akoun
commented
2 years ago Hello,
I was able to resolve my problem of usb transfer time-outs. Here is the workaround: I downgraded the FPGA image to: 2019-07-31 - v0.11.0 and the FX3 firmware to: 2018-12-16 - v2.3.2
and then the errors disappeared...
I am under Debian bookworm with libbladerf version 0.2021.10-2 (I was planning to downgrade this as well to 0.2019.07-7 but finally it was not necessary).
I hope this can be helpful because I chased my tail around for a while with this one.
cheers, aK
davwheat
Hello I try to test BladeRF under Pothos (built from source) and I get strange errors when using the bladerf soapy sink
[22:22:54.214000] SoapySDR: bladerf_open_with_devinfo() [22:22:54.394000] SoapySDR: bladerf_get_serial() = 1d62a870f59e65fdd231ced37787b03a [22:22:54.401000] SoapySDR: setSampleRate(Rx, 0, 4.000000 MHz), actual = 4.000000 MHz [22:22:54.409000] SoapySDR: setSampleRate(Tx, 0, 4.000000 MHz), actual = 4.000000 MHz [22:22:54.417000] SoapySDR: setSampleRate(Rx, 0, 4.800000 MHz), actual = 4.800000 MHz [22:22:54.421000] ::1: [INFO @ fpga_common/src/lms.c:2258] Clamping frequency to 237500000Hz [22:23:04.972000] ::1: [INFO @ fpga_common/src/lms.c:2258] Clamping frequency to 237500000Hz [22:23:05.017000] : 0 [22:23:05.248000] ::1: [ERROR @ host/libraries/libbladeRF/src/streaming/sync.c:336] wait_for_buffer: Timed out waiting for buf_ready after 1 ms [22:23:05.249000] ::1: [ERROR @ host/libraries/libbladeRF/src/streaming/sync.c:336] wait_for_buffer: Timed out waiting for buf_ready after 1 ms [22:23:05.250000] ::1: [ERROR @ host/libraries/libbladeRF/src/streaming/sync.c:336] wait_for_buffer: Timed out waiting for buf_ready after 1 ms [22:23:05.348000] ::1: [ERROR @ host/libraries/libbladeRF/src/streaming/sync.c:336] wait_for_buffer: Timed out waiting for buf_ready after 1 ms [22:23:05.349000] ::1: [ERROR @ host/libraries/libbladeRF/src/streaming/sync.c:336] wait_for_buffer: Timed out waiting for buf_ready after 1 ms [22:23:05.350000] ::1: [ERROR @ host/libraries/libbladeRF/src/streaming/sync.c:336] wait_for_buffer: Timed out waiting for buf_ready after 1 ms [22:23:05.447000] ::1: [ERROR @ host/libraries/libbladeRF/src/streaming/sync.c:336] wait_for_buffer: Timed out waiting for buf_ready after 1 ms [22:23:05.448000] ::1: [ERROR @ host/libraries/libbladeRF/src/streaming/sync.c:336] wait_for_buffer: Timed out waiting for buf_ready after 1 ms [22:23:05.449000] ::1: [ERROR @ host/libraries/libbladeRF/src/streaming/sync.c:336] wait_for_buffer: Timed out waiting for buf_ready after 1 ms [22:23:05.547000] ::1: [ERROR @ host/libraries/libbladeRF/src/streaming/sync.c:336] wait_for_buffer: Timed out waiting for buf_ready after 1 ms .....
the flowgraph is stuck and does not do anything. In gnuradio-companion the BladeRF source behaves similarly but curiously when gr-osmosdr source everything works nicely.
If somebody can help I'd greatly appreciate because I am completely stuck with this. best regards aK