Closed cneth closed 8 years ago
Yes, you can specify which network interface to use. In you PX configuration file at /etc/pwx/config.json add the following two fields.
"mgtiface":
Your config file will look something like this if the interface is "eth0" : { "clusterid": "make this unique in your k/v store", "mgtiface": "eth0", "dataiface":"eth0", "kvdb": [ "etcd:https://[username]:[password]@[string].dblayer.com:[port]" ], "storage": { "devices": [ "/dev/xvdb", "/dev/xvdc" ] } }
Let us know if you face any problems.
Assuming this is resolved?
I am trying to run px-dev on a CoreOS system that has DC/OS V1.7.2 installed. DC/OS V1.7.2 introduces a DNS forwarder called 'Spartan'; the way it works is to create a new virtual network interface called 'Spartan' which has it's own IP address; all the entries in /etc/resolv.conf are then pointed at that IP address range. (See below for what ifconfig and /etc/resolv.conf look like in this environment.)
This confuses portworx; when it starts up it seems to think that it should use this interface for communication. This leads to errors:
2016/07/18 21:24:14 [WARN] memberlist 198.51.100.1: Refuting a suspect message (from: df125a7a-e77b-4e5c-a29f-f16f9cba4624) 2016/07/18 21:24:16 [WARN] memberlist: Was able to reach e57572a7-d55f-48eb-89f3-f18ad0d27433 via TCP but not UDP, network may be misconfigured and not allowing bidirectional UDP 2016/07/18 21:24:21 [WARN] memberlist: Was able to reach fa21d6ef-48dc-43b7-84ff-67eaebb00c05 via TCP but not UDP, network may be misconfigured and not allowing bidirectional UDP 2016/07/18 21:24:26 [WARN] memberlist: Was able to reach e57572a7-d55f-48eb-89f3-f18ad0d27433 via TCP but not UDP, network may be misconfigured and not allowing bidirectional UDP
You can also see below that it is using the ip address in the pxctl output.
I had this working before the DC/OS upgrade added this new interface, but now it's stuck in a weird state. Is there any way to tell the container which interface it should bind to?
Thanks,
Craig
sudo /opt/pwx/bin/pxctl status Status: PX is operational Node ID: df125a7a-e77b-4e5c-a29f-f16f9cba4624 IP: 198.51.100.1 Local Storage Pool: 14 devices Device Path Caching Tier Size Used Last-Scan 1 /dev/sdo 5.5 TiB 751 MiB 18 Jul 16 21:15 UTC 10 /dev/sdf 5.5 TiB 731 MiB 18 Jul 16 21:15 UTC 11 /dev/sdj 5.5 TiB 1.7 GiB 18 Jul 16 21:15 UTC 12 /dev/sdl 5.5 TiB 1.7 GiB 18 Jul 16 21:15 UTC 13 /dev/sdb 5.5 TiB 739 MiB 18 Jul 16 21:15 UTC 14 /dev/sdg 5.5 TiB 739 MiB 18 Jul 16 21:15 UTC 2 /dev/sda 5.5 TiB 731 MiB 18 Jul 16 21:15 UTC 3 /dev/sdh 5.5 TiB 731 MiB 18 Jul 16 21:15 UTC 4 /dev/sde 5.5 TiB 731 MiB 18 Jul 16 21:15 UTC 5 /dev/sdi 5.5 TiB 731 MiB 18 Jul 16 21:15 UTC 6 /dev/sdk 5.5 TiB 731 MiB 18 Jul 16 21:15 UTC 7 /dev/sdc 5.5 TiB 731 MiB 18 Jul 16 21:15 UTC 8 /dev/sdd 5.5 TiB 731 MiB 18 Jul 16 21:15 UTC 9 /dev/sdm 5.5 TiB 731 MiB 18 Jul 16 21:15 UTC total - 76 TiB 12 GiB Cluster Summary ID: 5ac2ed6f-7e4e-4e1d-8e8c-3a6df1fb7801 IP: 198.51.100.1 - Capacity: 77 TiB/19 MiB OK (This node) IP: 10.1.20.1 - Capacity: 77 TiB/19 MiB OK IP: 10.1.19.1 - Capacity: 77 TiB/173 MiB OK IP: 10.1.18.1 - Capacity: 77 TiB/19 MiB OK Global Storage Pool Total Capacity : 308 TiB Total Used : 230 MiB
Craig
montana@node-1-17 ~ $ ifconfig spartan spartan: flags=195<UP,BROADCAST,RUNNING,NOARP> mtu 1500 inet 198.51.100.1 netmask 255.255.255.255 broadcast 0.0.0.0 inet6 fe80::48e4:78ff:fef6:bfb prefixlen 64 scopeid 0x20 ether 4a:e4:78:f6:0b:fb txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 21972 bytes 7314572 (6.9 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
montana@node-1-17 ~ $ cat /etc/resolv.conf
Generated by gen_resolvconf.py. Do not edit.
Change configuration options by changing DCOS cluster configuration.
This file must be overwritten regularly for proper cluster operation around
master failure.
options timeout:1 options attempts:3
nameserver 198.51.100.1 nameserver 198.51.100.2 nameserver 198.51.100.3