

Thanks for sharing! You can share it in this Discord server: https://discord.gg/PeNJBAN3 If you don't mind, I'm going to close this ticket (since it's not an issue) But if you want some discussions based on this topic, feel free to re-open it.