SoapySDR::Device::readStream timeout! Rsp1

Morning, I am running Openwebrx + and getting a lot of SoapySDR::Device::readStream timeout! and failing to start. I can see my device using radio@openwebrxplus:~ $ SoapySDRUtil --probe="driver=sdrplay" ######################################################

Soapy SDR -- the SDR abstraction library

######################################################

Probe device driver=sdrplay [INFO] devIdx: 0 [INFO] SerNo: B0001P0001 [INFO] hwVer: 1 [INFO] rspDuoMode: 0 [INFO] tuner: 1 [INFO] rspDuoSampleFreq: 0.000000

-- Device identification

driver=SDRplay hardware=RSP1 sdrplay_api_api_version=3.070000 sdrplay_api_hw_version=1

-- Peripheral summary

Channels: 1 Rx, 0 Tx Timestamps: NO Other Settings:

RF Gain Select - RF Gain Select [key=rfgain_sel, default=1, type=string, options=(0, 1, 2, 3)]
IQ Correction - IQ Correction Control [key=iqcorr_ctrl, default=true, type=bool]
AGC Setpoint - AGC Setpoint (dBfs) [key=agc_setpoint, default=-30, type=int, range=[-60, 0]]

-- RX Channel 0

Full-duplex: YES Supports AGC: YES Stream formats: CS16, CF32 Native format: CS16 [full-scale=32767] Antennas: RX Corrections: DC removal Full gain range: [20, 59] dB IFGR gain range: [20, 59] dB RFGR gain range: [0, 3] dB Full freq range: [0.01, 2000] MHz RF freq range: [0.01, 2000] MHz CORR freq range: MHz Sample rates: 0.0625, 0.096, 0.125, 0.192, 0.25, ..., 6, 7, 8, 9, 10 MSps Filter bandwidths: 0.2, 0.3, 0.6, 1.536, 5, 6, 7, 8 MHz

But fails to start in browser. Any suggestions how to fix please. Cheers Kev

@kevtheskin - you may want to try to run SoapySDRUtil in stream test mode to see if SoapySDR is able to read the sample stream from your RSP1.

The command to do that is:

SoapySDRUtil --args="driver=sdrplay" --rate=2e6 --direction=RX

The output from that command should look more or less like this:

Stream format: CS16
Num channels: 1
Element size: 4 bytes
Begin RX rate test at 2 Msps
Starting stream loop, press Ctrl+C to exit...
1.8881 Msps 7.55242 MBps
1.94578 Msps    7.78311 MBps
1.96186 Msps    7.84745 MBps
1.972 Msps  7.88801 MBps
1.97806 Msps    7.91223 MBps

If you see timeout errors or the sample rates are very different from what I see here, then we probably need to troubleshoot what's going on with your RSP1. On the other hand if this test is successful, then we should take a look at the SDR client application you are running there to see where the problem might be.

Franco

pothosware / SoapySDR