search

portapack-mayhem / mayhem-firmware

Custom firmware for the HackRF+PortaPack H1/H2/H4
https://hackrf.app
GNU General Public License v3.0
3.38k stars 550 forks source link

Sound settings in audio determine reception #569

Closed loewal closed 2 years ago

loewal commented 2 years ago

Describe the bug

Release of 12-04-2022. When trying to receive ADSB, but before accidentally selected SPEC, AM or WFM in audio, there is no reception. Goes for pocsag too. Pocsag only works when selecting nfm before in audio, so I believe, that some modes don't have their own settings. Also the speaker-icon is green, when there is no sound selectable, e.g. adsb.

To Reproduce Steps to reproduce the behavior:

  1. Go to 'receive'
  2. Tap on 'audio'
  3. etc...

Expected behavior The right reception. On ADSB NFM is NOT working.

Affected versions Please write any difference related with the Expected behavior, on the following versions:

Additional If the bug is difficult to explain, additionally to the text please include images and videos.

jLynx commented 2 years ago

When you say no reception, do you mean white noise? Also what portapack version are you using? (H1, H2 etc)

loewal commented 2 years ago

I own the H1. Yes indeed, white noise. Going back to 09-04-2022 brings reception of NFM back.

jLynx commented 2 years ago

Can you please add me on Discord so I can send you a custom firmware to test out jLynx#7987

loewal commented 2 years ago

I am using discord. Do you put it in the testdrive?

jLynx commented 2 years ago

Send me a DM and I'll send you a custom one

loewal commented 2 years ago

I added you

jLynx commented 2 years ago

Issue is in POCSAG, if you go into audio and select NFM then back into POCSAG it works fine. But if you changed it to SPEC and then went back into POCSAG it does not work

loewal commented 2 years ago

Correct! On 12 Apr 2022, 10:04 +0200, jLynx @.***>, wrote:

Issue is in POCSAG, if you go into audio and select NFM then back into POCSAG it works fine. But if you changed it to SPEC and then went back into POCSAG it does not work — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: @.***>

jLynx commented 2 years ago

The fix will be to just default it back to NFM when you open the app. Note: Logging should also be off by default

loewal commented 2 years ago

Hi, I saw, that you solved the audio-problem. May I ask again to look at the Pocsag-settings? They work only, when I set NFM in the audio-app beforehand and remove the ✅ in the Pocsag in "ignore address.." Can you also default logging to "no"? Thanks!!

ArjanOnwezen commented 2 years ago

@loewal Please check latest nightly tomorrow. Should include fixed modulation. For other (enhancements), please create a separate ticket.